JBL ON BEAT AIR (serv.man3) EMC - CB Certificate ▷ View online
ATTACHMENT
National Differences
Page 104 of 116
Report No.: 11023927 001
National Differences
Clause
Requirement + Test
Result – Remark
Verdict
f: with silicon resin.
g: inorganic
Notes:
g: inorganic
Notes:
1) value applies to hard mica-made heating substrate.
2) value applies to soft mica-made heating substrate.
Remarks: value in parenthesis is applied when mechanical external force is absent.
Organic materials (Thermosetting Resins)
Material
Organic materials (Thermosetting Resins)
Material
Permissible temperature limit (ºC)
laminated melamine resin mixed with glass fiber
75, (100) 1)
moulded lemaine resin mixed with:
cellulose
inorganics
cellulose
inorganics
120
140
laminated phenol resin with:
cotton fiber base
paper base
polyamide cloth base
inorganics
paper base
polyamide cloth base
inorganics
115, (85) 2)
120, (70) 3)
75
140
moulded phenol resin with:
inorganics
others
inorganics
others
150, (160) 1)
140, (150) 1)
moulded melamine phenol resin with the gravity of less
than 1.55
than 1.55
130
moulded urea resin mixed with cellulose
90
unsaturated polyester-casting
120
laminated unsaturated polyester mixed with inorganics
140
moulded unsaturated polyester mixed with:
other than organics
inorganic powder
glass fiber
other than organics
inorganic powder
glass fiber
120
140
155
epoxy resin-casting
120
laminated epoxy resin mixed with:
inorganic
other than inorganics
inorganic
other than inorganics
130, (140) 1)
110, (90) 3)
moulded epoxy resin mixed with inorganics
130
laminated diallyl phthalate resin mixed with inorganics
140
moulded diallyl phthalate resin mixed with:
other than inorganics
inorganic powder
glass fiber
inorganic powder
glass fiber
130
150
155
xylene resin-casting
140
polyamide-imide film
180
laminated silicone resin mixed with inorganics
180, (220) 1)
moulded silicon resins mixed with inorganics
180, (240) 4)
polymide film
210
laminated polymide
190
polybutadiene-casting
120
moulded polybutadiene mixed with inorganics
130
laminated dipheny oxide mixed with inorganics
180
Notes:
1) Values apply to thermal insulating materials.
2) Values apply to materials with a thickness less than 0.8 mm.
3) Values apply to materials with a thickness less than 0.8 mm when treated to retard flame.
4) Values apply to materials used for thermal insulation and to seal outlets of sheathed heating
3) Values apply to materials with a thickness less than 0.8 mm when treated to retard flame.
4) Values apply to materials used for thermal insulation and to seal outlets of sheathed heating
wires.
Organic materials (Thermoplastic Resins)
Organic materials (Thermoplastic Resins)
ATTACHMENT
National Differences
Page 105 of 116
Report No.: 11023927 001
National Differences
Clause
Requirement + Test
Result – Remark
Verdict
Material
Permissible temperature
limit (ºC)
limit (ºC)
methacrylic resin, cellulose resin, cellulose acetate butylate resin,
ulcanise, polyethylene
ulcanise, polyethylene
50
foamed polyethylene compound for insulated conductors, polyvinyl
chloride
chloride
60
polyethylene compound for insulated conductors, heat-resistant
polyvinyl chloride,
cross-linked polyvinyl chloride compound for insulated conductors
polyvinyl chloride,
cross-linked polyvinyl chloride compound for insulated conductors
75
cross-linked polyethylene, chlorinated polyethylene compound for
insulated conductors
insulated conductors
90
acrylonitrile acrylic rubber styrene resin, acrylontirile chlorinate
polyethylene styrene resin
polyethylene styrene resin
55
acrylonitrile styrene resin, acrylonitrile butadiene resin,
acrylonitrile butadiene chlorinated polyethylene resin
acrylonitrile butadiene chlorinated polyethylene resin
: general
: reinforced with glass fiber
55
80
polypropylene
: general
: reinforced with glass fiber
105, (85) 3)
110
110
denatured polyphenyle oxide
: general
: reinforced with glass fiber
75
100
100
Polystyrene
50, (70) 1)
polyacetal
: general
: reinforced with glass fiber
100
120
120
polyamide
: general
: reinforced with glass fiber
90
120
120
polycarbonate
: general
: reinforced with glass fiber
110
120
120
polyethylene terephtalate : general
: reinforced with glass fiber
120
130
130
polybutylene terephtalate : general
: reinforced with glass fiber
120
135
135
heat resistant polyethylene terephthalate film
135
fluorinated polyvinylidene compound for insulated conductors,
polychlorotrifluoroethylene (ethylene-trifluoride resin), ethylene-
tetrafleorethylene copomylene for insulated conductors
polychlorotrifluoroethylene (ethylene-trifluoride resin), ethylene-
tetrafleorethylene copomylene for insulated conductors
150
tetrafluoroethylene hexafluoropropylene resin
200
polytetrafluoroethylene(ethylene-tetrafluoride), perflouroalkoxy
compound for insulated conductors
compound for insulated conductors
250
aramide(aromatic polyamide paper)
220
Polysulfone
140, (150) 2)
polyethylene naphthalate
155
polyallylate
: general
: reinforced with glass fiber
120
130
130
Notes :
1) Values apply to capacitor dielectrics.
2) Values apply to thermal insulating material
3) Values apply to materials with a thickness of less than 0.8 mm
4) Inorganic materials
3) Values apply to materials with a thickness of less than 0.8 mm
4) Inorganic materials
Inorganic materials
Material
Permission temperature
limit (ºC)
limit (ºC)
glass fiber (only alkaline free)
300
lead glass
380
ATTACHMENT
National Differences
Page 106 of 116
Report No.: 11023927 001
National Differences
Clause
Requirement + Test
Result – Remark
Verdict
borosilicate glass
490
quartz glass
800
ceramic
800, (1000) 1)
Note: 1) Value apply to materials used as electric heating elements
Rubber compounds
Material
Rubber compounds
Material
Permission temperature
limit (ºC)
limit (ºC)
natural rubber, polyurethane rubber, ebonite
60
nitrile rubber, styrene butadiene rubber, chloroprene
rubber
rubber
75
butyl rubber
80
ethylene propylene (diene) rubber, chlorosulfonated
polyethylene rubber
polyethylene rubber
90
silicone rubber
180, (200) 1)
Note : 1) Value apply to thermal insulating material and sealing compounds for sheathed heating elements.
Sleeves, Cloth, Tapes and like
Sleeves, Cloth, Tapes and like
Material
Impergnat or coating
Permission temperature limit (ºC)
rayon, cellulose acetate,
vinylon
vinylon
adhesive, oil varnish
105
paper, cotton fabric, silk fabric,
polyamide, polyester fabric,
polyester nonwoven fabric
polyamide, polyester fabric,
polyester nonwoven fabric
oil varnish
105
polyester fabric,
polyester nonwoven fabric
polyester nonwoven fabric
alkyd resin varnish
120
glass fabric
(ditto)
130
paper
Iso or terephtalate
alkyd resin varnish,
epoxy resin varnish,
alkyd resin varnish
alkyd resin varnish,
epoxy resin varnish,
alkyd resin varnish
105
polyester fabric,
polyester nonwoven fabric
polyester nonwoven fabric
(ditto)
120
glass fabric, aramide paper
Iso or terephtalate,
alkyd resin varnish,
epoxy resin varnish
silicone resin varnish,
silicone rubber
alkyd resin varnish,
epoxy resin varnish
silicone resin varnish,
silicone rubber
155
180
180
vulcanised fiber
105
heat resistant fiber
120
ATTACHMENT
National Differences
Page 107 of 116
Report No.: 11023927 001
National Differences
Clause
Requirement + Test
Result – Remark
Verdict
4.7.3.2
Add the following in 7
th
paragraph of this Sub-
Clause.
- for thin materials, e.g., flexible printed boards,
etc., used inside equipment, be of
FLAMMABILITY CLASS VTM-2 or better.
etc., used inside equipment, be of
FLAMMABILITY CLASS VTM-2 or better.
Added.
P
Replace Table 5A of this Sub-Clause by:
Replaced.
P
Table 5A – Maximum current
Type of equipment
Terminal A of
measuring
instrument
instrument
connected to:
Maximum
TOUCH
CURRENT
mA r.m.s.
1)
Maximum
PROTECTIVE
CONDUCTOR
CURRENT
ALL equipment
Accessible parts
and circuits not
connected
to protective earth
and circuits not
connected
to protective earth
0,25
-
HAND-HELD
0,75
-
MOVABLE (other than
HAND-HELD, but
including
TRANSPORTABLE
EQUIPMENT
HAND-HELD, but
including
TRANSPORTABLE
EQUIPMENT
3,5
-
STATIONARY,
PLUGGABLE TYPE A
PLUGGABLE TYPE A
3,5
-
ALL other
STATIONARY
EQUIPMENT
STATIONARY
EQUIPMENT
-
not subject to the
conditions of 5.1.7
conditions of 5.1.7
- subject to the
conditions of 5.1.7
conditions of 5.1.7
Equipment main
protective earthing
terminal
(if any)
CLASS I
EQUIPMENT
3,5
-
-
5 % of input current
HAND-HELD
0,5
-
Others
Equipment main
protective earthing
terminal
protective earthing
terminal
(if any)
CLASS 0I
EQUIPMENT
CLASS 0I
EQUIPMENT
1,0
-
1)
If peak values of TOUCH-CURRENT are measured, the maximum values obtained
by multiplying the r.m.s. values by 1,414.
5.1.6
Table 5A
5.3.8.2
Replace 3rd Item of the Sub-Clause by:
- BASIC INSULATION between the PRIMARY
CIRCUIT and accessible conductive parts of
CLASS I or 0I EQUIPMENT;
CIRCUIT and accessible conductive parts of
CLASS I or 0I EQUIPMENT;
Replaced.
P
Click on the first or last page to see other ON BEAT AIR (serv.man3) service manuals if exist.