Harman Kardon SB 26 (serv.man3) EMC - CB Certificate ▷ View online
Page 14 of 15
Report No.: ACSCBAV13004
ATTACHMENT 2
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
16.1
Add the following paragraph after the third
paragraph.
An external earth wire of Class 0I equipment shall
be green/yellow, and the length of external earth
wire of plug with an external earth wire shall be
equal or more than 10 cm from the plug.
paragraph.
An external earth wire of Class 0I equipment shall
be green/yellow, and the length of external earth
wire of plug with an external earth wire shall be
equal or more than 10 cm from the plug.
N/A
16.2
Replace the first paragraph by the following.
Power supply cord conductors complied with JIS C
3662 (corresponding to IEC 60227) or JIS C 3663
(corresponding to IEC 60245) shall have a nominal
cross-sectional area not less than those shown in
table 18. If power supply cord conductors comply
with other standards, it shall comply with relevant
wiring requirements.
Power supply cord conductors complied with JIS C
3662 (corresponding to IEC 60227) or JIS C 3663
(corresponding to IEC 60245) shall have a nominal
cross-sectional area not less than those shown in
table 18. If power supply cord conductors comply
with other standards, it shall comply with relevant
wiring requirements.
See appended table 14.
Pass
Replace Table 18 by the following.
RATED CURRENT
CONSUMPTION of the
apparatus
a
A
Nominal cross-
sectional area
mm
2
up to and including 6
Over 6 up to and
including 10
Over 10 up to and
including 16
Over 6 up to and
including 10
Over 10 up to and
including 16
0,75
1
1,5
a
The RATED CURRENT CONSUMPTION
includes currents which can be drawn from the
socket-outlets providing MAINS power for other
apparatus.
socket-outlets providing MAINS power for other
apparatus.
16.2
See appended table 14.
Pass
16.3
In item a), replace IEC 60885-1 by JIS C 3661-
1:1998.
1:1998.
N/A
In item b), replace IEC 60227-2 by JIS C 3662-2
(corresponding to IEC 60227-2).
(corresponding to IEC 60227-2).
N/A
16.5
Add “or CLASS 0I EQUIPMENT used a plug with
an external earth wire” after the words, CLASS I
EQUIPMENT.
an external earth wire” after the words, CLASS I
EQUIPMENT.
N/A
20.1
In Note 3, replace each IEC 60065 and IEC 60707
by “JIS C 6065” and “JIS C 0066:2001 (IEC
60707).
by “JIS C 6065” and “JIS C 0066:2001 (IEC
60707).
N/A
Annex B
Replace normative by Informative.
N/A
Annex G
Replace IEC 60707 by JIS C 0066:2001
Replace IEC 60695-2-2 by JIS C 60695-2-2:2000.
Replace IEC 60695-11-10 by JIS Z 2391:1999.
Replace IEC 60695-2-2 by JIS C 60695-2-2:2000.
Replace IEC 60695-11-10 by JIS Z 2391:1999.
Pass
Annex N
Add “- protective earthing lead wire, protective
earthing contact of appliance inlet or external
protective earthing terminal in case of Class 0I
apparatus.” after the second dash of N.1.3.
earthing contact of appliance inlet or external
protective earthing terminal in case of Class 0I
apparatus.” after the second dash of N.1.3.
N/A
Page 15 of 15
Report No.: ACSCBAV13004
ATTACHMENT 2
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Replace the first sentence and two dashes of
N.2.2, as follows:
The continuity of the protective earthing conecction
between
- the ACCESSIBLE conductive parts, including
TERMINALS regarded as ACCESSIBLE (see 8.4),
which should be connected to the PROTECTIVE
EARTHING TERMINAL, and
- the protective earthing contact of socket-outlets
respectively, if provided to deliver power to other
apparatus
should be checked between
- the protective earthing contact of the MAINS plug
or appliance inlet, or the PROTECTIVE
EARTHING TERMINAL in case of a
PERMANENTLY CONNECTED APPARATUS, for
CLASS I apparatus, and
- the protective earthing lead wire, the protective
earthing contact of appliance inlet, or external
protective earthing terminal, for CLASS 0I
apparatus.
N.2.2, as follows:
The continuity of the protective earthing conecction
between
- the ACCESSIBLE conductive parts, including
TERMINALS regarded as ACCESSIBLE (see 8.4),
which should be connected to the PROTECTIVE
EARTHING TERMINAL, and
- the protective earthing contact of socket-outlets
respectively, if provided to deliver power to other
apparatus
should be checked between
- the protective earthing contact of the MAINS plug
or appliance inlet, or the PROTECTIVE
EARTHING TERMINAL in case of a
PERMANENTLY CONNECTED APPARATUS, for
CLASS I apparatus, and
- the protective earthing lead wire, the protective
earthing contact of appliance inlet, or external
protective earthing terminal, for CLASS 0I
apparatus.
N/A
Page 1 of 2
Report No.: ACSCBAV13004
ATTACHMENT 3
Declaration Letter
TRF No. IEC60065K
Enclosure
Declaration Letter
Supplement Id
Description
3-01
Declaration Letter
Page 2 of 2
Report No.: ACSCBAV13004
ATTACHMENT 3
Declaration Letter
TRF No. IEC60065K
Declaration Letter ID 3-01
Click on the first or last page to see other SB 26 (serv.man3) service manuals if exist.