Harman Kardon HK 3770 (serv.man2) EMC - CB Certificate ▷ View online
Page 29 of 51
Report No 248607.
TRF No. IEC60065K
Operating Condition / Status
*), 1khz input signal with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
13 198 50 1.77 206.4
12.0 x 2 ch. (Speaker 1) 18.1 x 2 ch. (Speaker 1)
14 220 50 1.65 206.1
15 240 50 1.51 205.7
16 264 50 1.34 205.7
17 198 60 1.67 205.8
18 220 60 1.55 205.5
19 240 60 1.42 205.1
20 264 60 1.28 205.3
**), 1khz input signal with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
21 198 50 1.56 180.1
12.0 x 2 ch. (Speaker 1) 18.1 x 2 ch. (Speaker 1)
22 220 50 1.46 180.1
23 240 50 1.34 180.4
24 264 50 1.19 180.3
25 198 60 1.49 179.3
26 220 60 1.38 179.8
27 240 60 1.27 179.5
28 264 60 1.14 179.6
**), #), Pink noise signal with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
USB (Version 2.0) terminal (connected 8 ohms x 2 loads at SPEAKER 1 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
29 198 50 1.48 173.2
12.0 x 2 ch. (Speaker 1) 18.1 x 2 ch. (Speaker 1)
30 220 50 1.39 172.7
31 240 50 1.24 172.9
32 264 50 1.19 172.6
33 198 60 1.43 174.7
34 220 60 1.32 173.0
35 240 60 1.21 172.4
36 264 60 1.12 172.6
Measured at, *) HIGH mode **) MID mode of the transformer output, TF93 – see summary of
testing for details)
testing for details)
The values followed #) in table above are measured “A” or “W” values, when replaced the input signal
from 1 kHz sine wave to pink noise.
from 1 kHz sine wave to pink noise.
Page 30 of 51
Report No 248607.
TRF No. IEC60065K
Operating Condition / Status
*), 1khz input signal with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through
USB (Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
USB (Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
37 198 50 2.29 273.3
8.24 x 2 ch. (Speaker 1)
8.24 x 2 ch. (Speaker 2)
8.24 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 1)
8.48 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 2)
38 220 50 2.12 272.8
39 240 50 1.94 272.3
40 264 50 1.73 272.5
41 198 60 2.17 271.9
42 220 60 2.00 271.4
43 240 60 1.84 271.1
44 264 60 1.65 270.9
***), 1khz input signal with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through
USB (Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
USB (Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
45 198 50 1.44 166.2
8.24 x 2 ch. (Speaker 1)
8.24 x 2 ch. (Speaker 2)
8.24 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 1)
8.48 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 2)
46 220 50 1.35 167.2
47 240 50 1.24 167.0
48 264 50 1.11 166.8
49 198 60 1.38 166.8
50 220 60 1.26 165.7
51 240 60 1.16 166.8
52 264 60 1.04 166.5
***), #), Pink noise with 1/8 of maximum non-clipped output mode with loaded 5 V dc/2.1 A through USB
(Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
(Version 2.0) terminal (connected 8 ohms x 4 loads at SPEAKER 1 and 2 terminals);
Cond.
Un (V)
Hz
In (A)
Pn (W)
Uout (V) rms
Pout (W)
53 198 50 1.40 160.3
8.24 x 2 ch. (Speaker 1)
8.24 x 2 ch. (Speaker 2)
8.24 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 1)
8.48 x 2 ch. (Speaker 2)
8.48 x 2 ch. (Speaker 2)
54 220 50 1.30 160.0
55 240 50 1.16 160.9
56 264 50 1.07 158.1
57 198 60 1.35 160.3
58 220 60 1.21 160.1
59 240 60 1.16 161.4
60 264 60 1.01 160.9
Measured at, *) HIGH mode ***) LOW mode of the transformer output, TF93 – see summary of
testing for details)
testing for details)
The values followed #) in table above are measured “A” or “W” values, when replaced the input signal
from 1 kHz sine wave to pink noise.
from 1 kHz sine wave to pink noise.
Page 31 of 51
Report No 248607.
TRF No. IEC60065K
Operating Condition / Status
The input tests were conducted at 1 kHz sine wave input signal with 8 ohm loads for speakers connected
condition, and then replaced the input signal to pink noise for normal heating test and fault condition test
(Other tests in the fault condition tests were performed with 1 kHz sine wave input signal for monitoring
the signal outputs).
The input tests were conducted at 1 kHz sine wave input signal with 8 ohm loads for speakers connected
condition, and then replaced the input signal to pink noise for normal heating test and fault condition test
(Other tests in the fault condition tests were performed with 1 kHz sine wave input signal for monitoring
the signal outputs).
Loudspeaker impedance (Ω) ................................. 8 ohms
—
Several
loudspeaker systems ................................. Right and Left for Speaker 1,
Right and Left for Speaker 2
—
Marking of loudspeaker terminals ........................... SPEAKER 1 (8 Ω)
SPEAKER 2 (8 Ω)
P
Page 32 of 51
Report No 248607.
TRF No. IEC60065K
Temperature Rise dT of Part
dT (K)
Limit max
dT (K) *)
Input Test Condition No.
No. 29
No. 33
No. 32
No. 36
—
AC connector, CN90 body
31.6
31.7
30.4
30.4
-
AC connector, CN91 body
48.1
48.8
41.3
42.3
-
Line filter, LF91 coil
43.3
43.1
36.2
36.8
60 **)
Line filter, LF92 coil
47.8
47.7
39.5
40.7
60 **)
Line filter, LF93 coil
39.0
38.9
33.8
34.5
60 **)
X-capacitor, CX92 body
38.2
38.4
33.1
33.2
65
PWB near DB91
47.1
46.7
41.2
41.4
70
Q901 heat-sink
48.3
47.9
47.3
48.2
-
PWB near Q901
42.3
42.2
41.3
41.1
70
E. Capacitor, C930 body
42.2
41.1
38.1
38.6
105 ºC
PFC inductor, CLZ9Z148Z coil
36.1
35.3
29.2
29.1
60 **)
PFC inductor, CLZ9Z148Z core
32.8
32.3
27.7
28.0
70
Transformer, TF91 coil
44.1
43.2
43.1
43.2
85 **)
Transformer, TF91 core
42.3
41.7
41.6
41.7
95
Transformer, TF92 coil
57.3
57.2
58.1
58.9
85 **)
Transformer, TF92 core
55.6
55.4
57.2
56.9
95
Transformer, TF93 coil
71.2
71.0
73.6
73.9
85 **)
Transformer, TF93 core
59.5
59.4
61.4
61.7
95
PWB near D952
52.1
51.2
53.2
52.8
70
D952 heat-sink
51.3
50.9
52.0
51.9
-
E. Capacitor, C915 body
32.0
31.6
30.8
30.7
85 ºC
PWB near Q502
46.1
46.2
45.3
45.6
70
PWB near Q403
50.1
49.7
48.9
48.9
70
IC1101 body (from Bluetooth board)
29.3
28.9
28.1
28.3
-
PWB near IC1101 (from Bluetooth board)
28.4
28.3
27.9
27.8
70
FAN body
26.3
26.1
25.7
25.5
-
Main heat-sink
51.1
50.7
49.9
50.2
-
Appliance inlet body (non- metallic)
16.1
15.9
14.6
14.5
60
Standby button (non- metallic)
4.6
4.1
4.4
4.1
50
Front cover (non- metallic)
13.8
13.4
13.1
13.3
60
Top cover above main heat-sink (metallic) 28.6
28.3
27.6
27.7
40
Top cover above transformer (metallic)
28.6
28.5
27.7
27.8
40
Ambient
23.2 ºC
23.4 ºC
24.4 ºC
23.5 ºC
-
*) Temperature rise limits for tropical climate is 10 K less.
**) Minus (-) 10 K applied for thermo-couple method for windings.
**) Minus (-) 10 K applied for thermo-couple method for windings.
Click on the first or last page to see other HK 3770 (serv.man2) service manuals if exist.