Harman Kardon GO PLAY MICRO (serv.man4) EMC - CB Certificate ▷ View online
Page 17 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
4 PHYSICAL
REQUIREMENTS
P
4.1 Stability
P
Angle of 10
°
P
Test:
force (N).......................................................: The EUT mass is 0.3 kg
N/A
4.2 Mechanical
strength
P
4.2.1 General
P
4.2.2
Steady force test, 10 N
The EUT is still complying with
relevant requirements of this
standard after 10 N force is
applied to the components
relevant requirements of this
standard after 10 N force is
applied to the components
P
4.2.3
Steady force test, 30 N
No internal enclosure in the
sense of this standard
sense of this standard
N/A
4.2.4
Steady force test, 250 N
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
4.2.5 Impact
test
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
Fall
test
P
Swing
test
P
4.2.6 Drop
test
The EUT is still complying with
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
relevant requirements of this
standard (all the enclosure
materials listed in the table
1.5.1 are tested)
P
4.2.7
Stress relief test
84.8
°C, all the enclosure
materials listed in the table
1.5.1 are tested
1.5.1 are tested
P
4.2.8
Cathode ray tubes
No such device within the EUT
N/A
Picture tube separately certified ......................... : N/A
4.2.9
High pressure lamps
No such device within the EUT
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) .. : The EUT is not such equipment
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
The outer surface of the EUT is
smooth
smooth
P
Page 18 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
4.3.2
Handles and manual controls; force (N)............. : No such device within the EUT
N/A
4.3.3 Adjustable
controls
No such device within the EUT
N/A
4.3.4
Securing of parts
The enclosures are fixed by
ultrasonic welding
ultrasonic welding
P
4.3.5
Connection of plugs and sockets
No such device within the EUT
N/A
4.3.6
Direct plug-in equipment
N/A
Dimensions (mm) of mains plug for direct
plug-in .............................................................. :
plug-in .............................................................. :
N/A
Torque and pull test of mains plug for direct
plug-in; torque (Nm); pull (N).............................. :
plug-in; torque (Nm); pull (N).............................. :
N/A
4.3.7
Heating elements in earthed equipment
No such device within the EUT
N/A
4.3.8 Batteries
No such device within the EUT
N/A
4.3.9
Oil and grease
No such materials within the
EUT
EUT
N/A
4.3.10
Dust, powders, liquids and gases
The EUT does not produce
such things
such things
N/A
4.3.11
Containers for liquids or gases
No such device within the EUT
N/A
4.3.12 Flammable liquids............................................... : No such materials within the
EUT
N/A
Quantity
of
liquid (l)............................................. : N/A
Flash point (
°C)................................................... : N/A
4.3.13 Radiation;
type of radiation ............................... : The EUT does not produce
ionising radiation
N/A
4.3.13.1 General
N/A
4.3.13.2 Ionizing
radiation
N/A
Measured
radiation (pA/kg) ................................:
⎯
Measured
high-voltage (kV) ................................:
⎯
Measured
focus
voltage (kV) ...............................:
⎯
CRT
markings ......................................................:
⎯
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation .. :
N/A
Part, property, retention after test, flammability
classification ..................................................... :
classification ..................................................... :
N/A
4.3.13.5
Laser (including LEDs)
P
Laser
class ........................................................ : Less than 1 mW
⎯
4.3.13.6 Other
types ....................................................... :
N/A
4.4
Protection against hazardous moving parts
N/A
Page 19 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
4.4.1 General
No hazardous moving parts
within the EUT
within the EUT
N/A
4.4.2
Protection in operator access areas
N/A
4.4.3
Protection in restricted access locations
N/A
4.4.4
Protection in service access areas
N/A
4.5 Thermal
requirements
P
4.5.1 Maximum
temperatures
(see appended table 4.5)
P
Normal load condition per Annex L .................... : Operated in the most
unfavourable way of operation
given in the operating
instructions until steady
conditions established
given in the operating
instructions until steady
conditions established
P
4.5.2
Resistance to abnormal heat
(see appended table 4.5.2)
P
4.6
Openings in enclosures
N/A
4.6.1
Top and side openings
N/A
Dimensions (mm) .............................................. : No openign at all
⎯
4.6.2
Bottoms of fire enclosures
N/A
Construction
of the bottom ................................. : No openings at all
⎯
4.6.3
Doors or covers in fire enclosures
No such device within the EUT
N/A
4.6.4
Openings in transportable equipment
No openings at all
N/A
4.6.5
Adhesives for constructional purposes
No barriers or screen provided
to complying with the relevant
requirements of sub-clause
4.6.1, 4.6.2 or 4.6.4
to complying with the relevant
requirements of sub-clause
4.6.1, 4.6.2 or 4.6.4
N/A
Conditioning temperature (
°C)/time (weeks)...... :
⎯
4.7
Resistance to fire
P
4.7.1
Reducing the risk of ignition and spread of flame
P
Method 1, selection and application of
components wiring and materials
components wiring and materials
(see appended table 4.7)
P
Method 2, application of all of simulated fault
condition tests
condition tests
N/A
4.7.2
Conditions for a fire enclosure
Fire enclosure is provided
P
4.7.2.1
Parts requiring a fire enclosure
P
4.7.2.2
Parts not requiring a fire enclosure
N/A
4.7.3 Materials
4.7.3.1 General
P
4.7.3.2
Materials for fire enclosures
(see appended table 1.5.1)
P
Page 20 of 70
Report No.: JGZ0512196-3
IEC 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
TRF
No.:IEC60950_1A
Intertek Testing Services Shenzhen Ltd. Guangzhou GDD Branch
3/F., Hengyun Building, 728 Kaifa Ave., Guangzhou Economic & Technological Development District, Guangzhou, China
Tel: (86 20) 8396 6868 Fax: (86 20) 8222 8170 Website: www.china.intertek-etlsemko.com
4.7.3.3
Materials for components and other parts outside
fire enclosures
fire enclosures
N/A
4.7.3.4
Materials for components and other parts inside
fire enclosures
fire enclosures
(see appended table 1.5.1)
P
4.7.3.5
Materials for air filter assemblies
No such device within the EUT
N/A
4.7.3.6
Materials used in high-voltage components
No such device within the EUT
N/A
Click on the first or last page to see other GO PLAY MICRO (serv.man4) service manuals if exist.