Harman Kardon GO AND PLAY (serv.man4) EMC - CB Certificate ▷ View online
- Page 20 of 58 -
www.nemko.com
Report No. 70512
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.1.4
Insulation of conductors
Class III equipment.
N/A
3.1.5
Beads and ceramic insulators
No beads or similar ceramic
insulators on conductors.
insulators on conductors.
N/A
3.1.6
Screws for electrical contact pressure
No screws used for electrical
contact.
contact.
N/A
3.1.7
Insulating materials in electrical connections
No contact pressure through
insulating material.
insulating material.
N/A
3.1.8
Self-tapping and spaced thread screws
Thread-cutting or space thread
screws are not used for
electrical connections.
screws are not used for
electrical connections.
N/A
3.1.9
Termination of conductors
Class III equipment.
N/A
10 N pull test
N/A
3.1.10
Sleeving on wiring
Sleeving not used as
supplementary insulation.
supplementary insulation.
N/A
3.2
Connection to an a.c. mains supply or a d.c. mains supply
N/A
3.2.1
Means of connection ..........................................: Class III equipment. Unit is not
intended for direct connection
to a mains supply.
to a mains supply.
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2
Multiple supply connections
N/A
3.2.3 Permanently
connected
equipment
N/A
Number of conductors, diameter (mm) of cable
and conduits .......................................................:
and conduits .......................................................:
—
3.2.4 Appliance
inlets
N/A
3.2.5
Power supply cords
N/A
3.2.5.1
AC power supply cords
N/A
Type ....................................................................:
—
Rated current (A), cross-sectional area (mm
2
),
AWG....................................................................:
—
3.2.5.2 DC
power
supply
cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) .......................:
—
Longitudinal
displacement
(mm)
........................:
—
3.2.7
Protection against mechanical damage
N/A
3.2.8 Cord
guards
N/A
- Page 21 of 58 -
www.nemko.com
Report No. 70512
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
D (mm); test mass (g) ........................................:
—
Radius of curvature of cord (mm) .......................:
—
3.2.9
Supply wiring space
N/A
3.3
Wiring terminals for connection of external conductors
N/A
3.3.1 Wiring
terminals
None.
N/A
3.3.2
Connection of non-detachable power supply
cords
cords
N/A
3.3.3 Screw
terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Rated current (A), cord/cable type, cross-
sectional area (mm
sectional area (mm
2
) ...........................................:
—
3.3.5 Wiring
terminal
sizes
N/A
Rated current (A), type and nominal thread
diameter (mm) ....................................................:
diameter (mm) ....................................................:
—
3.3.6 Wiring
terminal
design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8 Stranded
wire
N/A
3.4
Disconnection from the mains supply
N/A
3.4.1
General requirement
Class III equipment. Unit is not
intended for direct connection
to a mains supply.
intended for direct connection
to a mains supply.
N/A
3.4.2 Disconnect
devices
N/A
3.4.3 Permanently
connected
equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5
Switches in flexible cords
N/A
3.4.6
Single-phase equipment and d.c. equipment
N/A
3.4.7 Three-phase
equipment
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10 Interconnected
equipment
N/A
3.4.11 Multiple
power
sources
N/A
3.5
Interconnection of equipment
P
- Page 22 of 58 -
www.nemko.com
Report No. 70512
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.5.1 General
requirements
Considered.
P
3.5.2
Types of interconnection circuits.......................... : SELV circuit.
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnections.
N/A
4 PHYSICAL
REQUIREMENTS
P
4.1 Stability
P
Angle of 10
°
Unit does not overbalance at
10°.
10°.
P
Test: force (N) ...................................................... : The unit is not floor standing.
N/A
4.2 Mechanical
strength
P
4.2.1 General
P
4.2.2
Steady force test, 10 N
Class III equipment, functional
insulation, SELV only, no
hazardous energy levels in
equipment.
insulation, SELV only, no
hazardous energy levels in
equipment.
N/A
4.2.3
Steady force test, 30 N
P
4.2.4
Steady force test, 250 N
P
4.2.5 Impact
test
N/A
Fall
test
N/A
Swing
test
N/A
4.2.6 Drop
test
N/A
4.2.7 Stress
relief
test
N/A
4.2.8
Cathode ray tubes
No cathode ray tubes.
N/A
Picture tube separately certified..........................:
N/A
4.2.9 High
pressure
lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) ....: Not intended for wall or ceiling
mounting.
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
Edges and corners are
smoothed, no sharp edges.
smoothed, no sharp edges.
P
4.3.2
Handles and manual controls; force (N) ............ : No knobs, grips, handles,
levers etc.
N/A
4.3.3
Adjustable controls
No hazardous adjustable
controls.
controls.
N/A
- Page 23 of 58 -
www.nemko.com
Report No. 70512
TRF No.:IECEN60950_1B
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
4.3.4
Securing of parts
No hazards associated with
loosening parts.
loosening parts.
N/A
4.3.5
Connection of plugs and sockets
SELV connectors do not
comply with IEC 60320 or IEC
60083.
comply with IEC 60320 or IEC
60083.
N/A
4.3.6
Direct plug-in equipment
Not intended to plug directly
into a wall socket-outlet.
into a wall socket-outlet.
N/A
Dimensions (mm) of mains plug for direct plug-in
.............................................................................:
.............................................................................:
N/A
Torque and pull test of mains plug for direct
plug-in; torque (Nm); pull (N)...............................:
plug-in; torque (Nm); pull (N)...............................:
N/A
4.3.7
Heating elements in earthed equipment
No heating elements provided.
N/A
4.3.8
Batteries
Normal D-cell batteries to be
used in the equipment.
(See summary of testing).
used in the equipment.
(See summary of testing).
P
4.3.9
Oil and grease
Insulation is not exposed to oil,
grease etc.
grease etc.
N/A
4.3.10
Dust, powders, liquids and gases
The equipment does not
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases.
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases.
N/A
4.3.11
Containers for liquids or gases
No containers for liquids or
gases in the equipment.
gases in the equipment.
N/A
4.3.12
Flammable liquids .............................................. : The equipment does not
contain flammable liquid.
N/A
Quantity of liquid (l) ............................................ :
N/A
Flash point (
°C) .................................................. :
N/A
4.3.13
Radiation; type of radiation ............................... : The equipment does not
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases. LED is diffused type.
use a laser, and does not
contain flammable liquids or
gases. LED is diffused type.
N/A
4.3.13.1 General
N/A
4.3.13.2 Ionizing
radiation
N/A
Measured
radiation
(pA/kg)
................................. :
—
Measured
high-voltage
(kV)
................................ :
—
Measured focus voltage (kV) .............................. :
—
CRT
markings
..................................................... :
—
Click on the first or last page to see other GO AND PLAY (serv.man4) service manuals if exist.