Harman Kardon ESQUIRE EMC - CB Certificate ▷ View online
Page 20 of 84 Report No. EFSN13070410E-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10
Interconnected equipment
N/A
3.4.11
Multiple power sources
N/A
3.5
Interconnection of equipment
P
3.5.1
General requirements
Considered.
P
3.5.2
Types of interconnection circuits ........................... : Interconnection circuits are
SELV circuits
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnection
circuits
circuits
N/A
3.5.4
Data ports for additional equipment
No data ports.
N/A
4
PHYSICAL REQUIREMENTS
P
4.1
Stability
N/A
Angle of 10
N/A
Test force (N) ........................................................ :
N/A
4.2
Mechanical strength
Class III device, no hazardous voltage/energy inside
N/A
4.2.1
General
N/A
Rack-mounted equipment.
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5
Impact test
N/A
Fall test
N/A
Swing test
N/A
4.2.6
Drop test; height (mm) .......................................... :
N/A
4.2.7
Stress relief test
N/A
4.2.8
Cathode ray tubes
N/A
Picture tube separately certified ............................ :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) ....... :
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
All edges and corners are
rounded and/or smoothed.
rounded and/or smoothed.
P
Page 21 of 84 Report No. EFSN13070410E-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
4.3.2
Handles and manual controls; force (N) ............. :
N/A
4.3.3
Adjustable controls
No hazardous adjustable
controls.
controls.
N/A
4.3.4
Securing of parts
Electrical and mechanical
connections can be expected
to withstand usual mechanical
stress.
connections can be expected
to withstand usual mechanical
stress.
P
4.3.5
Connection by plugs and sockets
P
4.3.6
Direct plug-in equipment
Not intended to plug directly
into a wall socket-outlet.
into a wall socket-outlet.
N/A
Torque .................................................................. :
Compliance with the relevant mains plug standard
.............................................................................. :
.............................................................................. :
N/A
4.3.7
Heating elements in earthed equipment
No heating elements
provided.
provided.
N/A
4.3.8
Batteries
P
- Overcharging of a rechargeable battery
P
- Unintentional charging of a non-rechargeable
battery
battery
N/A
- Reverse charging of a rechargeable battery
According to the
configuration, battery can't be
reversed charging
configuration, battery can't be
reversed charging
N/A
- Excessive discharging rate for any battery
P
4.3.9
Oil and grease
Insulation in intended use not
considered to be exposed to
oil or grease.
considered to be exposed to
oil or grease.
N/A
4.3.10
Dust, powders, liquids and gases
The equipment does not
produce dust or use powders,
liquids and gases in the
equipment.
produce dust or use powders,
liquids and gases in the
equipment.
N/A
4.3.11
Containers for liquids or gases
No container for liquids or
gases used
gases used
N/A
4.3.12
Flammable liquids ................................................ :
The equipment does not
contain flammable liquid
contain flammable liquid
N/A
Quantity of liquid (l) .............................................. :
N/A
Flash point (
C) .................................................... :
N/A
4.3.13
Radiation
Refer below:
P
4.3.13.1
General
Refer below:
P
4.3.13.2
Ionizing radiation
The equipment does not
generate ionizing radiation.
generate ionizing radiation.
N/A
Measured radiation (pA/kg) .................................. :
Measured high-voltage (kV) ................................. :
Measured focus voltage (kV) ............................... :
Page 22 of 84 Report No. EFSN13070410E-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
CRT markings ...................................................... :
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
The equipment does not
produce significant UV
radiation.
produce significant UV
radiation.
N/A
Part, property, retention after test, flammability
classification ......................................................... :
classification ......................................................... :
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation ...... :
The equipment does not
produce significant UV
radiation.
produce significant UV
radiation.
N/A
4.3.13.5
Lasers (including laser diodes) and LEDs
P
4.3.13.5.1
Lasers (including laser diodes)
N/A
Laser class ........................................................... :
4.3.13.5.2
Light emitting diodes (LEDs)
LED indicating lights
P
4.3.13.6
Other types ........................................................... :
The equipment does not
generate other types of
radiation.
generate other types of
radiation.
N/A
4.4
Protection against hazardous moving parts
N/A
4.4.1
General
No hazardous moving parts
within the equipment
within the equipment
N/A
4.4.2
Protection in operator access areas .................... :
N/A
Household and home/office document/media
shredders
shredders
N/A
4.4.3
Protection in restricted access locations .............. :
N/A
4.4.4
Protection in service access areas
N/A
4.4.5
Protection against moving fan blades
N/A
4.4.5.1
General
N/A
Not considered
to cause pain or injury. a)……….:
N/A
Is considered to
cause pain, not injury. b) ………:
N/A
Considered to cause injury.
c) ………:
N/A
4.4.5.2
Protection for users
N/A
Use
of symbol or warning …………………………:
N/A
4.4.5.3
Protection for service persons
N/A
Use
of symbol or warning …………………………:
N/A
4.5
Thermal requirements
P
4.5.1
General
See appended table 4.5.1
P
4.5.2
Temperature tests
(see appended table 4.5)
P
Normal load condition per Annex L ...................... :
Page 23 of 84 Report No. EFSN13070410E-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1C
4.5.3
Temperature limits for materials
(see appended table 4.5)
P
4.5.4
Touch temperature limits
(see appended table 4.5)
P
4.5.5
Resistance to abnormal heat ............................... :
N/A
4.6
Openings in enclosures
P
4.6.1
Top and side openings
No any opening
P
Dimensions (mm) ................................................. :
4.6.2
Bottoms of fire enclosures
No any opening
P
Construction of the bottomm, dimensions (mm) .. :
4.6.3
Doors or covers in fire enclosures
No doors or covers.
N/A
4.6.4
Openings in transportable equipment
Not transportable equipment.
N/A
4.6.4.1
Constructional design measures
N/A
Dimensions (mm) ................................................. :
4.6.4.2
Evaluation measures for larger openings
N/A
4.6.4.3
Use of metallized parts
N/A
4.6.5
Adhesives for constructional purposes
No barrier secured by
adhesive inside enclosure.
adhesive inside enclosure.
N/A
Conditioning temperature (
C), time (weeks) ........ :
4.7
Resistance to fire
P
4.7.1
Reducing the risk of ignition and spread of flame
Fire enclosure is not required
due to Class III unit intended
to be supplied by lithium or
approved adapter, lithium and
adapter output comply with
L.P.S
due to Class III unit intended
to be supplied by lithium or
approved adapter, lithium and
adapter output comply with
L.P.S
P
Method 1, selection and application of components
wiring and materials
wiring and materials
N/A
Method 2, application of all of simulated fault
condition tests
condition tests
N/A
4.7.2
Conditions for a fire enclosure
P
4.7.2.1
Parts requiring a fire enclosure
N/A
4.7.2.2
Parts not requiring a fire enclosure
Fire enclosure is not required
due to Class III unit intended
to be supplied by L.P.S, and
all components mounted on
V-0 PCB
due to Class III unit intended
to be supplied by L.P.S, and
all components mounted on
V-0 PCB
P
4.7.3
Materials
P
Click on the first or last page to see other ESQUIRE service manuals if exist.