Sony SLV-ED212KR / SLV-ED717KR / SLV-ED818TW / SLV-ED919KR / SLV-ED919TW / SLV-LF1KR Service Manual ▷ View online
53
Additional Operations
Operation
(when recording on this VCR)
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• (SLV-ED919KR/ED717KR)
Press INPUT SELECT or CH +/– to
display “L1” or “L2” in the display
window.
display “L1” or “L2” in the display
window.
• (SLV-ED212KR)
Press INPUT SELECT or CH +/– to
display “L” in the display window.
display “L” in the display window.
• Press REC SPEED to select the tape
speed.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X PAUSE.
Search for the point to start recording and press X PAUSE.
3
Press z REC and set it to recording pause.
4
To start editing, press the X PAUSE buttons on both VCRs at the same
time.
time.
To stop editing
Press the x STOP buttons on both VCRs.
Tips
• To edit more precisely, press the X PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press X PAUSE on this VCR when an
• To edit more precisely, press the X PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press X PAUSE on this VCR when an
unwanted scene begins. When it ends, press X PAUSE again to resume recording.
Note
• If you start recording following the procedure above, the VCR won’t start recording
• If you start recording following the procedure above, the VCR won’t start recording
with the APC function. To record a tape with the APC function, press z REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press X PAUSE immediately after the APC indicator stops
flashing. If you press X PAUSE before the APC indicator stops flashing, the APC
function is canceled.
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press X PAUSE immediately after the APC indicator stops
flashing. If you press X PAUSE before the APC indicator stops flashing, the APC
function is canceled.
z
REC
X
PAUSE
Additional Information
54
Additional Information
General setup information
Attaching the external
antenna connector
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use an antenna
connector (not supplied) to connect the
antenna to the VCR.
for VHF/UHF antenna, use an antenna
connector (not supplied) to connect the
antenna to the VCR.
1
Loosen the screws on the antenna connector.
2
Wind the twin leads around the screws on the antenna connector.
3
Retighten the screws.
Attaching a UHF/VHF band
mixer
mixer
When using both 75-ohm coaxial cable
and 300-ohm twin lead cable for VHF/
UHF antenna, use a UHF/VHF band
separator/mixer (not supplied) to
connect the antenna to the VCR.
and 300-ohm twin lead cable for VHF/
UHF antenna, use a UHF/VHF band
separator/mixer (not supplied) to
connect the antenna to the VCR.
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
300-ohm twin
lead cable
lead cable
UHF/VHF
band
separator/
mixer (not
supplied)
band
separator/
mixer (not
supplied)
300-ohm twin
lead cable
lead cable
75-ohm coaxial
cable
cable
Antenna
connector (not
supplied)
connector (not
supplied)
59
Additional Information
Index to parts and controls
Front panel
Refer to the pages indicated in parentheses ( ) for details.
1 ?/1 POWER switch (36)
2 Tape compartment
3 A EJECT button (23)
4 m REW (rewind) button (23, 43)
5 H PLAY button (23)
6 M FF (fast-forward) button
(23, 43)
7 z REC (record) button (25)
8 x STOP button (23)
9 X PAUSE button (23)
0 SEARCH MODE indicator (37, 38,
39, 41, 42)
qa EASY TIMER knob (27, 37, 38, 39,
41, 42)
qs CHANNEL/TRACKING +/–
buttons (25, 49)
qd Remote sensor (5)
qf REC SPEED SP (Standard Play)/EP
(Extended Play) button (28)
qg INPUT SELECT button (26)
qh ONE TOUCH TUNING button (13)
qj R
2
(Reality Regenerator) button
(SLV-ED919KR and ED717KR only)
(49)
(49)
qk LINE-2 IN VIDEO/AUDIO L/R
jacks (SLV-ED919KR and ED717KR
only) (52)
only) (52)
continued
!¶ !§
8
!¢
!∞
!º
1
3 4 5
2
6
7
9
!¡
!™
!£
!•
Additional Information
60
Index to parts and controls (continued)
Rear panel (SLV-ED919KR)
1 AC power cord
2 LINE-1 IN AUDIO R/L/VIDEO
jacks (7)
3 VHF/UHF IN connector (9)
4 VHF/UHF OUT connector (9)
5 RF (Radio Frequency) UNIT switch
(10)
6 LINE OUT AUDIO R/L/VIDEO
jacks (7)
1 AC power cord
2 LINE-1 IN AUDIO/VIDEO jacks
(52)
3 VHF/UHF IN connector (9)
4 VHF/UHF OUT connector (9)
5 RF (Radio Frequency) UNIT switch
(10)
6 LINE OUT AUDIO/VIDEO jacks
(8)
Rear panel (SLV-ED717KR and ED212KR)
2
1
3
6
54
2
1
3
54
6
1-13
61
Additional Information
Display window
8 APC (Adaptive Picture Control)
indicator (50)
9 STOP indicator (28)
q; Tracking indicator (49)
qa Time counter/channel/clock/line
indicator (23, 25, 29, 53)
qs Tape/recording indicator (25)
1 Timer indicator (28)
2 STEREO indicator (47)
(SLV-ED919KR only)
3 Tape speed indicator (25)
4 VIDEO indicator (10, 26)
5 CLOCK indicator (29)
6 AM/PM indicator (28)
7 START indicator (27)
continued
STEREO
SAP
SP
LP
EP
LP
EP
CLOCK
VIDEO
START STOP
APC
AMPM
Additional Information
62
Remote commander
1
2
3
4
5
6
7
8
9
0
Index to parts and controls (continued)
1
TV/VIDEO
remote control switch
(5)
2 Z EJECT button (23)
3 TV/VIDEO button (for TV) (5)
4 INPUT SELECT button (26, 36)
5 CLEAR button (23, 34)
6 EASY TIMER button (27)
7 R
2
(Reality Regenerator) button (49)
(SLV-ED919KR and ED717KR only)
8 z REC button (25, 44)
9 REC SPEED button (25)
0
×2 button (43)
qa MENU button (11, 51)
qs Tape/menu operation buttons
X
PAUSE/
M button (23)
x
STOP/
m button (23)
m
REW (rewind)/
< button
(23, 43)
M
FF (fast-forward)/
, button
(23, 43)
H
PLAY/OK button (23)
qd ?/1 (power) switch (36)
qf AUDIO MONITOR button (47)
(SLV-ED919KR only)
qg G-CODE button (33)
(SLV-ED919KR only)
qh Number buttons and ENTER (AM/
PM) button (17, 28)
qj CH (channel) +/– buttons (25)
qk VOL (volume) +/– buttons (for TV)
ql DISPLAY button (26)
w; ./> INDEX SEARCH buttons
(40)
wa y SLOW button (43)
1-14E
SECTION 2
DISASSEMBLY
NOTE: Follow the disassembly procedure in the numerical order given.
9
Earth Plate
1
Five screws
(B2.6
× 8)
2
DM-98 board
3
Flat Cable FDM-010
4
DI-81 board
6
FJ-31 board
7
Flat Cable FDI-002
Two screws
(B2.6
(B2.6
× 8)
0
Two screws
(B2.6
(B2.6
× 8)
8
5
Flat Cable FDI-002
2-2. DM-98 BOARD, DI-81 BOARD, FJ-31 BOARD
SLV-ED212/ED717/ED818/ED919/LF1
2-1. CASE, FRONT PANEL BLOCK ASSEMBLY
1
Two tapping screws
3
Upper case
2
Two tapping screws
5
Flat Cable FDM-010
6
Flat Cable FDI-002
4
Flat Cable FDI-002
7
Front panel
(Engaged by the six hooks)
Hooks
Hooks
Hooks
Hooks
2-1
2
MA-402 board with
mechanism deck
1
Six screws
(Sumitite (B3) +BV)
Hooks
Hooks
Hooks
Hooks
2
Rear panel
(Engaged by the seven hooks)
1
POWER code stopper
2-4. MA-402 BOARD
2-3. REAR PANEL
2-2
Click on the first or last page to see other SLV-ED212KR / SLV-ED717KR / SLV-ED818TW / SLV-ED919KR / SLV-ED919TW / SLV-LF1KR service manuals if exist.