Sony XBR-52LX905 / XBR-60LX905 (serv.man3) Service Manual ▷ View online
XBR-52LX905/60LX905
12
Components not identifi ed by a part number or
description are not stocked because they are seldom
required for routine service.
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
some delay when ordering these components.
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Remove 4 screws from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
C Gently place the TV set face down onto a soft cloth
1
A-1782-307-A
BASE (LL1) ASSEMBLY
(XBR-52LX905 ONLY)
1
A-1782-308-A
BASE(LLL1) ASSEMBLY
(XBR-60LX905 ONLY)
2
4-170-475-01
COVER, NECK (LL1 FRONT)
(XBR-52LX905 ONLY)
2
4-170-476-01
COVER, NECK (LLL3A FRONT)
(XBR-60LX905 ONLY)
3
4-170-482-01
COVER, NECK (LL1 REAR)
(XBR-52LX905 ONLY)
3
4-170-488-01
COVER, NECK (LLL3A REAR)
(XBR-60LX905 ONLY)
4
A-1782-575-A NECK(LL1)ASSEMBLY
(XBR-52LX905 ONLY)
4
4-170-452-01
NECK (LLL3A)
(XBR-60LX905 ONLY)
5
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01
SCREW, +PSW M5X16
B
A
Soft Cloth
C
1
2
4
5
3
XBR-52LX905/60LX905
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-2. REAR COVER, UNDER COVER, VESA BRACKETS, AC INLET, SWITCH UNIT REMOVAL
1-2-1. XBR-52LX905 ONLY
A Remove 8 screws from Rear Cover
B Lift up Blind Touch Key (BTK) Cover to remove from Rear Cover
B Lift up Blind Touch Key (BTK) Cover to remove from Rear Cover
C Lift up Bottom Cover to remove from Rear Cover
D Remove 4 screws from Rear Cover
D Remove 4 screws from Rear Cover
E Lift up Terminal Cover to remove from Rear Cover
F Remove 1 screw from Terminal position
G Remove 1 screw from Side Jack position
H Remove 2 screws from Under Cover to detach from
Bottom Frame
I Disconnect AC Inlet from GE4B (Power) Board
and detach from Under Cover
J Remove 2 screws from Vesa Brackets
to detach from LCD Panel
K Lift up Switch Unit and
disconnect 1 connector to
remove from LCD Panel
L Slide out Power Switch and
disconnect 1 connector to
remove from Switch Unit
NOTE: The Vesa Brackets are
not included with the LCD
Panel and must be reattached
to the replacement LCD Panel
57
4-164-305-01
BRACKET, VESA T (ML)
58
1-489-135-21
SWITCH UNIT
59
1-798-309-11
POWER SWITCH
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
4-178-167-01
SCREW, ORNAMENTAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
51
4-165-759-02
REAR COVER (52)
52
4-165-967-02
COVER, BLIND TOUCH KEY
53
4-165-764-01
COVER, BOTTOM (52)
54
4-185-199-01
COVER, TERMINAL
55
4-170-442-11
COVER, UNDER (PIA)
! 56
1-842-031-11
AC INLET (2P)
A
C
B
E
F
D
G
H
I
K
L
J
51
53
52
54
55
56
58
59
57
XBR-52LX905/60LX905
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
4-178-167-01
SCREW, ORNAMENTAL
1-2-2. XBR-60LX905 ONLY
A Remove 8 screws from Rear Cover Assembly
B Lift up Blind Touch Key Cover to remove from Rear Cover
B Lift up Blind Touch Key Cover to remove from Rear Cover
C Lift up Bottom Cover to remove from Rear Cover Assembly
D Remove 4 screws from Rear Cover Assembly
D Remove 4 screws from Rear Cover Assembly
E Lift up Terminal Cover to remove from Rear Cover Assembly
F Remove 1 screw from Terminal position
G Remove 1 screw from Side Jack position
H Remove 2 screws from Rear Cover Top
I Remove 1 screw from Under Cover to detach from
Bottom Frame
J Remove 1 screw from AC Inlet to detach from
Bottom Frame
K Disconnect AC Inlet from GE4A (Power) Board
and detach from Under Cover
L Remove 2 screws from
Vesa Brackets to detach
from LCD Panel
M Lift up Switch Unit and
disconnect 1 connector to
remove from LCD Panel
N Slide out Power Switch and
disconnect 1 connector to
remove from Switch Unit
NOTE: The Vesa Brackets
are not included with the
LCD Panel and must be
reattached to the replacement
LCD Panel
A
B
I
K
M
N
L
C
E
H
F
D
G
J
101
106
107
109
110
108
102
103
105
104
101
4-165-967-02
COVER, BLIND TOUCH KEY
102
4-165-765-01
COVER, BOTTOM (60)
103
4-185-199-01
COVER, TERMINAL
104
4-165-761-02
REAR COVER (60 BTM)
105
4-165-760-01
REAR COVER (60 TOP)
106
4-168-432-21
COVER, UNDER (60))
! 107
1-842-104-31
AC INLET
108
4-164-305-01
BRACKET, VESA T (ML)
109
1-489-135-21
SWITCH UNIT
110
1-798-309-11
POWER SWITCH
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
XBR-52LX905/60LX905
15
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
151
A-1782-612-A
HEM BOARD, MOUNTED
152
4-184-303-02
BRACKET, SP (PIA)
153
1-858-380-21
SP BOX ASSEMBLY (RIGHT)
154
1-487-843-11
CAMERA MODULE
155
4-184-779-01
ORNAMENT, CAMERA
156
1-858-380-11
SP BOX ASSEMBLY (LEFT)
157
A-1782-611-A
HLR BOARD, MOUNTED
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
1-3. SPEAKER BOX ASSEMBLY, HEM BOARD, CAMERA MODULE AND HLR BOARD REMOVAL
A Lift up right-side Speaker Box Assembly to remove from Speaker Bracket
B Lift up right-side Speaker Bracket to remove from Bottom Horizontal Frame
B Lift up right-side Speaker Bracket to remove from Bottom Horizontal Frame
C Disconnect 1 connector from HEM Board, then release clips and lift up to remove from
Bottom Cabinet Right
D Remove screws from Bottom Frame to detach from LCD Panel
5 from XBR-52LX905 Only
6 from XBR-60LX905 Only
E Remove 1 screw from Camera Bracket to detach from Bottom Cabinet Center
F Disconnect 1 connector from Camera Module, then release clips and lift up to remove from
Bottom Cabinet Center
G Lift up Camera Ornament to remove from Bottom Cabinet Center
H Lift up left-side Speaker Box Assembly to remove from Speaker Bracket
I Lift up left-side Speaker Bracket to remove from Bottom Horizontal Frame
J Disconnect 1 connector from HLR Board, then release clips and lift up to remove from
Bottom Cabinet Left
K Remove 2 screws from LVDS Holder to detach from LCD Panel
D
F
A
H
B
C
I
J
K
E
G
154
153
156
152
151
152
157
155
Click on the first or last page to see other XBR-52LX905 / XBR-60LX905 (serv.man3) service manuals if exist.