Sony XBR-52LX905 / XBR-60LX905 (serv.man3) Service Manual ▷ View online
XBR-52LX905/60LX905
24
SERVICE ADJUSTMENTS
2-2-2. SELECTING THE MODEL
After replacing the BUHS Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010 W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
---.---------
4. Press
2
to move to the 002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
01 : 1a
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis Model Name
䎧䏄䏗䏄䎃
䎹䏄䏏䏘䏈
䎦䏒䏇䏈䎃
䎱䏄䏐䏈
AZ1-H
XBR-52LX905
01
1a
AZ1-H
XBR-60LX905
01
1a
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
01: 1a
Data Value
Code Name
6. Proceed to “Selecting the Destination”.
XBR-52LX905/60LX905
25
SERVICE ADJUSTMENTS
2-2-3. SETTING THE DESTINATION
After replacing the BUHS Board or the LCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
BUHS Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
01: 1a
7. Press
1
to move to “001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROU
P
DESTINATION
CODE
DATA
VALUE
DESTINATION
BR
13
BRAZIL
AR
20
ARGENTINA
BR grp
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
13: BR (BR grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BUHS Board replacement.
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
XBR-52LX905/60LX905
26
SERVICE ADJUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
IDB61736AC
PID360A0000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
LK520D3LB2N
Model ID
Product ID
Panel
Code
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name Model ID
Product ID
Panel ID
Code
Name
XBR-52LX905
B61736AC
360A0000
LK520D3LB2N
1a
XBR-60LX905
B61736AD
360A0000
LK600D3LA6N
1a
5. Exit Service Mode by pressing HOME or turn the
TV power off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: If the Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3. Press
2
to move to “006 WB” Category.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
4. Press
0
to enter White Balance Adjustment mode.
XBR-52LX905/60LX905
27
SERVICE ADJUSTMENTS
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
a. To select R_DRV, press
1
.
b. To select G_DRV, press
2
.
c. To select B_DRV, press
3
.
d. To select R_BKG, press
4
.
e To select G_BKG, press
5
.
f. To select B_BKG, press
6
.
6. After selecting the White Balance setting, press ENT to
display the edit screen.
The screen displays a “Please input WB items” message.
DIGITAL
SERVICE
WB
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 - 255)
---
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
7. Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting (value must be between
1 and 255).
8. Press ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press JUMP or OPTIONS
2-4. CHANGING THE EMITTER OUTPUT LEVEL
Note: To reduce the emitter LED output power strength.
Change Date of “SUB” service mode.
a. To select 001 TD, press
2
then
5
on the remote.
b. To select 000 EMIT_STR, press
1
then
4
on the remote.
c. To change data from “0” to “1” press
3
then
6
on the
remote.
0: Strong (Default)
1: Weak
d. Save and reboot.
SUB
SERVICE
001
000
000
EMIT_STR 1
TD
Click on the first or last page to see other XBR-52LX905 / XBR-60LX905 (serv.man3) service manuals if exist.