Sony XBR-52LX905 / XBR-60LX905 (serv.man3) Service Manual ▷ View online
XBR-52LX905/60LX905
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
201
1-474-221-11
GE4B (POWER) BOARD, COMPLETE
(XBR-52LX905 ONLY)
201
1-474-220-11
GE4A (POWER) BOARD, COMPLETE
(XBR-60LX905 ONLY)
202
4-172-021-01
BRACKET, TERMINAL T
203
A-1782-496-A
BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BUHS Board or LCD Panel.
NOTE: Final software is not installed on this BUHS Board.
Install the update after replacing this board using the instructions
provided with the software.
204
A-1768-718-A
BRACKET, SIDE JACK T ASSEMBLY
205
1-754-692-21
ANTENNA
206
1-754-692-11
ANTENNA
207
1-487-819-11
CARD, WIRELESS LAN
*
2-345-219-11
+B IB 3X-- CM3
2-580-592-01
SCREW, +PSW M3X8
2-580-590-01
SCREW, +PSW M3X5
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-4. GE4B/GE4A (POWER) BOARDS, BUHS BOARD, WIFI ANTENNAS AND
WIRELESS LAN CARD REMOVAL
A Remove screws from GE4B/GE4A (Power) Boards
5 from GE4B/GE4A (Power) Boards
B Disconnect 6 connectors from GE4B/GE4A (Power) Boards
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Disconnect 5 connectors from BUHS Board
D Disconnect 5 connectors from BUHS Board
E Remove 9 screws from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Remove 3 screws from B Frame Left to detach from LCD Panel
H Remove 5 screws from B Frame Right to detach from LCD Panel
I Remove 1 screw from Antenna to detach from Bottom Horizontal Frame
J Remove 1 screw from Antenna to detach from Vertical Frame Left
K Remove 2 screws from WIFI Card to detach from LCD Panel
J
A
K
B
C
D
E
F
I
G
H
206
207
201
202
203
204
205
XBR-52LX905/60LX905
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
251
NA
LCD PANEL (P-MOD)
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
252
4-186-944-01
FRAME, HT (52PIA2)
(XBR-52LX905 ONLY)
252
4-186-948-01
FRAME, HT (60PIA2)
(XBR-60LX905 ONLY)
253
4-186-943-01
FRAME, VL (52PIA2)
(XBR-52LX905 ONLY)
253
4-186-947-01
FRAME, VL (60PIA2)
(XBR-60LX905 ONLY)
254
4-174-329-01
JOINT, CORNER
255
4-186-945-02
FRAME, HB (52 PIA2)
(XBR-52LX905 ONLY)
255
4-186-949-01
FRAME, HB (60 PIA2)
(XBR-60LX905 ONLY)
256
A-1782-329-A
CABINET, BTM (PIA L) ASSEMBLY
257
A-1782-330-A
CABINET,BTM (PIA C) ASSEMBLY
258
A-1782-328-A
CABINET, BTM (PIA R) ASSEMBLY
259
4-186-942-01
FRAME, VR (52PIA2)
(XBR-52LX905 ONLY)
259
4-186-946-01
FRAME, VR (60PIA2)
(XBR-60LX905 ONLY)
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
1-5. HORIZONTAL FRAMES, VERTICAL FRAMES, CORNER JOINTS AND
BOTTOM CABINET ASSEMBLY REMOVAL
A Remove 8 screws from Corner Joints to detach from Horizontal and Vertical Frames
B Remove screws from top Horizontal Frame to detach from LCD Panel
B Remove screws from top Horizontal Frame to detach from LCD Panel
4 from XBR-52LX905 Only
5 from XBR-60LX905 Only
C Remove screws from Vertical Frames to detach from LCD Panel
4 from XBR-52LX905 Only
8 from XBR-60LX905 Only
D Slide out Frame Clamps to detach Vertical Frames from LCD Panel
4 from XBR-52LX905 Only
6 from XBR-60LX905 Only
E Remove 4 screws from bottom Horizontal Frame to detach
from LCD Panel
F Remove 4 screws from bottom Horizontal Frame to detach
from LCD Panel
G Lift up Bottom Cabinet Assembly Left to
remove from Bottom Horizontal Frame
H Lift up Bottom Cabinet Assembly Center
to remove from Bottom Horizontal Frame
I Lift up Bottom Cabinet Assembly Right
to remove from Bottom Horizontal Frame
E
F
A
C
D
G
H
I
B
255
253
254
256
257
258
259
251
252
XBR-52LX905/60LX905
18
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-6. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
1-7. SCREW LEGEND
1-8. CONNECTORS
301
1-837-667-12
CONNECTOR ASSEMBLY
(XBR-52LX905 ONLY)
*
301
1-837-532-12
CONNECTOR ASSEMBLY
(XBR-60LX905 ONLY)
302
1-910-101-22
HARNESS ASSEMBLY
(XBR-52LX905 ONLY)
302
1-910-101-24
HARNESS ASSEMBLY
(XBR-60LX905 ONLY)
303
1-837-668-11
(LVDS) LEAD WIRE WITH CONNECTOR
(XBR-52LX905 ONLY)
303
1-837-669-11
(LVDS) LEAD WIRE WITH CONNECTOR
(XBR-60LX905 ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
*
304
1-910-100-13
CONNECTOR ASSEMBLY 15P
(XBR-52LX905 ONLY)
*
304
1-910-100-15
CONNECTOR ASSEMBLY 15P
(XBR-60LX905 ONLY)
305
1-910-100-63
CONNECTOR ASSEMBLY 4P
(XBR-52LX905 ONLY)
305
1-910-101-58
CONNECTOR ASSEMBLY 4P
(XBR-60LX905 ONLY)
CN6150
CN6151
GE4B: CN6102
GE4A: CN6003
GE4A: CN6003
GE4B/GE4A
CN2602
CN2600
CN2561
CN3800
CN4300
BUHS
TCON
SP
SP
HLR
HEM
WIFI
CAMERA MODULE
SWITCH UNIT
POWER SWITCH
301
302
303
304
305
P/N
DESCRIPTION
REMARKS
TOTAL
Š
2-580-603-01 SCREW, +PSW M4X16
RC(8)
8
š
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 RC to TERMINAL BRKT(1), RC to SIDE JACK BRKT(1)
2
Ť
2-345-219-11 +B IB 3X-- CM3
WIFI ANTENNA(2)
2
ť
2-580-608-01 SCREW, +PSW M5X16
TABLE-TOP STAND(4), NECK to BASE(4)
8
Ū
2-580-592-01 SCREW, +PSW M3X8
GE4B(5), BUHS(9), LVDS(2), ORNMNT CAMERA(1), CORNER JOINTS(8), HORZ/VERT FRMS(12), WIFI(2)
39
Ũ
4-159-298-01 SCREW, +PSW M4X10
UC(2), VESA(2), BTM FRM(5), BTM HRZ FRM(4)
13
Ŭ
4-178-167-01 SCREW, ORNAMENTAL
RC(4)
4
ṿ
2-580-590-01 SCREW, +PSW M3X5
B FRM-R(5), B FRM-L(3)
8
P/N
DESCRIPTION
REMARKS
TOTAL
Š
2-580-603-01 SCREW, +PSW M4X16
RC TOP(2), RC BTM(8)
10
š
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3 RC to TERMINAL BRKT(1), RC to SIDE JACK BRKT(1)
2
Ť
2-345-219-11 +B IB 3X-- CM3
WIFI ANTENNA(2)
2
ť
2-580-608-01 SCREW, +PSW M5X16
TABLE-TOP STAND(4), NECK to BASE(4)
8
Ū
2-580-592-01 SCREW, +PSW M3X8
GE4A(5), BUHS(9), LVDS(2), ORNMNT CAMERA(1), CORNER JOINTS(8), HORZ/VERT FRMS(17), WIFI(2), AC(1)
45
Ũ
4-159-298-01 SCREW, +PSW M4X10
UC(1), VESA(2), BTM FRM(6), BTM HRZ FRM(4)
13
Ŭ
4-178-167-01 SCREW, ORNAMENTAL
RC(4)
4
ṿ
2-580-590-01 SCREW, +PSW M3X5
B FRM-R(5), B FRM-L(3)
8
XBR-52LX905
XBR-60LX905
XBR-52LX905/60LX905
19
DISASSEMBLY/PART NUMBER INFORMATION
1-9. ACCESSORIES AND PACKING
1-458-251-11
3D GLASSES
A-1768-621-A
BAG ASSEMBLY, SCREW C
(XBR-52LX905 ONLY)
4-187-900-11
MANUAL, INSTRUCTION
!
1-837-635-12
POWER-SUPPLY CORD
(XBR-60LX905 ONLY)
!
1-837-645-12
POWER-SUPPLY CORD SET
(XBR-52LX905 ONLY)
A-1782-430-A
SPACER ASSEMBLY(B)
(XBR-52LX905 ONLY)
A-1782-431-A
SPACER ASSEMBLY(C)
(XBR-60LX905 ONLY)
*
4-180-046-11
SUPPLEMENT(STAND INSTALLATION)
(XBR-52LX905 ONLY)
1-10. MISCELLANEOUS
4-119-044-01
+PSW6(W) STAND
(XBR-60LX905 ONLY)
4-180-957-01
BADGE, XBR LOGO(H6)
3-701-617-62
BAG, POLYETHYLENE, STANDARD
(XBR-52LX905 ONLY)
3-299-766-01 CATCHER
4-257-271-12
GINGA ACCESS FLYER
*
4-175-876-01
LABEL, COMPONENT (SIDE)
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
7-682-147-01
SCREW, +P 3X6
2-580-593-01
SCREW, +PSW M3X8
2-580-600-11
SCREW, +PSW M4X8
4-100-136-01
SHEET (CORE), C
*
4-260-000-01
SPACER (P-CHASSIS)
4-184-304-01
SPACER, BC (PIA)
X-2348-140-3
SUPPORT, BELT KIT
4-198-769-01
TAPE (FPC)
4-198-769-11
TAPE (FPC)
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
(XBR-52LX905 ONLY)
4-197-276-01
TAPE, AL (COVER A)
4-197-277-01
TAPE, AL (COVER B)
4-197-278-01
TAPE, AL (COVER C)
4-197-281-11
TAPE, AL (FPC)
1-11. REMOTE COMMANDER
1-487-712-22
REMOTE COMMANDER (RM-YD042)
Click on the first or last page to see other XBR-52LX905 / XBR-60LX905 (serv.man3) service manuals if exist.