Sony KV-XA21M30 Service Manual ▷ View online
–
9
–
–
KV
-XA21M30/XA21M63
-XA21M30/XA21M63
RM-952
KV
-XA21N90
-XA21N90
RM-915
3
Do not install the TV in an unstable position.
Use a proper TV stand.
Use a proper TV stand.
Do not place any objects on the TV.
WARNING (continued)
Using Your New TV
4
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R
L
1
L(MONO)
R
VIDEO
IN
MONITOR
OUT
AUDIO
VIDEO
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Using Your New TV
F connector
(not supplied)
(not supplied)
Rear of TV
Connecting a VCR
To watch the video input, press VIDEO (see page 11).
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To video
and audio
outputs
and audio
outputs
Audio/Video cable
(not supplied)
To 8
(antenna)
(antenna)
To antenna
output
output
: Signal flow
VCR
To VIDEO IN 1
Rear of TV
Antenna cable
(not supplied)
–
10
–
KV
-XA21M30/XA21M63
-XA21M30/XA21M63
RM-952
KV
-XA21N90
-XA21N90
RM-915
Using Your New TV
5
Using Y
our New TV
Front of TV
Notes (KV-XA21N90)
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Insert the batteries
into the remote
into the remote
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
• The AUTO PROGRAM button on the remote works as the AUTO
PROGR button on the TV.
AUTO
PROGR
1
1
2
3
1
2
3
CABLE: ON
AUTO PROGRAM
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
PIC MODE
POWER
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Using Your New TV
5
Using Y
our New TV
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Front of TV
Notes (except KV-XA21N90)
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
(not used for this model)
• Do not connect video equipment to the t 2 (video input) jacks at the
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
not be displayed properly on the screen.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Insert the batteries
into the remote
into the remote
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 11).
Note (KV-XA21M63 only)
• During automatic channel presetting, your TV screen will indicate
• During automatic channel presetting, your TV screen will indicate
“AUTO” for the TV system.
AUTO
PROGR
1
1
VHF LOW AUTO
1
2
2
L(MONO)
R
PROGR
SELECT
AUTO
PROGR
PROGR
!
–
11
–
KV
-XA21M30/XA21M63
-XA21M30/XA21M63
RM-952
KV
-XA21N90
-XA21N90
RM-915
Using Your New TV
6
Connecting optional components
(KV-XA21N90)
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press VIDEO (see page 11).
Connecting a camcorder/video game equipment
using the video input jacks
using the video input jacks
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
• You can also connect video equipment to the VIDEO IN 1 jacks at the rear
of your TV.
Connecting audio/video equipment using the
MONITOR OUT jacks
MONITOR OUT jacks
Note
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
: Signal flow
To VIDEO 2 INPUT
or
Audio/Video cable (not supplied)
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
Antenna cable (not supplied)
Audio/Video cable (not supplied)
1
L(MONO)
R
VIDEO
IN
MONITOR
OUT
AUDIO
VIDEO
To
MONITOR
OUT
MONITOR
OUT
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
Using Your New TV
6
Connecting the 3D WOOFER
(KV-XA21M63 only)
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Attach the 3D WOOFER into the footholds on the top of your TV.
2
Connect the wires to the 3D WOOFER (8
Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
to the # black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.
with the neighbouring 3D WOOFER terminal.
Rear of TV
Black
wire
wire
Red
wire
wire
WOOFER (8 )
– +
WOOFER (8 )
– +
3D WOOFER
1
2
–
12
–
KV
-XA21M30/XA21M63
-XA21M30/XA21M63
RM-952
KV
-XA21N90
-XA21N90
RM-915
Using Your New TV
6
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press t (see page 13).
Connecting a camcorder/video game equipment
using the t (video input) jacks
using the t (video input) jacks
Notes
(KV-XA21M30 only)
• You can also connect video equipment to the t 1 (video input) jack at
(KV-XA21M30 only)
• You can also connect video equipment to the t 1 (video input) jack at
the rear of your TV.
(not used for this model)
• You can also connect video equipment to the t 1 or 2 (video input) jacks
• You can also connect video equipment to the t 1 or 2 (video input) jacks
at the rear of your TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
not be displayed properly on the screen.
Connecting audio/video equipment using the T
(monitor output) jacks
(monitor output) jacks
(not used for this model)
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
: Signal flow
To
t
2
(video input)
or
Audio/Video cable (not supplied)
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
2
L(MONO)
R
2
L(MONO)
R
PROGR
SELECT
AUTO
PROGR
PROGR
To T
(monitor
output)
(monitor
output)
(KV-XA21M30)
Using Your New TV
7
Using Y
our New TV
Note
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
KV-XA21M30/XA21M63
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
To T
(monitor output)
(monitor output)
Antenna cable (not supplied)
Audio/Video cable (not supplied)
L(MONO)
1
Click on the first or last page to see other KV-XA21M30 service manuals if exist.