DOWNLOAD Sony KV-XA21M30 Service Manual ↓ Size: 7.9 MB | Pages: 83 in PDF or view online for FREE

–

 17 

–

Using Your New TV

13

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous program
number

Display the on-screen information*

Adjust the volume of all program
numbers automatically

Adjust the picture position when it
is not aligned to the TV screen
(not used for this model)

* The picture, sound, and either the program number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three seconds.

Press SELECT until
“LANGUAGE / 

 :

ENGLISH”appears on the
screen.

Press + or – to select
“

“.

Tip
•

You can also use SELECT and 2 +/– on the TV to select the on-screen
display language.

SELECT

?/

1

. The 1 indicator on the TV lights up red.

!

 on the TV.

%

.

t to select “VIDEO 1” or “VIDEO 2”.
To return to the TV program, press a.

JUMP.

.

SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.

SELECT repeatedly until “PIC ROTATION” appears,
then press + or – to adjust the alignment of the picture
position.

The 

+

 or 

 icon on the screen flashes while adjusting.

(KV-XA21M30 only)

10

Using Your New TV

Press POWER to turn on
the TV.

When the TV is in the
standby mode (the
STANDBY indicator on the
TV is lit red), press POWER
on the remote or
CHANNEL +/– on the TV.

To select the channel
number, press the number
buttons and then press
ENT, or press CH +/–.

Press VOL +/– to adjust
the volume.

This section explains functions used
while watching the TV.  Most operations
can be done using the remote.

TV

1

2

3

4

6

7

8

9

0

5

VOL

CH

CHANNEL

POWER

STANDBY/
STEREO/
WAKE UP

SELECT

VIDEO INPUT

VOLUME

AUTO
PROGR

R

VIDEO 2 INPUT

VIDEO L (MONO)

AUDIO

CHANNEL

SELECT

VIDEO INPUT

VOLUME

AUTO

PROGR

POWER

POWER

(KV-XA21N90)

–

 18 

–

11

Using Your New TV

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Change the color system setting
(for the VIDEO INPUT jack only)

Jump back to the previous channel
number

Display the on-screen information*

Press POWER on the remote. The STANDBY indicator
on the TV lights up red.

Press POWER on the TV.

Press MUTING.

Press VIDEO to select “VIDEO 1” or “VIDEO 2”.
To return to the TV program, press TV.

Press SELECT repeatedly until “COLOR SYS” appears,
then press + or – to select the appropriate color system
until the color is optimal.

Press JUMP.

Press DISPLAY.

* The picture, sound, and either the channel number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three seconds.

Press SELECT until
“

 /LANGUAGE: 

 ”

appears on the screen.

Press + or – to select
“ENGLISH“.

Tip
• You can also use SELECT and VOLUME +/– on the TV to select the on-

screen display language.

SELECT

12

Using Your New TV

Press WAKE UP until the
desired period of time
appears.

The Wake Up timer
starts immediately
after you have set it.

Select the channel number or video input you want to display when you
wake up.

Press POWER on the remote or set the Sleep timer if you want the TV to turn
off automatically.

The WAKE UP indicator on the TV lights up orange.

Press WAKE UP until “WAKE UP TIMER: OFF” appears or turn off
the TV’s main power.

Note
•

If no buttons or controls are pressed for more than two hours after the
TV is turned on using the Wake Up timer, the TV automatically goes into
the standby mode.  To continue watching the TV, press any button or
control on the TV or the remote.

Press SLEEP until the
desired period of time
appears.

The Sleep timer
starts immediately
after you have set it.

Press SLEEP until “SLEEP TIMER:  OFF” appears or turn the TV off.

WAKE UP

SLEEP

–

 19 

–

Using Your New TV

15

Press   until the desired
period of time appears.

The Wake Up timer starts
immediately after you
have set it.

Select the program number or video input you want to display when you
wake up.

Press ?/1 or set the Sleep timer if you want the TV to turn off automatically.

The   indicator on the TV lights up orange.

Press   until “WAKE UP TIMER: OFF” appears or turn off the TV’s
main power.

Note
•

If no buttons or controls are pressed for more than two hours after the
TV is turned on using the Wake Up timer, the TV automatically goes into
the standby mode.  To continue watching the TV, press any button or
control on the TV or the remote.

Press   until the desired
period of time appears.

The Sleep timer starts
immediately after you
have set it.

Press   until “SLEEP TIMER:  OFF” appears or turn the TV off.

Advanced Operations

16

You can customize the picture and
sound by selecting the picture and
sound modes or by adjusting its
settings.

You can change the sound effect by
selecting the surround mode.

Press PIC MODE
repeatedly until you get
the desired picture mode.

“DYNAMIC”

receive high contrast pictures.

“STANDARD”

receive normal contrast pictures.

“SOFT”

receive mild pictures.

Press SOUND MODE
repeatedly until you get
the desired sound mode.

“DYNAMIC”

listen to dynamic and clear sound that emphasizes the low and
high sound.

“DRAMA”

listen to sound that emphasizes vocals and background music.

“SOFT”

receive soft sound.

-

TV

0

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

PIC MODE

≥

≥

≥

SOUND

MODE

(except KV-XA21N90)

–

 20 

–

Advanced Operations

17

Press SELECT until the
desired setting appears.

Each time you press
SELECT, the setting
item will change as follows:

Press + or – to adjust the
item.

To adjust other items, repeat steps 1 to 2.

* “HUE” can be adjusted for the NTSC system only.

Notes
• When you select a picture or sound mode, the adjusted settings will be

reset according to the selected mode.

• You can also use SELECT and 

2

 +/– on the TV to adjust the picture and

sound settings.

SELECT

Advanced Operations

18

Press SELECT repeatedly
until “SURROUND”
appears.

Press + or – to select the
desired surround sound.

“MOVIE”

listen to sound that spreads out over a large area, giving the feeling
of being at a movie theatre.

“MUSIC”

listen to the sound that gives the feeling of being at a live concert.

“OFF”

turn off the surround sound.

Press SELECT repeatedly
until “SURROUND”
appears.

Press + or – to select “ON”.

To turn off the surround
mode, select “OFF” .

SELECT

SELECT