Sony KLV-40W300A / KLV-46W300A Service Manual ▷ View online
KLV-40/46W300A (WB) 2-5
Change Setting data by service mode
2-6. Change Setting Data for BEM
1. Press “2/5” on remote commander to select (up / down) category.
2. Press “1/4” on remote commander to select (up / down) Item.
3. Press “3/6” on remote commander to change (up / down) data.
2. Press “1/4” on remote commander to select (up / down) Item.
3. Press “3/6” on remote commander to change (up / down) data.
Press 3: increment
Press 6: decrement
Press 6: decrement
Service menu
Remote Commander
1
2
3
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
KLV-40/46W300A (WB) 2-6
Change data by service mode
Service menu
2-7. Write data for BEM
1. Press “Mute” on remote commander. It shows green “
SERVICE
” changes to
green “
WRITE
”.
2. Press “0” on remote commander. Green “
WRITE
” changes to red “
WRITE
”.
It indicates writing processing.
3. After for few second, red “
WRITE
” changes to green
“
SERVICE
”. Writing process is done at this point.
SERVICE
->
WRITE
->
WRITE
->
WRITE OK
1
2
Remote Commander
KLV-40/46W300A (WB) 2-7
Soft ware version check
2-8. KLV-40/46W300A Model
Data
Application
BEM
Data
Application
TVM
Data
Application
ASUKA
(only for AEP)
Application
EMMA2LR
Type
CPU
KLV-40/46W300A (WB) 2-8E
Remote Commander
Set to shipping condition
2-9. How to change shipping condition.
1. During service mode, press “8” on remote commander.
2. Press “mute” on remote commander.
3. Press “0” on remote commander.
4. Display change to “
2. Press “mute” on remote commander.
3. Press “0” on remote commander.
4. Display change to “
SERVICE
”
“
RST-
”
“
RST-EXE
”
“
RST-EXE
”
1
2
3
The error history will be reset.
Click on the first or last page to see other KLV-40W300A / KLV-46W300A service manuals if exist.