Sony KDL-60EX720 / KDL-60EX723 Service Manual ▷ View online
KDL-60EX720/60EX723 55
SECTION 7 - SERVICE ADJUSTMENTS
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel
5
Volume
+
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E91B
PM1.012W00LU
PID:02050000
PB1.000W00LU
PNL:FDHR600NN0101
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
2
to move to the
002 MODEL category.
4. Press
1
to move to the
001 DEST item.
DIGITAL
SERVICE
002 MODEL
001 DEST
U/C
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the correct
destination of the TV.
Model Name
Destination
Data Value
KDL‐60EX720
US/CND
U/C
KDL‐60EX720
LA/MX
LTN‐ATSC
KDL‐60EX723
US/CND
U/C
CAUTION: Verify the DESTINATION is set correctly
before proceeding to the next step. If another
destination Data Value is selected, it may possibly
corrupt the software which would require a Main Board
replacement.
6. Press
MUTING
then press
0
to WRITE (Save) the
changes.
DIGITAL
SERVICE
002 MODEL
001 DEST
U/C
WRITE
KDL-60EX720/60EX723 56
SECTION 7 - SERVICE ADJUSTMENTS
When complete, the screen briefly indicates the
process is “Done”.
DIGITAL
SERVICE
002 MODEL
001 DEST
U/C
DONE
7. Proceed to “Selecting the Model Name”.
SELECTING THE MODEL NAME
The correct model name needs to be selected after updating the
software.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Selected the Segment Code
;
Selected the Destination
8. Press
1
to move to the
002 MODEL item.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-60EX720
9. If the correct model does not display, press
3
until the
model displayed matches the model of the TV.
10. Press
MUTING
then press
0
to WRITE (Save) the
changes.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-60EX720
WRITE
When complete, the screen briefly indicates the
process is “Done”.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-60EX720
DONE
11. Proceed to “Selecting the BU Trans”.
KDL-60EX720/60EX723 57
SECTION 7 - SERVICE ADJUSTMENTS
SELECTING THE BU TRANS
This procedure is to copy the White Balance adjustment data from
the TCON Board to the Main Board. The BU Trans service item is
under the VPC service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Selected the Segment Code
;
Selected the Destination
;
Selected the Model Name
12. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
VPC menu displays.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
13. To change the data value of the
BU_Trans, press
3
to
increase the data value to
1.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 1
NOTE: If the message displays “
DATA TRANSFER NG
”
the transfer is not complete. If that occurs, repeat step
13
.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 2
DATA TRANSFER NG
If successful, the data value changes to
3.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 3
DATA TRANSFER SUCCESS
14. Verify the
Data Transfer Success message displays.
15. Proceed to “Adding the Serial Number.”
KDL-60EX720/60EX723 58
SECTION 7 - SERVICE ADJUSTMENTS
ADDING THE SERIAL NUMBER
The replacement board does not contain a serial number. Use the
following instructions to add the customer’s serial number.
CAUTION: The serial number can only be entered once. Please
make sure to enter the correct serial number for the customer’s TV.
Verify before proceeding to the next step:
;
Selected the Segment Code
;
Selected the Destination
;
Selected the Model Name
;
Selected the BU Trans
16. Locate the serial number for the TV on the side of the
Rear Cover of the TV.
MODEL NO
KDL-60EX720
SERIAL NO
3001318
17. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
DIGITAL menu displays.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:3D65E91B
PM1.012W00LU
PID:02050000
PB1.000W00LU
PNL:FDHR600NN0101
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
18. Press
2
to move to the
002 MODEL category.
DIGITAL
SERVICE
002 MODEL
000 SEG
N4
Click on the first or last page to see other KDL-60EX720 / KDL-60EX723 service manuals if exist.