Sony KDL-52V4100 / KDL-52W4100 / KDL-52WL140 Service Manual ▷ View online
33
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
LVDS Cable Routing/Dress
(CRITICAL FOR EMI)
Apply Cho-Fab Tape
P/N:2-888-494-01
Over opening in LVDS Cable near TCON
This Cho-Fab tape (conductive) is CRITICAL
for EMI. The tape MUST contact panel/LVDS.
P/N:2-888-494-01
Over opening in LVDS Cable near TCON
This Cho-Fab tape (conductive) is CRITICAL
for EMI. The tape MUST contact panel/LVDS.
Apply Himelon Tape OVER Cho-Fab tape
P/N:2-661-260-01
MAKE SURE Himelon tape covers Cho-Fab
and that both himelon tape and Cho-Fab tape
are firmly taped to panel
P/N:2-661-260-01
MAKE SURE Himelon tape covers Cho-Fab
and that both himelon tape and Cho-Fab tape
are firmly taped to panel
(EMI CRITICAL)
34
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
AC Inlet
Side Clamp to Lower LCD Bracket
to hold AC Inlet Wires.
Also Side Clamp on Spine Frame
to hold AC Inlet Wire.
to hold AC Inlet Wires.
Also Side Clamp on Spine Frame
to hold AC Inlet Wire.
Sheet Core C to Lower Bracket
Metal edge (sharp edge).
Metal edge (sharp edge).
11
12
Mounted “M” Clip will hold
AC Inlet Wire.
AC Inlet Wire.
NOTE:
2
nd
Cable Tie is dressed
ABOVE the M-Clip.
Dress AC Cables to the SIDE
Of the G5 Board.
Reason:
If cables are not pushed to the side
they will touch rear cover – N.G.
Of the G5 Board.
Reason:
If cables are not pushed to the side
they will touch rear cover – N.G.
35
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
H Boards / Speaker Harness
Apply Sheet Core C over RED UL tape
once harness is centered over panel.
once harness is centered over panel.
Center RED UL tape on the harness to the Center of
the panel. Use Plastic Boss and “dimple” as guides
where center of panel is.
the panel. Use Plastic Boss and “dimple” as guides
where center of panel is.
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
☛
36
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
H Boards/Speaker Harness
Apply Sheet Core C over UL tape
as shown.
as shown.
1
2
3
Click on the first or last page to see other KDL-52V4100 / KDL-52W4100 / KDL-52WL140 service manuals if exist.