Sony KDL-52V4100 / KDL-52W4100 / KDL-52WL140 Service Manual ▷ View online
21
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
Combination H Boards/Speaker Harness
Apply Sheet Core C over BLACK UL TAPE
on Harness Assy.
on Harness Assy.
Apply LCD TAPE over panel
sharp edge.
sharp edge.
4
1
2
Detail of where to align
LCD Tape. Center tape over
Cut-out on side of panel edge
LCD Tape. Center tape over
Cut-out on side of panel edge
22
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
Combination H Boards/Speaker Harness
NOTE routing of H3E Board wires.
BE CAREFUL of Pinch Points
(circled in RED)
BE CAREFUL of Pinch Points
(circled in RED)
23
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
Balancer Board to D4Z Board 9P Conn Assy.
NOTE DETAIL PHOTO of Conn Assy.
Wire are ABOVE plastic CLIP on panel.
Wire are ABOVE plastic CLIP on panel.
Apply x3 Sheet Core C himelon tape
as shown. Use BLACK UL TAPE on
the connector assy as guide where
To place himelon tape.
as shown. Use BLACK UL TAPE on
the connector assy as guide where
To place himelon tape.
5
6
7
24
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52V4100 ONLY
SHEET CORE C (2-688-011-01)
QTY=11
LCD TAPE (2-688-062-01)
QTY=6
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=12
CHO-FAB TAPE (2-888-494-01)
QTY=1
HIMELON TAPE (2-661-260-01)
QTY=1
LEGEND
Panel Balancer Board Conn Assy.
Detail
Detail
Use Plastic Pin as guide for Black UL
Tape position.
Wires CANNOT be below level of this
Plastic pin (pinch point).
Apply Sheet Core C to secure wires.
Tape position.
Wires CANNOT be below level of this
Plastic pin (pinch point).
Apply Sheet Core C to secure wires.
With Lower LCD Bracket installed,
Wires will be clear of metal edge
as shown if Black UL Tape is
Aligned with white plastic pin
(as shown)
Wires will be clear of metal edge
as shown if Black UL Tape is
Aligned with white plastic pin
(as shown)
7
Click on the first or last page to see other KDL-52V4100 / KDL-52W4100 / KDL-52WL140 service manuals if exist.