Sony KDL-52V4100 / KDL-52W4100 / KDL-52WL140 Service Manual ▷ View online
49
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
Switch Unit Routing/Dressing
Apply Tape, LCD as shown.
4
Apply Slide Clamp (4 Places) as shown.
2
3
4
9
1
9
1
8
50
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
LVDS Cable Routing/Dress
(EMI CRITICAL)
Apply 3x8mm Screw
to secure LVDS Cable to panel and
BU Board bracket.
MAKE SURE that the LVDS clip is
Centered between guides on Main Bracket
and Panel BEFORE applying screw.
to secure LVDS Cable to panel and
BU Board bracket.
MAKE SURE that the LVDS clip is
Centered between guides on Main Bracket
and Panel BEFORE applying screw.
LVDS CLIP/SCREW IS CRITICAL FOR EMI
9
10
2
1
Route LVDS Cable in Slide Clamp.
Clamps are necessary to keep LVDS cable
from touching high-voltage area of D5-Bd.
Clamps are necessary to keep LVDS cable
from touching high-voltage area of D5-Bd.
1
52W LVDS cable has x3
White UL tape bands.
White UL tape bands.
51
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
AC Inlet
Side Clamp to Lower LCD Bracket
to hold AC Inlet Wires.
Also Side Clamp on Spine Frame
to hold AC Inlet Wire.
to hold AC Inlet Wires.
Also Side Clamp on Spine Frame
to hold AC Inlet Wire.
Sheet Core C to Lower Bracket
Metal edge (sharp edge).
Metal edge (sharp edge).
10
11
Mounted “M” Clip will hold
AC Inlet Wire.
AC Inlet Wire.
NOTE:
2
nd
Cable Tie is dressed
ABOVE the M-Clip.
Dress AC Cables to the SIDE
Of the G5-Bd.
Reason:
If cables are not pushed to the side
they will touch rear cover – N.G.
Of the G5-Bd.
Reason:
If cables are not pushed to the side
they will touch rear cover – N.G.
52
KDL-52V4100/52W4100/52WL140
KDL-52V4100/52W4100/52WL140
KDL-52W4100/52WL140 ONLY
LEGEND
SHEET CORE C (2-688-011-01)
QTY=12
LCD TAPE (2-688-062-01)
QTY=4
SLIDE CLAMP (2-650-770-01)
QTY=1 (UPPER VESA
SUPPORT)
SLIDE CLAMP (2-650-770-11)
QTY=11
4P Cable (TCON POWER) Routing/Dress
(EMI CRITICAL PART)
Route wires in
Slide Clamp as shown.
Slide Clamp as shown.
9
11
12
Apply Sheet Core C (2 Places)
on Connector Assy.
on Connector Assy.
CAUTION:
Wires MUST be firmly taped to panel.
(EMI CRITICAL)
1
8
Click on the first or last page to see other KDL-52V4100 / KDL-52W4100 / KDL-52WL140 service manuals if exist.