Sony KDL-46HX855 / KDL-55HX855 Service Manual ▷ View online
KDL-46HX855/55HX855 36
SECTION 5 - UPDATES AND ADJUSTMENTS
4. To clear the error history and error count
press
8
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
5. Exit Self Check by turning the TV power off.
6. Cycle AC Power.
6. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
RESOLVING AN 8 BLINK ERROR
It’s possible that a customer may report an 8X blink error code even though
an 8X blink error isn’t an option in the Self Diagnosis Self Check list. An 8X
blink error is mainly used during TV software development. To verify that
there is an actual 8X error, view the TV’s Self Diagnosis Self Check list
history, specifically at the bottom of the list WDT (Watch Dog Timer) error
codes.
The 8X error code could be the result of:
The 8X error code could be the result of:
●
Software Issue
●
Network Issue
●
Skype Login Issue
●
Incompatible USB Device Plugged Inserted
●
Defective Main Board
Every time 3 errors are registered in the Self Diagnosis Self Check screen
the TV will shut down and activate an 8X blink pattern on the Standby LED.
If an error count is indicated, usually as an 103 HOST_WDT error, follow
these instructions to update the TV.
SELF CHECK
000 RESERVED
----------------- ----------------- ----------------- 00
000 RESERVED
----------------- ----------------- ----------------- 00
002 MAIN_POWE ----------------- ----------------- ----------------- 00
003 DC_ALERT
003 DC_ALERT
----------------- ----------------- ----------------- 00
003 AUD_PROT
----------------- ----------------- ----------------- 00
003 HDMI_EQ
----------------- ----------------- ----------------- 00
003 TU_DEMOD ----------------- ----------------- ----------------- 00
004 VLED
004 VLED
----------------- ----------------- ----------------- 00
004 LD_ERR
----------------- ----------------- ----------------- 00
005 HFR_ERR
----------------- ----------------- ----------------- 00
005 TCON_ERR
----------------- ----------------- ----------------- 00
005 P_ID-ERR
----------------- ----------------- ----------------- 00
006 BACKLITE
----------------- ----------------- ----------------- 00
007 TEMP_ERR
----------------- ----------------- ----------------- 00
007 FAN_ERR
----------------- ----------------- ----------------- 00
010 EMITTER
----------------- ----------------- ----------------- 00
101 VPC_WDT
----------------- ----------------- ----------------- 00
102 MEPS_WDT ----------------- ----------------- ----------------- 00
103 HOST_WDT 1201231325 1201231136 ----------------- 02
104 STBY_WDT
103 HOST_WDT 1201231325 1201231136 ----------------- 02
104 STBY_WDT
----------------- ----------------- ----------------- 00
00345 000333 00345
KDL-46HX855/55HX855 37
SECTION 5 - UPDATES AND ADJUSTMENTS
VERIFYING THERE IS AN 8 BLINK ERROR
1. Disconnect all inputs to the TV
2. Cycle AC Power
2. Cycle AC Power
(Unplug and Plug AC Cord from the AC Outlet).
3. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Resetting
the TV to Factory Condition” on page 37
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 35
RESETTING THE TV TO FACTORY CONDITION
Verify before proceeding to the next step:
;
Verified the error is an 8X error
1. To reset the TV, follow the instructions for
“Resetting the TV to
Factory Condition” on page 42
.
2. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Updating
the Software” on page 37
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 35
.
UPDATING THE SOFTWARE
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
1. Check for latest Software Version through Network Connection or
Reference Library.
2. Connect and Configure TV Network Connection.
3. Display the menu by pressing
HOME
.
4. Using the and the
on the on the Remote Control,
select the following:
Settings
Product Support
Software
Update.
NOTE: If TV is not connected to a network go to
http://www.sony.
com/asp
and download the latest software for these models and
Install using a USB Thumb Drive.
5. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Replacing
the Main Board” on page 37
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 35
.
REPLACING THE MAIN BOARD
The Main Board should be replaced only if all other options have not
resolved the issue.
Verify before proceeding to the next step:
resolved the issue.
Verify before proceeding to the next step:
;
Verified the error is an 8X error.
;
Reset the TV to Factory Condition
;
Updated the Software
1. Follow all of the instructions in
“Completing Service Requirements
When Replacing the Main Board” on page 28
.
KDL-46HX855/55HX855 38
SECTION 5 - UPDATES AND ADJUSTMENTS
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL OR TCON BOARD
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
●
Updating the Software
●
Copying the BU Flash Data
●
Confirming the Model ID and Product ID
●
Resetting the Panel Operation Time
●
Clearing the Self Diagnosis Self Check Information
UPDATING THE SOFTWARE
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV ON.
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software”.
2. After the update is complete, proceed to
“Copying the BU Flash
Data”.
COPYING THE BU FLASH DATA
This procedure is to copy the White Balance adjustment data from the
TCON Board to the Main Board. The BU Flash service item is under the
VPC service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Access Service Mode by pressing the following buttons on the
Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.109AAA
RF:0000
WF1.101WAA
WF:9.2.1.12.4
DF3.300W00AA
WF:0A
YM1.409W00AA
FD:0.071
M4.091C
(DM1.109AAA)
DD2.001W00AA
PK2.001W00AA
<PEM>
MID:0543A11F
PM1.000W00AA
PID:01041040
PB1.300W00AA
PNL:FQLR460LT0101
TUNER: ENABLE
PL2.102W00A2
PD1.004G00B0
4. Press
JUMP
or
OPTIONS
on the Remote Commander until the
VPC menu displays.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 0
KDL-46HX855/55HX855 39
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Press
2
to move to the
001 DATA_BAKUP category and the 000
BU_FLASH item display.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 0
6. To change the data value of the
BU_FLASH,
press
3
to increase the data value to
1.
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 1
NOTE: If the message displays
DATA TRANSFER NG
the transfer
is not complete. If that occurs, repeat step 6.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 2
DATA TRANSFER NG
If successful, the data value changes to
3.
VPC
SERVICE
001
000
DATA_BAKUP
BU_FLASH 3
DATA TRANSFER SUCCESS
7. Verify the
Data Transfer Success message displays.
8. Proceed to Confirming the Model ID and Product ID.
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that the
correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Copied the BU Flash Data
9. Press
JUMP
or
OPTIONS
on the Remote Commander until
the
DIGITAL menu displays.
10. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.109AAA
RF:0000
WF1.101WAA
WF:9.2.1.12.4
DF3.300W00AA
WF:0A
YM1.409W00AA
FD:0.071
M4.091C
(DM1.109AAA)
DD2.001W00AA
PK2.001W00AA
<PEM>
MID:0543A11F
PM1.000W00AA
PID:01041040
PB1.300W00AA
PNL:FQLR460LT0101
TUNER: ENABLE
PL2.102W00A2
PD1.004G00B0
Click on the first or last page to see other KDL-46HX855 / KDL-55HX855 service manuals if exist.