Sony KDL-32EX720 / KDL-32EX723 / KDL-40EX720 / KDL-40EX723 / KDL-46EX720 / KDL-46EX723 / KDL-55EX720 / KDL-55EX723 / KDL-60EX720 Service Manual ▷ View online
Service Adjustment
KDL- 32, 40, 46, 55, 60 EX720, 32, 40, 46, 55 EX723
RM-GD019
1. To change category, item and data in CHASSIS or VPC service mode:
a. Press key
2 or 5 on remote commander to select (up or down) category.
4-4. Change data by Service Mode 1 (Chassis and VPC module)
2. To save changed data in Service Mode 1
a. Press key
Mute on remote commander. It shows green SERVICE changes
b. Press key
1 or 4 on remote commander to select (up or down) Item.
c. Press key
3 or 6 on remote commander to change(up or down) data.
Remote commander key : 1, 2, 3 is for increment
Remote commander key : 4, 5, 6 is for decrement
Remote commander key : 4, 5, 6 is for decrement
to green WRITE.
b. Press key
0. Green WRITE changes to red WRITE. It indicate writing is
processing.
c. After a while, red WRITE changes to green SERVICE. Writing process is
done at this point.
Changing category
Changing Item
3. TV reboot is necessary for applying data change.
(a)
(b)
Indicate saving
process
process
CHASSIS SERVICE
000 WYVERN
000 S2_NOISE_TH 32
Changing Item
a
c
CHASSIS WRITE
000 WYVERN
000 S2_NOISE_TH 32
000 WYVERN
000 S2_NOISE_TH 32
CHASSIS Service Menu Sample
Changing data
CHASSIS Service Menu Sample
b
c
CHASSIS Service Menu Sample
a
b
(c)
Remote Commander
Remote Commander
4
8
Service Adjustment
KDL- 32, 40, 46, 55, 60 EX720, 32, 40, 46, 55 EX723
RM-GD019
To change category, item and data in DIGITAL service mode (except 003
DIG_SRV_MODE category):
DIG_SRV_MODE category):
4-5. Change data by Service Mode 2 (Digital Service Mode)
4-5-1. Change data for all Except 003 DIG_SRV_MODE
4-5-1. Change data for all Except 003 DIG_SRV_MODE
To change item and data in DIGITAL service mode (003 DIG_SRV_MODE
category):
Pl
category):
Pl
t b
thi
ti
i
i l
4-5-2. Change data for 003 DIG_SRV_MODE
a. Press key
2 or 5 on remote commander to select (up or down) category.
b. Press key
1 or 4 on remote commander to select (up or down) Item.
c. Press key
3 or 6 to change (up or down) data.
Remote commander key : 1, 2, 3 is for increment
Remote commander key : 4 5 6 is for decrement
Remote commander key : 4 5 6 is for decrement
Please note because this operation is special.
a. Press key
2 or 5 on remote commander to select 003 DIG_SRV_MODE.
b. Press key
1 or 4 on remote commander to select (up or down) Item.
c. Press key
0 or 10 on remote commander to select item.
d. Press key
1~9 on remote commander directly. Star (*) mark will move
accordingly.
Remote commander key : 4, 5, 6 is for decrement
No need to save for Digital Service Mode (except for 002 MODEL & 005
CHPRESET category)
CHPRESET category)
accordingly.
e. Press key
RETURN or SELECT to decide and advance next step.
Press Remote Commander key RETURN to return to the previous page.
a
DIGITAL
SERVICE
003 DIG_SRV_MODE
000 TEST_PATTERN ---
e
DIGITAL
SERVICE
004 TUNER
000 !A_NOSIG_DET 001
000 !A_NOSIG_DET 001
DIGITAL Service menu sample
b
c
DIGITAL(DIG SRV MODE)
SERVICE
d
DIGITAL Service menu sample
(
_
_
)
TEST_PATTERN
*1 Video
2 Audio
c
Remote Commander
DIGITAL Service menu sample
Remote Commander
49
Service Adjustment
KDL- 32, 40, 46, 55, 60 EX720, 32, 40, 46, 55 EX723
RM-GD019
4-5-3. Save changing data by Service Mode 2 (for 002 MODEL category)
1. This is only required only when B Board is replaced.
2. Items in Digital service mode for 002 MODEL category.
2. Items in Digital service mode for 002 MODEL category.
000 SEG ・・・Select segment information
To access to White Balance Service mode, choose VPC Service Mode.
a. Press key
a. Press key
1 or 4 on remote commander to select WB adjustment menu.
006 WB category will be seen on the menu
4-6. White Balance Adjustment
3. To change category, item and data :
a. Press key
2 or 5 on remote commander to select (up or down) category.
000 SEG
Select segment information
001 DEST・・・Select destination information
002 MODELNAME ・・・ Select Model Name
003 SERIAL ・・・Can be set Only Once for the new board
002 MODELNAME ・・・ Select Model Name
003 SERIAL ・・・Can be set Only Once for the new board
006 WB category will be seen on the menu.
b. Change data by pressing
3 or 6. Each range of these items is 0~255.
c. Press
mute ＋ 0 on remote commander to save the data.
SERVICE comment is changed to WRITE, indicating writing process.
d. After a while,
WRITE comment returns to SERVICE, which means
writing process is done. (takes about a couple of seconds)
b. Press key
1 or 4 on remote commander to select (up or down) Item.
c. Press key
3 or 6 on remote commander to change (up or down) data.
Remote commander key :
1, 2, 3 is for increment
Remote commander key :
4, 5, 6 is for decrement
4. Press key
mute +0 on remote commander . It shows red WRITE.
5 After a while red WRITE dissapears Green DONE will be displayed
VPC
SERVICE
VPC
SERVICE
5. After a while, red WRITE dissapears. Green DONE will be displayed.
006
WB
000
R_DRV
128
VPC
SERVICE
006
WB
006
WB
003
R_BKG
128
VPC
SERVICE
006
WB
a
b
7. Please save the item SEG, DEST, MODELNAME
sequentially. （①SEG
→②DEST→③MODELNAME）
6. For the item SEG, DEST MODELNAME, after changing each item, service
save(mute+0) is needed. For the item SERIAL, after inputting the serial
number, press key 12 or Enter, the serial data will be saved.
number, press key 12 or Enter, the serial data will be saved.
001
G_DRV
128
VPC
SERVICE
006
WB
002
B_DRV
128
004
G_BKG 128
VPC
SERVICE
006
WB
005
B_BKG
128
c
sequentially. （①SEG
②DEST ③MODELNAME）
8. When Saving the item "SEG", sometimes instead of
"Writing", word "Pending" will appear. In this case, skip the
"SEG", save the "DEST" and "MODELNAME" is OK.
"SEG", save the "DEST" and "MODELNAME" is OK.
3c
DIGITAL
SERVICE
002 MODEL
000 SEG
I-1
Write
4
3a
Remote Commander
VPC Service menu sample
3b
DIGITAL Service menu
Remote Commander
5
0
Service Adjustment
KDL- 32, 40, 46, 55, 60 EX720, 32, 40, 46, 55 EX723
RM-GD019
In VPC service mode:
a. Select 000 DATA_COPY category by pressing key
2 or 5 on remote
commander.
C
C
f
0 1
3
6
4-7. Restore WB / Gamma adj-data to B board.
4-8. Change the emitter output level (Applicable only for TD model).
1. Purpose to reduce the emitter LED output power strength.
2. Select VPC service mode and then press:
a. Select 005 TD category by pressing key
2 or 5 on remote commander.
b Select 000 EMIT STR item by pressing key
1 or 4 on remote commander
b. Change data from
0 to 1 by pressing key 3 or 6 on remote commander.
c. Wait until data is changed from
1 to 3.
d. When data is changed from
1 to 3, restoring process is finished.
e. In case data is changed from
1 to 2, keep default setting.
(No more process is needed.)
b. Select 000 EMIT_STR item by pressing key
1 or 4 on remote commander.
c. Change data from
0 to 1 by pressing key 3 or 6 on remote commander.
0: Strong (Default)
1: Weak
1: Weak
d. Save by pressing
Mute & 0 or 10 & Reboot.
VPC SERVICE
000
000
DATA COPY
VPC SERVICE
000
000
DATA COPY
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 3
000 BU_TRANS 3
DATA TRANSFER SUCCESS
000 DATA_COPY
000 BU_TRANS 1
000 BU_TRANS 1
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
DO NOT TOUCH ANY KEY NOW
b
a
b
c
005 TD
000 EMIT_STR 1
Sub Service menu
End restore process menu
sample
DATA TRANSFER SUCCESS
Restore process menu sample
DO NOT TOUCH ANY KEY NOW
a
b
c
Remote Commander
N t
d
Notes:
1. This restoration should be applied after USB-DL being assembled when
1. This restoration should be applied after USB-DL being assembled when
B Board is replaced.
2. This process only applicable for 120Hz / 240Hz models only.
Remote Commander
5
1
Click on the first or last page to see other KDL-32EX720 / KDL-32EX723 / KDL-40EX720 / KDL-40EX723 / KDL-46EX720 / KDL-46EX723 / KDL-55EX720 / KDL-55EX723 / KDL-60EX720 service manuals if exist.