Sony KDL-32EX550 Service Manual ▷ View online
KDL-32EX550 32
SECTION 5 - UPDATES AND ADJUSTMENTS
;
Added the Serial Number
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
120123132522 120123113645 --------------------- 02
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Error Count
4. To clear the error history and error count press
8
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
5. Exit Self Check by turning the TV power off.
6. Cycle AC Power.
6. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
KDL-32EX550 33
SECTION 5 - UPDATES AND ADJUSTMENTS
RESOLVING AN 8 BLINK ERROR
It’s possible that a customer may report an 8X blink error code even though
an 8X blink error isn’t an option in the Self Diagnosis Self Check list. An 8X
blink error is mainly used during TV software development. To verify that
there is an actual 8X error, view the TV’s Self Diagnosis Self Check list
history, specifically at the bottom of the list WDT (Watch Dog Timer) error
codes.
The 8X error code could be the result of:
The 8X error code could be the result of:
●
Software Issue
●
Network Issue
●
Skype Login Issue
●
Incompatible USB Device Plugged Inserted
●
Defective Main Board
Every time 3 errors are registered in the Self Diagnosis Self Check screen
the TV will shut down and activate an 8X blink pattern on the Standby LED.
If an error count is indicated, usually as an 103 HOST_WDT error, follow
these instructions to update the TV.
SELF CHECK
000 RESERVED
----------------- ----------------- ----------------- 00
000 RESERVED
----------------- ----------------- ----------------- 00
002 MAIN_POWE ----------------- ----------------- ----------------- 00
003 DC_ALERT
003 DC_ALERT
----------------- ----------------- ----------------- 00
003 AUD_PROT
----------------- ----------------- ----------------- 00
003 HDMI_EQ
----------------- ----------------- ----------------- 00
003 TU_DEMOD ----------------- ----------------- ----------------- 00
004 VLED
004 VLED
----------------- ----------------- ----------------- 00
004 LD_ERR
----------------- ----------------- ----------------- 00
005 HFR_ERR
----------------- ----------------- ----------------- 00
005 TCON_ERR
----------------- ----------------- ----------------- 00
005 P_ID-ERR
----------------- ----------------- ----------------- 00
006 BACKLITE
----------------- ----------------- ----------------- 00
007 TEMP_ERR
----------------- ----------------- ----------------- 00
007 FAN_ERR
----------------- ----------------- ----------------- 00
010 EMITTER
----------------- ----------------- ----------------- 00
101 VPC_WDT
----------------- ----------------- ----------------- 00
102 MEPS_WDT ----------------- ----------------- ----------------- 00
103 HOST_WDT 1201231325 1201231136 ----------------- 02
104 STBY_WDT
103 HOST_WDT 1201231325 1201231136 ----------------- 02
104 STBY_WDT
----------------- ----------------- ----------------- 00
00345 000333 00345
VERIFYING THERE IS AN 8X ERROR
1. Disconnect all inputs to the TV
2. Cycle AC Power
2. Cycle AC Power
(Unplug and Plug AC Cord from the AC Outlet).
3. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Resetting
the TV to Factory Condition” on page 33
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 31
RESETTING THE TV TO FACTORY CONDITION
Verify before proceeding to the next step:
;
Verified the error is an 8X error
1. To reset the TV, follow the instructions for
“Resetting the TV to
Factory Condition” on page 38
.
2. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Updating
the Software” on page 33
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 31
.
UPDATING THE SOFTWARE
Verify before proceeding to the next step:
;
Verified the error is an 8X error
;
Reset the TV to Factory Condition
1. Check for latest Software Version through Network Connection or
Reference Library.
2. Connect and Configure TV Network Connection.
KDL-32EX550 34
SECTION 5 - UPDATES AND ADJUSTMENTS
3. Display the menu by pressing
HOME
.
4. Using the and the
on the on the Remote Control,
select the following:
Settings
Product Support
Software
Update.
NOTE: If TV is not connected to a network download the latest
software for these models and Install using a USB device.
5. Do one of the following:
a. If the Standby LED blinks red 8 times, proceed to
“Replacing
the Main Board” on page 34
.
b. Clear the Self Check history by following the instructions
provided in
“Clearing the Self Diagnosis Self Check
Information” on page 31
.
REPLACING THE MAIN BOARD
The Main Board should be replaced only if all other options have not
resolved the issue.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Verified the error is an 8X error.
;
Reset the TV to Factory Condition
;
Updated the Software
1. Follow all of the instructions in
“Completing Service Requirements
When Replacing the Main Board” on page 25
.
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL OR TCON BOARD
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
●
Updating the Software
●
Confirming Model ID and Product ID
●
Resetting the Panel Operation Time
●
Clearing the Self Diagnosis Self Check information
UPDATING THE SOFTWARE
After replacing the LCD Panel or TCON Board you MUST UPDATE the
SOFTWARE to the latest version.
SOFTWARE to the latest version.
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV ON.
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software”.
2. After the update is complete, proceed to
“Confirming the Model ID
and Product ID”.
KDL-32EX550 35
SECTION 5 - UPDATES AND ADJUSTMENTS
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that the
correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
3. Press
JUMP
or
OPTIONS
on the Remote Commander until
the
DIGITAL menu displays.
4. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:1C23A122
-------------------
PID:03047040
-------------------
PNL:LTY320AN0301
TUNER: ENABLE
-------------------
-------------------
5. Using the information provided in the table below, verify the Model
ID and Product ID are correct.
Model Name Destination
Panel Name
Model‐ID
Product‐ID
KDL‐32EX550
LA/MX
LTY320AN0301 1C23A122
03047040
KDL‐32EX550
LA/MX
LTY320AN0501 1C23A12F
03047040
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
-------------------
PID:03047040
-------------------
PNL:LTY320AN0301
TUNER: ENABLE
-------------------
-------------------
Model ID
Software Version
Panel ID
Product ID
MID:1C23A122
6. Exit service mode by turning the TV power off.
7. Cycle AC Power.
7. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
8. Wait a minute while lights flash, and initial setup screen shows.
9. Proceed to “
9. Proceed to “
Resetting the Panel Operation Time
”.
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the Self
Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Confirmed Model ID and Product ID
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
Click on the first or last page to see other KDL-32EX550 service manuals if exist.