Sony KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL Service Manual ▷ View online
AZ1 VERSIONUP PROCEDURE(EU)
5
1. SERVICE BOARD ---------------------------------------------------------------- 6
1-1. Steps After Replacing the Service Board
1-2. Images Supported by the Service Board
1-3. How to Upgrade the Version by Using USB
1-4. Screens Displayed while Upgrading the Version
1-5. Confirming the Model ID and Product ID from the Service Menu
1-6. How to Change the Product ID (SEG)
1-7. How to Change BTK and GAISO of MIMAS
1-7-1. How to Change BTK of MIMAS (2a-2, 2a-3)
1-7-2. How to Change GAISO of MIMAS (3a-2, 5-0, 5-2)
1-7-2. How to Change GAISO of MIMAS (3a-2, 5-0, 5-2)
1-8. How to Change the PEM Settings
1-8-1. To reset WB_CTRL in PEM
1-9. How to Store Changed Data
1-10. Reconfirming Model_ID/Product_ID/Software_Ver
1-11. Be Sure to Perform the Following after Replacing the Set or B** Board.
2. SERVICE PANEL ---------------------------------------------------------------- 21
2-1. Steps After Replacing the Service Panel
2-2. How to Change the PEM Settings
2-3. How to Store Changed Data
2-4. How to Upgrade the Version by Using USB
2-5. Screens Displayed while Upgrading the Version
2-6. Confirming the Software Version from the Service Menu
2-7. Resetting the Panel Operation Time from the Service Menu
TABLE OF CONTENTS
3. T-CON BOARD ------------------------------------------------ 28
3-1. Steps After Replacing the T-con Board
3-2. How to Change the PEM Settings
3-3. How to Upgrade the Version by Using USB
3-4. How to Change the PEM Settings
3-5. How to Change the PEM Settings
3-6. Confirming the Software Version from the Service Menu
4. DRIVER BOARD ----------------------------------------------- 34
4-1. Steps After Replacing the Driver Board
4-2. How to Change the PEM Settings
4-3. How to Change the PEM Settings
4-4. Confirming the Software Version from the Service Menu
AZ1 VERSIONUP PROCEDURE(EU)
6
1. Replace the B*HS/BAL board.
2. By using the USB memory, upgrade Software.
3. Confirm and specify the following from the Service menu:
a. Confirm Model_ID and Product_ID of EMMA.
b. Perform settings by confirming BTK, GAISO, and PEM.
Note: Settings are required for the models in some areas.
c. Execute
INFORST
.
Note: If you change the settings above, write them in NVM.
4. Reconfirm the following information from the Service menu:
Confirm Model_ID, Product_ID, and Software Version.
5. Conclude the operation.
1-1. Steps After Replacing the Service Board
Note: Before operation, disconnect all cables connected to the set.
SEC.1 SERVICE BOARD
SEC.1 SERVICE BOARD
AZ1 VERSIONUP PROCEDURE(EU)
7
<Example> B*HS Board
B*HS Board
Service
No. A: common
40
40
”
”
46
46
”
”
52
52
”
”
55
55
”
”
60
60
”
”
Note: The combination of inches differs depending on the model.
1-2. Common Service Board
SERVICE BOARD
SERVICE BOARD
AZ1 VERSIONUP PROCEDURE(EU)
8
1. When you turn on the set after replacing the B*HS/BAL board, the green LED and amber LED may blink if no image and sound are
generated. Even so, insert USB for upgrade into the USB slot on the set while the set is turned on.
2. After inserting USB, the green LED and amber LED blink for a while. The set is reset about a minute later, and then the Standby LED
lights and the Communication LED blinks.
Note: After replacing the B*HS/BAL board, the upgrade startup screen may not be displayed. In addition, be sure not to remove USB
while it is writing.
3. After the writing is complete, the set is rebooted and the screen indicating the upgrade is complete is displayed. Remove USB from the set
and press the “Enter” button while the set is turned on.
Ex
trac
trac
t
1-3. How to Upgrade the Version by Using USB
SERVICE BOARD
SERVICE BOARD
Click on the first or last page to see other KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL service manuals if exist.