Sony KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL Service Manual ▷ View online
AZ1 VERSIONUP PROCEDURE(EU)
21
2-1. Steps After Replacing the LCD Panel
Note: Before operation, disconnect all cables connected to the set.
SEC.2 SERVICE PANEL
SEC.2 SERVICE PANEL
1. Replace the LCD Panel.
2. Specify the following from the Service menu:
a. Specify PRETEND_ID of DL in PEM.
3. By using the USB memory, upgrade Software.
4. After turning off and on the power, confirm the Software Version from the Service menu.
5. Reset the Panel Operation Time from the Service menu.
6. Conclude the operation.
AZ1 VERSIONUP PROCEDURE(EU)
22
PEM
SERVICE
001 DL
001
001
PRETENDED_ID
0
PEM Service menu
<To set PRETEND_ID in PEM>
1. Press the “2/5” key on the remote commander to select DL.
2. Press the “1/4” key on the remote commander to select PRETEND_ID.
3. Press the “3/6” key on the remote commander to select from 0 to 1.
Note: PRETENDED_ID can only be set in the PEM Model.
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
Press 3: increment
Press 6: decrement
Press 6: decrement
Remote Commander
a
b
c
Note: In order to avoid inconsistencies in Software Versions between the
B board and TCON board, be sure to rewrite PRETEND_ID.
2-2. How to Change the PEM Settings
SERVICE PANEL
SERVICE PANEL
AZ1 VERSIONUP PROCEDURE(EU)
23
<To store data changed in “PEM”>
a. Press “MUTING” on the remote commander.
“SERVICE” displayed in green is changed to “WRITE” displayed in red.
b. Press “0” on the remote commander.
“WRITE” displayed in green on the screen is changed to “WRITE” displayed in red.
c. After the rewrite is complete, “WRITE” displayed in red is changed to “SERVICE” displayed in green.
Sub Service menu
SUB
SERVICE
003
GAISO
000
VARIATION
0
SUB
WRITE
003
GAISO
000
VARIATION
0
SUB
SERVICE
003
GAISO
000
VARIATION
0
SUB
WRITE
003
GAISO
000
VARIATION
0
a
b
Remote Commander
2-3. How to Store Changed Data
SERVICE PANEL
SERVICE PANEL
AZ1 VERSIONUP PROCEDURE(EU)
24
1. When you turn on the set after replacing the Service Panel, the green LED and amber LED may blink if no image and sound are generated.
Even so, insert USB for upgrade into the USB slot on the set while the set is turned on.
2. After inserting USB, the green LED and amber LED blink for a while. The set is reset about minutes later, and then the Standby LED
lights and the Communication LED blinks.
Note: After replacing the Panel, the upgrade startup screen may not appear. In addition, be sure not to remove USB while it is writing.
3. After the writing is complete, the set is rebooted and the screen indicating the upgrade is complete is displayed. Then, remove USB from
the set and press the “Enter” button while the set is turned on.
Ex
trac
trac
t
2-4. How to Upgrade the Version by Using USB
SERVICE PANEL
SERVICE PANEL
Click on the first or last page to see other KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL service manuals if exist.