Sony KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL Service Manual ▷ View online
AZ1 VERSIONUP PROCEDURE(EU)
29
PEM
SERVICE
001 DL
001
001
PRETENDED_ID
0
PEM Service menu
<To set PRETEND_ID in PEM>
1. Press the “2/5” key on the remote commander to select DL.
2. Press the “1/4” key on the remote commander to select PRETEND_ID.
3. Press the “3/6” key on the remote commander to select from 0 to 1.
Note: PRETENDED_ID can only be set in the PEM Model.
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
Press 3: increment
Press 6: decrement
Press 6: decrement
Remote Commander
a
b
c
Note: In order to avoid inconsistencies in Software Versions between
the B* board and TCON board, be sure to rewrite PRETEND_ID.
3-2. How to Change the PEM Settings
T
T
-
-
CON BOARD
CON BOARD
AZ1 VERSIONUP PROCEDURE(EU)
30
1. When you turn on the set after replacing the T-con board, the green LED and amber LED may blink if no image and sound are generated.
Even so, insert USB for upgrade into the USB slot on the set while the set is turned on.
2. After inserting USB, the green LED and amber LED blink for a while. The set is reset about a minute later, and then the Standby LED
lights and the Communication LED blinks.
Note: After replacing the Panel, the upgrade startup screen may not appear. In addition, be sure not to remove USB while it is writing.
3. After the writing is complete, the set is rebooted and the screen indicating the upgrade is complete is displayed. Then, remove USB from
the set and press the “Enter” button while the set is turned on.
Ex
trac
trac
t
3-3. How to Upgrade the Version by Using USB
T
T
-
-
CON BOARD
CON BOARD
AZ1 VERSIONUP PROCEDURE(EU)
31
PEM
SERVICE
004 TCON_CHANGED
000
000
DATA_TRANS_SET
0
<To set DATA_TRANS_SET in PEM>
1. Press the “2/5” key on the remote commander to select TCON_CHANGED.
2. Press the “1/4” key on the remote commander to select DATA_TRANS_SET.
3. Press the “3/6” key on the remote commander to select from 0 to 1.
Note: TCON_CHANGED can only be set in the PEM Model.
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
Press 3: increment
Press 6: decrement
Press 6: decrement
Remote Commander
a
b
c
3-4. How to Change the PEM Settings
PEM Service menu
T
T
-
-
CON BOARD
CON BOARD
AZ1 VERSIONUP PROCEDURE(EU)
32
PEM
SERVICE
004 TCON_CHANGED
001
001
DATA_TRANS_EXE
0
DATA TRANSFER
SUCCESS
Execute data backup from PEM Flash to BL_NVM.
<To set DATA_TRANS_EXE in PEM>
1. Press the “2/5” key on the remote commander to select TCON_CHANGED.
2. Press the “1/4” key on the remote commander to select DATA_TRANS_EXE.
3. Press the “3/6” key on the remote commander to select from 0 to 1.
Note: TCON_CHANGED can only be set in the PEM Model.
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
Press 3: increment
Press 6: decrement
Press 6: decrement
Remote Commander
a
b
c
PEM
SERVICE
004 TCON_CHANGED
001
001
DATA_TRANS_EXE
0
STATUS_SREG 5
DATA TRANSFER NG
3-5. How to Change the PEM Settings
T
T
-
-
CON BOARD
CON BOARD
Click on the first or last page to see other KDL-22PX300 / KDL-32EX403 / KDL-32EX40B / KDL-32EX43B / KDL-32EX500 / KDL-32EX501 / KDL-32EX503 / KDL-32EX504 / KDL-32EX505 / KDL-32EX508 / KDL-32EX603 / KDL-32EX605 / KDL-32EX700 / KDL-32EX701 / KDL-32EX703 / KDL-32EX705 / KDL-32EX706 / KDL-32EX707 / KDL service manuals if exist.