Sony KDF-46E3000 / KDF-50E3000 Service Manual ▷ View online
KDF-46E3000/50E3000
KDF-46E3000/50E3000
13
1-4. HAE BOARD REMOVAL
1-5. HCE BOARD REMOVAL
1 Remove 2 screws for 46” model, 3 screws for 50” model, +BVTP2 4x16
2 Disconnect a connector from HAE board
3 Remove 2 screws for HAE board removal, +BVTP 3x12 TYPE2
2 Disconnect a connector from HAE board
3 Remove 2 screws for HAE board removal, +BVTP 3x12 TYPE2
1 Remove 2 screws for 46” model, 3 screws for 50” model, +BVTP2 4x16
2 Disconnect a connector from HCE board
3 Remove 2 screws for HCE board removal, +BVTP 3x12 TYPE2
2 Disconnect a connector from HCE board
3 Remove 2 screws for HCE board removal, +BVTP 3x12 TYPE2
3
2
Side Control Bracket
HAE Board
1
Side Terminal Bracket
HCE Board
2
1
3
KDF-46E3000/50E3000
KDF-46E3000/50E3000
14
2
A
3
Ornamental Cover
Light Guide
Screen Frame
Rear Cabinet
1
1-6. ORNAMENTAL COVER, SCREEN FRAME, AND LIGHT GUIDE REMOVAL
All of the components of this model can be reached by removing the Screen Frame Assembly from the Rear Cover.
Remove the Side Control Bracket and the Side Terminal Bracket before proceeding. (See 1-4. HAE Board Removal and
1-5. HCE Board Removal.
1-5. HCE Board Removal.
Caution:
When removing the Rear Cover or the Screen Frame Assembly, be sure to clean the mirror and Diffusion Plate(s)
to remove any dust particles.
When removing the Rear Cover or the Screen Frame Assembly, be sure to clean the mirror and Diffusion Plate(s)
to remove any dust particles.
1 Remove 20 screws from the Rear Cabinet to release the Screen Frame, +BVTP2 4x16
2 Slide Ornamental Cover to right and pop off from Screen Frame.
3 Remove 3 screws from Screen Frame, +BVTP2 4x16
2 Slide Ornamental Cover to right and pop off from Screen Frame.
3 Remove 3 screws from Screen Frame, +BVTP2 4x16
A The Light Guide is not included with the Ornamental Cover. When replacing the Ornamental Cover remove 1 screw from
Light Guide, +BVTP 3x12 TYPE2 IT-.
Screen Frame
Rear Cabinet
1
☛
KDF-46E3000/50E3000
KDF-46E3000/50E3000
15
1
Screen Holder
Diffusion Plates
Diffusion Plate
(Lenticular - Front side)
Black Acetate Tape
Diffusion Plate
(Frensnel - Rear side)
Note:
The following diaglam illustrate the taping method when replacing the diffusion Plates.
For Part Numbers refer to the Explode view section of this manual.
The following diaglam illustrate the taping method when replacing the diffusion Plates.
For Part Numbers refer to the Explode view section of this manual.
Screen Frame
1-7. DIFFUSION PLATES AND SCREEN FRAME REMOVAL
Caution:
When replacing the Diffusion Plates be sure to remove any dust particles.
When replacing the Diffusion Plates be sure to remove any dust particles.
1 Remove 5 screws(Top Holder), 6 screws(Bottom Holder) and 3 screws from each side holders, total 17 screws, +BVTP2 4x16
1-7-1. DIFFUSION PLATES (SCREENS) TAPE METHOD
KDF-46E3000/50E3000
KDF-46E3000/50E3000
16
1-8. SEPARATOR, SPEAKER, AND HBE BOARD REMOVAL
1 Remove 9 screws from Separator, +BVTP2 4x16
2 Release connector wires from hook
3 Disconnect joint connectors from HB board
4 Disconnect joint connectors from Speakers
5 Lift tabs and slide out Separator unit.
6 Remove 4 screws from speakers, +BWTP2 4x16
7 Remove 2 screws for HB board removal, +BVTP 3x12 TYPE2 IT-3
2 Release connector wires from hook
3 Disconnect joint connectors from HB board
4 Disconnect joint connectors from Speakers
5 Lift tabs and slide out Separator unit.
6 Remove 4 screws from speakers, +BWTP2 4x16
7 Remove 2 screws for HB board removal, +BVTP 3x12 TYPE2 IT-3
3
4
6
7
5
5
1
2
Rear Cabinet
Separator
Speaker
HBE Board
Click on the first or last page to see other KDF-46E3000 / KDF-50E3000 service manuals if exist.