Sony KDF-46E2000 / KDF-46E2010 / KDF-50E2000 / KDF-50E2010 / KDF-55E2000 / KDF-55E2010 Service Manual ▷ View online
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
41
All these applies for 55”, 46”
For 50”, this starts from MP set #1 (no
need to re-work PP and PVT sets)
need to re-work PP and PVT sets)
LEFT SPEAKER WIRE DRESSING (CONTINUED)
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
42
CAUTION
POINTS
Apply tape on B-Shield to keep
LVDS Connector Assy and 7P
CN3004 Connector on [B] from
being "pinched" when Chassis
is installed into Bottom Block
LVDS Connector Assy and 7P
CN3004 Connector on [B] from
being "pinched" when Chassis
is installed into Bottom Block
Himelon Tape should secure
the (2) connectors coming
from the Ballast, the Fan
connector assy and 3P
Connector Assy from T1
the (2) connectors coming
from the Ballast, the Fan
connector assy and 3P
Connector Assy from T1
ONLY FOR 50" MODELS
Himelon Tape should secure
Duct Block Assy fan
Connector as shown
Duct Block Assy fan
Connector as shown
Connector Assy should be
pulled tight against fan Duct in
order to avoid vibration of wire
against bracket.
pulled tight against fan Duct in
order to avoid vibration of wire
against bracket.
BOTTOM BLOCK ASSEMBLY HIMELON TAPE LOCATION
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
43
After dressing Speaker Wire, HA/HB Connector Assy
and HC Connector assy to Bottom Block.
and HC Connector assy to Bottom Block.
REMOVE as much excess slack in wires and dress to
Purse Lock.
Purse Lock.
Loop Video 2 Connector before installing
into Purse Locak as shown to avoid
Connector assy from Touching [K] Board
Heat Sink.
into Purse Locak as shown to avoid
Connector assy from Touching [K] Board
Heat Sink.
ONLY FOR 46" and 50" models
Ensure no excess wire is hanging loose in
this area.
this area.
THIS IS VERY IMPORTANT TO AVOID
NOISE DUE TO SPEAKER VIBRATION
NOISE DUE TO SPEAKER VIBRATION
Before installing chassis Dress CN3004[B],
CN8400[U], and CN3008[B] to purse lock on
bottom block as shown.
CN8400[U], and CN3008[B] to purse lock on
bottom block as shown.
BOTTOM BLOCK WIRE DRESSING CAUTION POINTS
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
KDF-46E2000/46E2010/50E2000/50E2010/55E2000/55E2010
44
-Install Angled Purse
Lock to C Shield as
shown to the right.
Lock to C Shield as
shown to the right.
-Dress 15P connector
Assy, LVDS Connector
Assy and Optical Block
Fan Connector Assy to
Purse Lock as shown.
Assy, LVDS Connector
Assy and Optical Block
Fan Connector Assy to
Purse Lock as shown.
435591211
PURSE LOCK (DIA. 11)
PURSE LOCK (DIA. 11)
265206401
TAPE, HIMELON (20X40)
TAPE, HIMELON (20X40)
-Apply Himelon to [K]
Board Power Connector
Assy and tape to B
–Shield as shown.
Board Power Connector
Assy and tape to B
–Shield as shown.
-Tape must be placed in
this position to avoid
connector from being
pinched by [U] bracket
when installed.
this position to avoid
connector from being
pinched by [U] bracket
when installed.
CHASSIS WIRE DRESSING CAUTION POINTS
Click on the first or last page to see other KDF-46E2000 / KDF-46E2010 / KDF-50E2000 / KDF-50E2010 / KDF-55E2000 / KDF-55E2010 service manuals if exist.