DOWNLOAD Sony KDF-42E2000 Service Manual ↓ Size: 30.07 MB | Pages: 124 in PDF or view online for FREE

Model
KDF-42E2000
Pages
124
Size
30.07 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdf-42e2000.pdf
Date
PREV: Sony KDL-23S2010 / KDL-26S2010 / KDL-32S2010 / KDL-40S2010 / KDL-46S2010 Service Manual

Sony KDF-42E2000 Service Manual ▷ View online

KDF-42E2000
KDF-42E2000
22
1
2
3
1-9.   SCREEN FRAME ASSEBMLY AND SPEAKER REMOVAL
CAUTION:  When removing the Screen Frame Assembly be sure to clean the Mirror and Diffusion Plate(s) to remove any dust particles.
5
4
1
  Release the wire harness from the purse locks.
2
  Disconnect the CN2500 from the K Board.
3
  Remove 12 screws to detach the Mirror Cover Assembly 
from the Screen Frame Assembly.
4
  Remove 4 screws to detach the Screen Frame Assembly 
from the front bezel.
5
  Gently pull the Screen Frame Assembly forward.
6
  Remove 18 screws from the screen frame to release the 
disfussion plates. Be sure to keep the retaining brackets.
7
  To remove the speakers, remove 2 screws and release the 
speaker wires.
6
7
7
KDF-42E2000
KDF-42E2000
23
1-10. MIRROR ASSEMBLY AND MIRROR COVER ASSEMBLY REMOVAL
4
3
2
1
1
  Remove 4 screws to release the 2 top mirror brackets.
2
  Remove 3 screws to release the mirror holders (46” & 50” 
models only)
3
  Using caution gently lift the mirror up and out of the mirror 
cover. (Slide the mirror up and to one side on the 55” model 
to release it from the mirror holders.)
4
  Remove 4 screws to detach the front of the Mirror Cover 
Assembly from the cabinet. 
5
  Remove 2 screws from back of the cover and then lift the 
Mirror Cover Assembly off of the cabinet.
5
CAUTION:  When removing the Mirror Cover Assembly be sure to clean the Mirror and Diffusion Plate(s) to remove any dust particles.
KDF-42E2000
KDF-42E2000
 24 
 WIRE 
DRESSING
“Top” Lead
“Bottom”
Lead
Dress Lamp Driver Leads as shown
below to wire holders.
After Installing Duct Block assy to
Optical Block Dress “TOP” Lamp Lead
to Purse Lock on [C] Shield
1-910-024-31 Connector Assy should be
dressed around Heat Sink and around Duct
Block Cover as shown above.
Dress "Bottom" Lamp Driver Lead as
shown to wire holder on Duct Block Assy
BALLAST WIRE DRESSING
KDF-42E2000
KDF-42E2000
 25 
1-910-024-31 Connector Assy should be
dressed around Heat Sink and around Duct
Block Cover as shown above.
BALLAST WIRE DRESSING (CONTINUED)
Page of 124
Display

Click on the first or last page to see other KDF-42E2000 service manuals if exist.

RANDOM: