Sony KDF-42E2000 Service Manual ▷ View online
KDF-42E2000
KDF-42E2000
30
x Secure Ring Terminal of 1-910-016-90 to G-Block as shown above.
x Install Faston Terminal to Antenna Switch.
Note: Orientation of ring terminal should be towards the top of the set.
1-910-016-90
OPTICAL BLOCK ASSEMBLY LIGHTNING GROUND POSITION
KDF-42E2000
KDF-42E2000
31
See above for Connector Assy Routing of CN110 [HB]
See above for Connector Assy Routing of CN100 [HA]
SPEAKER GRILL WIRE DRESSING
KDF-42E2000
KDF-42E2000
32
SPEAKER GRILL WIRE DRESSING (CONTINUED)
Dress HA/HB Connector Assy to Wire holder as shown above.
When routing HA/HB Connector Assy through Wire Holder
“RED” tape should be approximately in the position shown
above.
“RED” tape should be approximately in the position shown
above.
KDF-42E2000
KDF-42E2000
33
a
Dress Positive Tab of Speaker wire around speaker bracket
and then Himelon Tape should be installed to secure the wire
as shown.
and then Himelon Tape should be installed to secure the wire
as shown.
Wire Should be pulled so that there is no excess wire.
THIS IS VERY IMPORTANT TO AVOID NOISE DUE TO
SPEAKER VIBRATION
SPEAKER VIBRATION
Tape should wrap around bracket as shown to the right and
securely hold the speaker wire so that it does not move once
the tape is applied.
securely hold the speaker wire so that it does not move once
the tape is applied.
SPEAKER WIRE DRESSING
Click on the first or last page to see other KDF-42E2000 service manuals if exist.