Sony RM-PJVW200 / VPL-VW200 Service Manual ▷ View online
1-33
VPL-VW200
(5) Starting to Upgrade
Fig.11 Firmware Updater - Step3 screen
(6) Upgrade Processing
Fig.12 Firmware Updater - Processing screen
The upgrade process performs the file transfer firstly, and then upgrades the firmware. The end screen automatically
appears after the upgrade is completed.
appears after the upgrade is completed.
Click the [Update] button to
start upgrading.
start upgrading.
1-34
VPL-VW200
(7) Finishing the Update
Fig.13 Firmware Updater - Complete screen
When Network is upgraded
When the upgrade is completed, click [Restart]. The Network block terminates Flash Write Mode and is
rebooted to return to the normal operating condition. When finishing the upgrade without continuing, exit
Firmware Updater by clicking [Finish].
When the upgrade is completed, click [Restart]. The Network block terminates Flash Write Mode and is
rebooted to return to the normal operating condition. When finishing the upgrade without continuing, exit
Firmware Updater by clicking [Finish].
When Sub or Scaler is upgraded
Every time the upgrade for Sub or Scaler is completed, exit Firmware Updater by clicking [Finish], and
then unplug the AC power of the projector and plug it again.
When performing the upgrade consecutively, return to Step 1-4-3.(1) and perform the upgrade.
Every time the upgrade for Sub or Scaler is completed, exit Firmware Updater by clicking [Finish], and
then unplug the AC power of the projector and plug it again.
When performing the upgrade consecutively, return to Step 1-4-3.(1) and perform the upgrade.
n
When a PC with Firewall installed is used
The upgrade may take time due to the block caused by the Firewall function.
In this case, temporarily disable the Firewall function.
When a PC with Firewall installed is used
The upgrade may take time due to the block caused by the Firewall function.
In this case, temporarily disable the Firewall function.
* When performing the upgrade on a PC in which Windows XP SP2 is installed, the upgrade time may be shortened by temporarily
setting “Windows Firewall” to [Unblock].
1-35
VPL-VW200
1-8-4. Event Trace Function
(1) INFORMATION
Clicking the [Event Trace] tab in the Service Web page enables the user to check the following informa-
tion as “INFORMATION”.
. Model Name : Model Name
. Serial No. :
Clicking the [Event Trace] tab in the Service Web page enables the user to check the following informa-
tion as “INFORMATION”.
. Model Name : Model Name
. Serial No. :
Serial number
. Location :
Installation location (The screen displays blank if the location is not specified.)
. ROM Ver. :
The ROM version of Scaler1, Data, Sub, Network.
Fig.14 Event Trace screen
1-36
VPL-VW200
(2) EVENT TRACE
This section describes each items to be displayed.
This section describes each items to be displayed.
TIMER
. Lamp Timer :
. Lamp Timer :
Lamp power-on time
. Operation Timer : Operation time
LAMP TIMER RESET LOG
. OP Timer :
. OP Timer :
Operation time
. Lamp Timer : The lamp power-on time immediately before the timer is reset
ERROR LOG
Displays an error occurrence situation. The past 10 errors are displayed.
. OP timer : The operation time when an error occurs
. Error : Error description
Displays an error occurrence situation. The past 10 errors are displayed.
. OP timer : The operation time when an error occurs
. Error : Error description
LAMP FAILURE :
Lamp error
FAN FAILURE :
Fan error
COVER FAILURE :
Cover error
TEMP FAILURE :
Temperature error
POWER SYSTEM FAILURE 1 :
Power error 1
POWER SYSTEM FAILURE 2 :
Power error 2
TEMP FAILURE :
Temperature error
SYSTEM ERROR :
System error
LAMP/FILTER REPLACE 15H : 15 hours before lamp/filter replacement
LAMP/FILTER REPLACE 50H : 50 hours before lamp/filter replacement
LAMP/FILTER REPLACE 50H : 50 hours before lamp/filter replacement
Click on the first or last page to see other RM-PJVW200 / VPL-VW200 service manuals if exist.