Sony DCR-TRV725E / DCR-TRV730E / DCR-TRV828E / DCR-TRV830E Service Manual ▷ View online
— 9 —
1. MAIN PARTS
Note:
• Follow the disassembly procedure in the numerical order given.
• Items marked “*” are not stocked since they are seldom required for routine service.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
1.
ORNAMENTAL PARTS
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
DCR-TRV725E/TRV730E/
TRV828E/TRV830E
Remote commander (RMT-814)
1-475-141-61
1-475-141-61
Battery case lid
3-742-854-01
3-742-854-01
CPC lid (BT)
3-065-325-01
3-065-325-01
Jack cover (B)
3-065-353-01
3-065-353-01
Jack cover (F)
3-065-352-01
3-065-352-01
Lens cap (N) assembly
X-3949-376-1
X-3949-376-1
MI
screw (M2
×
4) (H)
3-067-347-01
— 10 —
2.
DISASSEMBLY
The following flow chart shows the disassembly procedure.
2-1. LCD unit, PD-139 board (2.5 inch LCD model)
2-2. LCD unit, PD-139 board (3.5 inch LCD model)
2-3. Front panel section, SI-030 board
2-4. Cabinet (R) section
2-6. CF-084 board
2-5. Control switch block (SE-1380), FP-315 board
2-7. EVF section, LB-071 board
2-15. Hinge section
2-8. Lens section, CD-329 board
2-9. MM-043 board
2-10. Battery panel section, Battery terminal board
2-11. Control switch block (SS-1380), FU-155 board
2-12. Cabinet (L) section, Mechanism deck-1
2-14. Mechanism deck-2, MD frame (M)
2-13. VC-262 board
2.5 inch LCD model : DCR-TRV725E/TRV730E
3.5 inch LCD model : DCR-TRV828E/TRV830E
3.5 inch LCD model : DCR-TRV828E/TRV830E
DCR-TRV725E/TRV730E/TRV828E/TRV830E
— 11 —
2-1.
LCD UNIT, PD-139 BOARD (2.5 INCH LCD MODEL)(TRV725E/TRV730E)
NOTE: Follow the disassembly procedure in the numerical order given.
PD-139
Board
9
Screw
(M1.7
×
2.5), p
1
Two
MI
screws
(M2
×
4) (H)
6
Two screws
(M1.7
×
2.5), p
4
P cabinet C (M) assembly
B
0
Two claws
5
qs
P frame (M2),
PD electrostatic sheet (M)
qd
Liquid crystal
indicator module
qz
Remove the PD-139 board
in the direction of the arrow
B
.
REMOVING THE BACK LIGHT
A
qf
Back light
Cold cathode fluorescent tube,
BL shield sheet (N)
BL shield sheet (N)
C
1
Five claws
3
LCD holder (M)
2
Remove the indication LCD (M) block assembly,
back light in the direction of the arrow
C
.
2
Two tapping screws
(M1.7
×
5)
7
Two
MI
screws
(M2
×
4) (H)
8
P cabinet M (M) assembly
3
Four claws
A
— 12 —
2-2.
LCD UNIT, PD-139 BOARD (3.5 INCH LCD MODEL)(TRV828E/TRV830E)
PD-139
Board
2
Two tapping screws
(M1.7
×
5)
1
Two
MI
screws
(M2
×
4) (H)
7
Two
MI
screws
(M2
×
4) (H)
6
Two screws
(M1.7
×
2.5), p
4
P cabinet C (M) assembly
8
P cabinet M (M3) assembly
B
0
Two claws
3
Four claws
5
qd
Liquid crystal
indicator module
qa
Remove the PD-139 board in the
direction of the arrow
B
.
REMOVING THE BACK LIGHT
A
A
qf
Back light
Cold cathode fluorescent tube,
BL shield sheet (N)
BL shield sheet (N)
C
1
Five claws
3
LCD holder (M)
2
Remove the indication LCD (M) block assembly,
back light in the direction of the arrow
C
.
9
Screw
(M1.7
×
2.5), p
qs
P frame (M3),
PD electrostatic sheet (M)
Click on the first or last page to see other DCR-TRV725E / DCR-TRV730E / DCR-TRV828E / DCR-TRV830E service manuals if exist.