Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) Service Manual ▷ View online
77
Advanced Playback Operations
Searching for the date without using Cassette Memory
The POWER switch should be set to
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select CM SEARCH in
(2) Press MENU.
(3) Select CM SEARCH in
, then press EXEC.
(4) Select OFF, then press EXEC.
(5) Press SEARCH MODE on the Remote Commander until the DATE SEARCH
(5) Press SEARCH MODE on the Remote Commander until the DATE SEARCH
indicator appears.
(6) Press . on the Remote Commander to search for the previous date or press
>
on the Remote Commander to search for the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press . or >, your camcorder searches for the previous or next date.
you press . or >, your camcorder searches for the previous or next date.
To cancel searching
Press x on the Remote Commander or
on your camcorder.
Note
If one day’s recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.
If one day’s recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.
If the tape has a blank portion between recorded portions
Date search may not work correctly.
Date search may not work correctly.
Cassette Memory
The cassette with Cassette Memory can hold six recording date data. If you search the
date among seven or more data, see “Searching for the date without using Cassette
Memory.”
The cassette with Cassette Memory can hold six recording date data. If you search the
date among seven or more data, see “Searching for the date without using Cassette
Memory.”
Searching a recording by date – Date search
CM SET
T I TLE
T I TLEERASE
T I TLE DSPL
CM SEARCH
TAPE T I TLE
ERASE ALL
T I TLEERASE
T I TLE DSPL
CM SEARCH
TAPE T I TLE
ERASE ALL
EXIT
RET.
EXEC
ON
OFF
OFF
78
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional).
If you connect with the i.LINK cable (optional), video and audio signals are transmitted
in digital form for high-quality editing.
Titles, screen indicators, Cassette Memory contents, and letters on the “Memory Stick”
index screen cannot be recorded.
a player.
You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional).
If you connect with the i.LINK cable (optional), video and audio signals are transmitted
in digital form for high-quality editing.
Titles, screen indicators, Cassette Memory contents, and letters on the “Memory Stick”
index screen cannot be recorded.
Connecting to the VCR
You can edit on VCRs that support the following systems:
8 mm , Hi8
8 mm , Hi8
, Digital8 , VHS
, S-VHS
, VHSC
, S-VHSC
,
Betamax , ED Betamax
, mini DV
, DV
or MICRO MV
.
Connecting with the A/V connecting cable
Connecting with the i.LINK cable
— Editing —
Dubbing a tape
VIDEO
AUDIO
IN
S VIDEO
S VIDEO
AUDIO/
VIDEO
VIDEO
A/V connecting cable (supplied)
Yellow
White
Red
: Signal flow
VCR
i.LINK
DV Interface
i.LINK cable (optional)
: Signal flow
79
Editing
Dubbing a tape
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
If your VCR has an S VIDEO jack
See page 45 for details.
See page 45 for details.
About the i.LINK connecting
See page 199 for details.
See page 199 for details.
Pictures processed with picture effect, digital effect or PB ZOOM
These are not output through the DV Interface.
These are not output through the DV Interface.
If you connect with the i.LINK cable
You cannot record the picture or the sound separately.
You cannot record the picture or the sound separately.
Dubbing a tape
When connecting with the A/V connecting cable
•Set DISPLAY in
•Set DISPLAY in
to LCD in the menu settings. (The default setting is LCD.)
•Press the following buttons to make the indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DISPLAY/BATT INFO, DATA CODE
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
On your camcorder:
DISPLAY/BATT INFO, DATA CODE
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
The POWER switch should be set to
.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Prepare the VCR for recording. If your VCR has an input selector, set it to the
input mode.
Refer to the operating instructions of the VCR.
Refer to the operating instructions of the VCR.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
(4) Start recording on the VCR.
Refer to the operating instructions of your VCR.
When you have finished dubbing the tape
Press x on both your camcorder and the VCR.
If you record a paused playback picture
•The recorded picture becomes rough with the DV Interface.
•The picture may jitter when you play back the picture using other video equipment.
•The recorded picture becomes rough with the DV Interface.
•The picture may jitter when you play back the picture using other video equipment.
80
You can duplicate selected scenes (programs) for editing onto another tape without
operating the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on a “Memory Stick.” See page 127 for details.
operating the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on a “Memory Stick.” See page 127 for details.
Before operating Digital program editing having the tape
recorded on other equipment
recorded on other equipment
Step 1
Connecting to the VCR.
Step 2
Setting the VCR for operation (p. 81).
Step 3
Adjusting the synchronization of the VCR (p. 84).
When you dub using the same VCR again, you can skip Step 2 and 3.
Using Digital program editing having the tape recorded on
other equipment
other equipment
Operation 1 Making a program (p. 86).
Operation 2 Performing the program (Dubbing on the tape) (p. 88).
Operation 2 Performing the program (Dubbing on the tape) (p. 88).
Note
When editing digital video, the operation signals to the VCR cannot be sent with the
LANC jack.
When editing digital video, the operation signals to the VCR cannot be sent with the
LANC jack.
Step 1: Connecting to the VCR
You can connect either the A/V connecting cable or the i.LINK cable.
Connect the devices as illustrated on page 78.
Connect the devices as illustrated on page 78.
Dubbing only desired scenes
– Digital program editing (on a tape)
– Digital program editing (on a tape)
Unwanted
scene
Unwanted
scene
Switch the order
Click on the first or last page to see other DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) service manuals if exist.