Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) Service Manual ▷ View online
69
Advanced Recording Operations
Turn the LCD panel over and move it back to your camcorder body with the LCD
screen facing out. You can operate with the touch panel using the viewfinder.
Use the viewfinder when operating camera brightness and fader on the touch panel.
screen facing out. You can operate with the touch panel using the viewfinder.
Use the viewfinder when operating camera brightness and fader on the touch panel.
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out.
(2) Press
OFF. The PANEL OFF indicator appears on the screen.
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
OK,
ON and
FADER (only when the POWER switch is set to CAMERA) appear.
(5) Press the LCD screen and select a desired item, then press
OK.
EXPOSURE: Adjust the exposure by pressing –/+.
FADER:
FADER:
Press FADER repeatedly until a desired fader mode appears.
The indicator changes as follows:
The indicator changes as follows:
FADER
t M. FADER t BOUNCE t MONOTONE
(no indicator)
T DOT
T
WIPE
T OVERLAP
ON:
The LCD screen lights up.
To make the buttons on the LCD screen disappear
Press
OK.
Using the viewfinder
When the POWER
switch is set to CAMERA
switch is set to CAMERA
When the POWER
switch is set to MEMORY
switch is set to MEMORY
Viewfinder
4
ON
OK
EXPO–
SURE
EXPO–
SURE
OK
ON
FADER
70
Using the viewfinder
Note
When the POWER switch is set to VCR or during memory playback, you cannot
operate with the touch panel using the viewfinder.
When the POWER switch is set to VCR or during memory playback, you cannot
operate with the touch panel using the viewfinder.
To operate the items that do not appear
Set the LCD panel back to the normal position. Operate the items using the LCD screen.
Set the LCD panel back to the normal position. Operate the items using the LCD screen.
Available recording time
This is the time when you record pictures using the viewfinder (p. 17).
This is the time when you record pictures using the viewfinder (p. 17).
71
Advanced Playback Operations
The POWER switch should be set to
.
Operate by touching the panel.
(1) During playback or playback pause, press FN to display PAGE1.
(2) Press MENU.
(3) Select P EFFECT in
(2) Press MENU.
(3) Select P EFFECT in
, then press EXEC.
(4) Select a desired mode, then press EXEC.
You can use NEG. ART, SEPIA, B&W and SOLARIZE.
See page 55 for details on each mode.
See page 55 for details on each mode.
To return to FN
Press EXIT.
To cancel picture effect
Set P EFFECT to OFF.
Notes
•You cannot process externally input scenes using picture effect.
•You cannot record images processed with picture effect on the tape on your
•You cannot process externally input scenes using picture effect.
•You cannot record images processed with picture effect on the tape on your
camcorder. Record the processed images on the “Memory Stick” (p. 116, 125), or on a
VCR using your camcorder as a player.
VCR using your camcorder as a player.
Pictures processed with picture effect
Pictures processed with picture effect are not output through the DV Interface.
Pictures processed with picture effect are not output through the DV Interface.
— Advanced Playback Operations —
Playing back a tape with picture effect
MANUAL SET
P EFFECT
EXIT
RET.
EXEC
OFF
NEG. ART
SEPIA
B&W
SOLARIZE
NEG. ART
SEPIA
B&W
SOLARIZE
72
The POWER switch should be set to
.
Operate by touching the panel.
(1) During playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Select a desired mode. You can use STILL, FLASH, LUMI. and TRAIL.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Select a desired mode. You can use STILL, FLASH, LUMI. and TRAIL.
See pages 56, 57 for details on each mode. When you select STILL or LUMI.,
the picture where you select the mode is stored in memory as a still image.
the picture where you select the mode is stored in memory as a still image.
(4) Press –/+ to adjust the effect.
(5) Press
(5) Press
OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel digital effect
Press
OFF to return to PAGE2.
Notes
• You cannot process externally input scenes using digital effect.
• You cannot record images processed with digital effect on the tape on your
• You cannot process externally input scenes using digital effect.
• You cannot record images processed with digital effect on the tape on your
camcorder. Record the processed images on the “Memory Stick” (p. 116, 125), or on a
VCR using your camcorder as a player.
VCR using your camcorder as a player.
Pictures processed with digital effect
Pictures processed with digital effect are not output through the DV Interface.
Pictures processed with digital effect are not output through the DV Interface.
Playing back a tape with digital effect
2
DIG
EFFT
EFFT
OK
OFF
STILL
FLASH
LUMI.
TRAIL
DIG EFFT
Click on the first or last page to see other DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) service manuals if exist.