Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) Service Manual ▷ View online
29
Recording – Basics
Shooting with the mirror mode
This feature allows the camera subject to view him- or herself on the LCD screen.
The subject uses this feature to check his or her own image on the LCD screen while you
look at the subject in the viewfinder.
The subject uses this feature to check his or her own image on the LCD screen while you
look at the subject in the viewfinder.
(1) Extend the viewfinder.
(2) Rotate the LCD panel 180 degrees.
(2) Rotate the LCD panel 180 degrees.
Picture in the mirror mode
The picture on the LCD screen is a mirror-image. However, the picture will be normal
when recorded.
The picture on the LCD screen is a mirror-image. However, the picture will be normal
when recorded.
Recording a picture
2
1
30
Adjusting the brightness of the LCD screen
(1) When the POWER switch is set to CAMERA, press FN and select PAGE2.
When the POWER switch is set to VCR, press FN to display PAGE1.
When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only), press
FN and select PAGE3.
When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only), press
FN and select PAGE3.
(2) Press LCD BRT. The screen to adjust the brightness of the LCD screen appears.
(3) Adjust the brightness of the LCD screen using – (to dim)/+ (to brighten).
(4) Press
(3) Adjust the brightness of the LCD screen using – (to dim)/+ (to brighten).
(4) Press
OK to return to PAGE1/PAGE2/PAGE3 in Step 1.
To return to FN
Press EXIT.
LCD screen backlight
You can change the brightness of the backlight when using the battery pack. Select LCD
B.L. in
You can change the brightness of the backlight when using the battery pack. Select LCD
B.L. in
in the menu settings (p. 178).
Even if you adjust LCD BRT or LCD B.L.
The recorded picture will not be affected.
The recorded picture will not be affected.
Shooting using the viewfinder is recommended when:
•You cannot see the picture clearly on the LCD screen.
•You want the battery pack to last longer.
•You cannot see the picture clearly on the LCD screen.
•You want the battery pack to last longer.
Recording a picture
2,3
LCD
BRT
BRT
LCD BRT
OK
The bar indicator
31
Recording – Basics
Adjusting the viewfinder
If you record pictures with the LCD panel closed, check the picture with the viewfinder.
Adjust the viewfinder lens to your eyesight so that the images in the viewfinder come
into sharp focus.
Adjust the viewfinder lens to your eyesight so that the images in the viewfinder come
into sharp focus.
Extend the viewfinder and move the viewfinder lens adjustment lever.
Viewfinder backlight
You can change the brightness of the backlight when using the battery pack. Select VF
B.L. in
You can change the brightness of the backlight when using the battery pack. Select VF
B.L. in
in the menu settings (p. 178).
Even if you adjust VF B.L.
The recorded picture will not be affected.
The recorded picture will not be affected.
The camera recording lamp (DCR-TRV19 only)
The camera recording lamp lights up in the viewfindrer during recording.
The camera recording lamp lights up in the viewfindrer during recording.
Recording a picture
Viewfinder lens
adjustment lever
adjustment lever
32
Using the zoom feature
Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom sparingly results in better-looking recordings.
Using the zoom sparingly results in better-looking recordings.
W : Wide-angle (subject appears farther away)
T : Telephoto (subject appears closer)
To use zoom greater than 10
×
Zoom greater than 10
×
is performed digitally. Digital zoom can be set to 20
×
or 120
×
.
To activate digital zoom, select the digital zoom power in D ZOOM in
in the menu
settings (p. 177). The digital zoom is set to OFF as the default setting. Because the
picture is processed digitally, the picture quality deteriorates.
picture is processed digitally, the picture quality deteriorates.
When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 5/8 feet)
away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch)
away in the wide-angle position.
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 5/8 feet)
away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch)
away in the wide-angle position.
When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only)
You cannot use the digital zoom.
You cannot use the digital zoom.
Recording a picture
T
W
T
W
The right side of the bar shows the digital zooming
zone.
The digital zooming zone appears when you select
the digital zoom power in the menu settings.
zone.
The digital zooming zone appears when you select
the digital zoom power in the menu settings.
T
W
Click on the first or last page to see other DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) service manuals if exist.