DOWNLOAD Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) Service Manual ↓ Size: 5.63 MB | Pages: 127 in PDF or view online for FREE

Notes
• The BATTERY INFO indicator may not be displayed in the following cases:

– The battery pack is not installed.
– Something is wrong with the battery pack.
– The battery is exhausted.

• The BATTERY INFO indicator will not appear when you press DISPLAY on the

Remote Commander when the POWER switch is set to OFF (CHG).

Battery Info
The number displayed as Battery Info is the approximate recording time.

While the remaining battery time is being calculated
“CALCULATING BATTERY INFO ...” is displayed.

If you press DSPL/BATT INFO with the LCD panel closed
The battery information appears on the viewfinder for about 7 seconds.

You can use your camcorder without worrying about the power shortage.
Connect the AC Adaptor in the same way as you would when charging the battery
pack.

PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.

Notes
• The AC Adaptor can supply power from a wall outlet even if the battery pack is

attached to your camcorder.

• The DC IN jack has “source priority.” This means that the battery pack cannot supply

any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.

Set the date and time when you use your camcorder for the first time. The “CLOCK
SET” indicator will appear each time you set the POWER switch to CAMERA or
MEMORY (DCR-TRV22/TRV33 only) unless you set the date and time settings.
If you do not set the date and time, “--- -- ----” and “--:--:--” are recorded on the tape or
the “Memory Stick” (DCR-TRV22/TRV33 only) as the data code.
If you do not use your camcorder for about 4 months

, the date and time settings may

be released (bars may appear) because the built-in rechargeable battery installed in your
camcorder will have been discharged (p. 207). In this case, charge the built-in
rechargeable battery, then set the year, the month, the day, the hour and the minute.

(1) Set the POWER switch to CAMERA or MEMORY (DCR-TRV22/TRV33 only).
(2) Press OPEN to open the LCD panel.
(3) Press FN (Function) to display PAGE1 (p. 23).
(4) Press MENU to display the menu.
(5) Press r/R to select 

, then press EXEC.

(6) Press r/R to select CLOCK SET, then press EXEC.
(7) Press r/R to select a desired year, then press EXEC.
(8) Set the month, day and hour with the same procedure as step 7.
(9) Press r/R to set the minute, then press EXEC by the time signal. The clock

starts to move.

Press EXIT.

Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.

FN

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

– – : – – : – –

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

 2003  JAN    1

12  00 AM

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

 2003  JAN    1

12  00 AM

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

2003 JUL    4

  5 00 PM

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

JUL   4 2003

   5:30:00

PM  

SETUP  MENU

CLOCK  SET
USB STREAM
LANGUAGE
DEMO  MODE

EXIT

RET.

EXEC

2003 JUL    4

  5 30 PM

Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger to operate each function.

(1) Set the POWER switch to CAMERA to record, VCR to play back, or MEMORY

to use the “Memory Stick” (DCR-TRV22/TRV33 only).

(2) Press OPEN to open the LCD panel.
(3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen.
(4) Press PAGE2/PAGE3 to display PAGE2/PAGE3. Operation buttons on

PAGE2/PAGE3 are displayed on the LCD screen.

(5) Press a desired operation item. See relevant pages of this manual for each

function.

Press EXIT.

Press 

 OK. The display returns to PAGE1/PAGE2/PAGE3.

Press 

 OFF. The display returns to PAGE1/PAGE2/PAGE3.

Press DSPL/BATT INFO.

SPOT

METER

MENU

SPOT

FOCUS

FADER

FOCUS

END
SCH

EXPO-

SURE

PAGE1 PAGE2

EXIT

When the POWER switch
is set to CAMERA

PAGE1

SPOT FOCUS, MENU, FOCUS, FADER, END SCH, SPOT METER,
EXPOSURE

PAGE2

DIG EFFT*, SELFTIMER, LCD BRT, SUPER NS*, VOL, COLOR SLW S*,
MEM MIX*

* DCR-TRV22/TRV33 only

PAGE1

MENU, LCD BRT, VOL, END SCH

PAGE2

DATA CODE, DIG EFFT*, PB ZOOM*

PAGE3

V SPD PLAY, A DUB CTRL, REC CTRL

* DCR-TRV22/TRV33 only

When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only)
During memory camera

PAGE1

SPOT FOCUS, MENU, FOCUS, PLAY, PB FOLDR, SPOT METER,
EXPOSURE

PAGE2

SELFTIMER, PLAY, MEM MIX

PAGE3

LCD BRT, PLAY, VOL

During memory playback

PAGE1

MENU, CAM, PB FOLDR, DEL

PAGE2

PB ZOOM, CAM, RESIZE*, DATA CODE

PAGE3

LCD BRT, CAM, VOL

* DCR-TRV33 only

Notes
•When using the touch panel, press operation buttons lightly with your finger

supporting the LCD panel from the back side of it.

•Do not press the LCD screen with sharp objects such as a pen.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You

can control the display with DSPL/BATT INFO on your camcorder.

When executing each item
The green bar appears above the item.

If the items are not available
The color of the items changes to gray.

When using the viewfinder
You can also operate with the touch panel (p. 70).