DOWNLOAD Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) Service Manual ↓ Size: 5.63 MB | Pages: 127 in PDF or view online for FREE

If the equipment to be connected has an S video jack
•Pictures can be reproduced more faithfully by using an S video cable (optional). With

this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable. However, you need to connect the red and white (audio) plugs.
Connect the S video cable (optional) to the S video jacks on both your camcorder and
the TV or the VCR.
This connection produces higher quality DV format pictures.

•There is no sound output when connecting only with an S video cable (optional).

To display the screen indicators on TV
Set DISPLAY in 

 to V-OUT/LCD in the menu settings (p. 184). To make the screen

indicators disappear, press DSPL/BATT INFO on your camcorder.

Insert a “Memory Stick” before the following operation.

The POWER switch should be set to 

.

(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE

indicator appears. Recording does not start yet. To change the still image,
release PHOTO, select a still image again, and then press and hold PHOTO
lightly.

(2) Press PHOTO deeply.

Recording is complete when the bar scroll indicator at the upper right on the
screen disappears.
The image displayed on the screen when you pressed PHOTO deeply will be
recorded on the “Memory Stick.”

The POWER switch should be set to 

.

Press PHOTO deeply.
The image displayed on the screen when you pressed PHOTO deeply will be recorded
on the “Memory Stick.”
Recording on the “Memory Stick” is complete when the bar scroll indicator disappears.

FN

FINE

640

50

min

FN

12      

CAPTURE

FINE

640

50

min

101

101

Note
You cannot record still images in the “Memory Stick” during the following operations
(The 

 indicator flashes):

– End search
– Wide mode
– During BOUNCE is on
– MEMORY MIX

“Memory Stick”
See page 106 for details.

Still images
• The image size will be 640 

×

 480.

• If the POWER switch is set to CAMERA, image quality cannot be changed. Images

will be recorded with image quality as set when the POWER switch is set to
MEMORY.

• When recording with higher image quality, use of memory photo recording is

recommended.

During and after recording still images on the “Memory Stick”
Your camcorder continues recording on the tape.

When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.

To record still images on the “Memory Stick” during tape recording
You cannot check an image on the screen by pressing PHOTO lightly. The image when
you press PHOTO deeply will be recorded on the “Memory Stick.”

Title
You cannot record the titles.

Self-timer recording
During recording standby, you can record still images on the “Memory Stick” with the
self-timer. See page 50 for details.

You can record still images such as photographs. You can record about 510 images in
the SP mode and about 765 images in the LP mode on a 60-minute tape.

The POWER switch should be set to 

.

(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE

indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.

(2) Press PHOTO deeply.

The still image displayed on the screen when you pressed PHOTO deeply is
recorded for about 7 seconds. The sound during those 7 seconds is also
recorded.
The still image is displayed on the screen until the recording is completed.

Notes
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. The image may fluctuate.
•The tape photo recording function does not work when the fader function is on.

CAPTURE

FN

•••••••

FN