Sony DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) Service Manual ▷ View online
6-36
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-9.
LCD SYSTEM ADJUSTMENTS
1.
Function of Each Button on LCD System Adjust-
ment Screen
ment Screen
Click the [LCD SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-17 will appear.
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-17 will appear.
Fig. 6-1-17
2
1
Block
Page
Address
VCO Adj.
10
60
1050 (NTSC model),
1051 (PAL model)
1051 (PAL model)
Contrast Adj.
10
60
1058
V-COM Adj.
10
60
1052
Transmissive Mode White Balance Adj.
10
60
1056, 1057
Reflective Mode White Balance Adj.
10
60
107B, 107C
Touch Panel
Adjustment
Adjustment
Touch Panel Adj.
Adjusting Address
Note:
The adjustment data cannot be read or written from the SeusEX.
(Note)
Button Name
Adjustment
LCD
Adjustment
Adjustment
Table 6-1-7
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Start] button
Each adjustment “LCD Adjustment” or “Touch Panel Adjust-
ment” starts.
Each adjustment “LCD Adjustment” or “Touch Panel Adjust-
ment” starts.
2.
Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-7. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Table 6-1-7. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
6-37
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
4) If the [End] button is clicked, the following screen is displayed
during the execution of “4. Transmissive Mode White Balance
Adj.”. Check that the LCD screen is not colored. If colored,
using the [Up]/[Down] button on the screen, adjust so that the
LCD screen is not colored. After the adjustment, click the [End]
button in the screen.
Adj.”. Check that the LCD screen is not colored. If colored,
using the [Up]/[Down] button on the screen, adjust so that the
LCD screen is not colored. After the adjustment, click the [End]
button in the screen.
5) If the [End] button is clicked, “5. Reflective Mode White Bal-
ance Adj.” will be executed.
6) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the [OK] button.
3.
LCD Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. LCD Automatic Adj.
sequence]
1. Data Setting during LCD Adj.
2. LCD Automatic Adj.
(VCO Adj., Contrast Adj.)
3. V-COM Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj.
[Adjusting method]
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during LCD Adj.” and “2. LCD Automatic Adj.”.
3) After that, the following screen is displayed during the execu-
tion of “3. V-COM Adj.”. Using the [Up]/[Down] button on the
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the [End] but-
ton in the screen.
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the [End] but-
ton in the screen.
6-38
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
4.
Touch Panel Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Touch Panel Adj.
sequence]
1. Touch Panel Adj.
[Adjusting method]
1) Click the [Start] button of the Touch Panel Adjustment.
2) The Automatic Adjustment Program executes the “1. Touch
1) Click the [Start] button of the Touch Panel Adjustment.
2) The Automatic Adjustment Program executes the “1. Touch
Panel Adj.1”. The following message is displayed, and then
adjust the LCD screen in accordance with the instructions given
on the screen. After the adjustment, click the [OK] button in
the message window.
adjust the LCD screen in accordance with the instructions given
on the screen. After the adjustment, click the [OK] button in
the message window.
3) Upon successful completion of all item the Touch Panel Ad-
justment, the following message is displayed. Click the [OK]
button.
button.
6-39
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-10. ERROR
In the case of an error during the execution of adjustment, the
Automatic Adjustment Program interrupts the processing at that
point, and displays an error message, and then terminates the pro-
gram execution there.
Automatic Adjustment Program interrupts the processing at that
point, and displays an error message, and then terminates the pro-
gram execution there.
1-10-1. Error Message
When an error message is displayed, perform the remedy given
below, and then retry adjustment. If the error message is displayed
though the remedy was performed, the circuits will be faulty.
below, and then retry adjustment. If the error message is displayed
though the remedy was performed, the circuits will be faulty.
1.
Connect Error, Adjust Control Error
Fig. 6-1-18
Symptom
USB communication with the set is abnormal.
Cause
• USB cable is not inserted tightly.
• Power supply is not installed correctly.
• Communication with SeusEX is abnormal.
Remedy
• Disconnect the USB cable once, and then re-
connect it tightly and check that the set is in
“USB Mode”.
“USB Mode”.
• Install the power supply correctly.
• Start the SeusEX and click the [Connect] to
check that the connection state is established.
2.
RESET the CAMERA and Try Again
Fig. 6-1-19
Symptom
The camera is not ready for adjustment.
Cause
Data error exists in the camera.
Remedy
Reset the camera.
3.
Adjustment Time Out
Fig. 6-1-20
Symptom
Adjustment does not finish within the specified
time.
time.
Cause
• Adjustment conditions are wrong.
• Data error exists in the camera.
Remedy
• Check that the conditions such as a subject
are correct.
• Reset the camera.
4.
Adjustment NG
Fig. 6-1-21
Symptom
The adjusted data does not become the speci-
fied value.
fied value.
Cause
• Adjustment conditions are wrong.
• Data error exists in the camera.
Remedy
• Check that the conditions such as a subject
are correct.
• Reset the camera.
This part indicates
the adjustment
item in which
an error occurred.
the adjustment
item in which
an error occurred.
This part indicates
the adjustment
item in which
an error occurred.
the adjustment
item in which
an error occurred.
Click on the first or last page to see other DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) service manuals if exist.