Sony DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) Service Manual ▷ View online
6-16
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
4) After that, the following screen is displayed during the execu-
tion of “3. S VIDEO OUT Chroma Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.
5) If the [End] button is clicked, “4. VIDEO OUT Level Check”
will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
6) Upon successful completion of all item the VIDEO Adjust-
ment, the following message is displayed. Click the [OK] but-
ton.
ton.
6-17
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-7.
CAMERA SYSTEM ADJUSTMENTS
(Non MEGA model)
(Non MEGA model)
1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-11 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-11 will appear.
Fig. 6-1-11
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 6” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 6” starts.
4
Model Select radio button
Selects the model to be adjusted.
Selects the model to be adjusted.
Note:
NTSC model: DCR-SR45/SR46
PAL model: DCR-SR35E/SR36E/SR45E/SR46E
PAL model: DCR-SR35E/SR36E/SR45E/SR46E
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
5
3
2
1
2
3
3
3
4
6-18
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
2.
Adjustment Items of Camera System Adjustment
The adjustment items of camera system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program divides the ad-
justment items into six, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-5. The Automatic Adjustment Program divides the ad-
justment items into six, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-5
Block
Page
Address
CAMERA
Adjustment 1
Adjustment 1
HALL Adj.
Not required
11
61
0150 to 0159,
0190 to 019B
0190 to 019B
Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig
minipattern box (Note) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away
subject more than 500 m away
CAMERA
Adjustment 3
Adjustment 3
Flange Back Check
Siemens star chart
-
-
-
F No. Standard Data Input
11
61
0160 to 017F
MAX GAIN Adj.
11
61
015C to 015F
Color Reproduction Adj.
11
61
0060 to 006E
Color Reproduction Check
-
-
-
AWB & LV Standard Data Input
Clear chart
(All White frame)
(All White frame)
11
61
0074 to 007B,
0180 to 018B,
01C0 to 01C3
0180 to 018B,
01C0 to 01C3
AWB Adj.
Clear chart
(All White frame)
Filter C14 for color temperature
correction
(All White frame)
Filter C14 for color temperature
correction
11
61
0070 to 0073,
008C to 0093,
01C4 to 01C7
008C to 0093,
01C4 to 01C7
AWB Check
Clear chart
(All White frame)
ND filter 1.0, 0.4 and 0.1
(All White frame)
ND filter 1.0, 0.4 and 0.1
-
-
-
CAMERA
Adjustment 6
Adjustment 6
Black Defect Adj.
Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)
(Shoot the clear chart with the zoom
TELE end.)
11
61
00C0 to 011D,
01A0 to 01B3
01A0 to 01B3
Subject
Adjustment
Button Name
Adjusting Address
Note:
Dark Siemens star chart.
61
11
CAMERA
Adjustment 2
Adjustment 2
Flange Back Adj.
Clear chart
(Center frame)
(Center frame)
CAMERA
Adjustment 4
Adjustment 4
CAMERA
Adjustment 5
Adjustment 5
Color bar chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
0020 to 0030,
004C, 004D
004C, 004D
6-19
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
3.
CAMERA Adjustment 1
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) If “1. Data Setting during Camera Adj.” completed success-
fully, and the items “2. HALL Adj.” and “3. Release of Data
Setting during Camera Adj.” will be executed.
Setting during Camera Adj.” will be executed.
4) Upon successful completion of all items of the CAMERA
Adjustment 1, the following message is displayed. Click the
[OK] button.
[OK] button.
Click on the first or last page to see other DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) service manuals if exist.