Sony DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) Service Manual ▷ View online
6-8
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-3.
HDD SYSTEM ADJUSTMENTS
When the HDD is replaced, the following VBScript files are used.
The Automatic Adjustment Program (DCR-SR45 Series Auto-Adj
Ver_1.[]r[][].exe or DCR-SR65 Series Auto-Adj Ver_1.[]r[][].exe)
is not used.
• CheckHDDError_After2008.vbe
• Set ClipSectorCountSys_After2008.vbe
• SetFactoryCheckDefault_After2008.vbe
• SetFactoryCheckFull_After2008.vbe
• ExecAfterFactoryCheck_2008.vbe
The Automatic Adjustment Program (DCR-SR45 Series Auto-Adj
Ver_1.[]r[][].exe or DCR-SR65 Series Auto-Adj Ver_1.[]r[][].exe)
is not used.
• CheckHDDError_After2008.vbe
• Set ClipSectorCountSys_After2008.vbe
• SetFactoryCheckDefault_After2008.vbe
• SetFactoryCheckFull_After2008.vbe
• ExecAfterFactoryCheck_2008.vbe
For the VBScript files ([][][][][][][].vbe), the program is executed
by double-clicking the file.
by double-clicking the file.
Note 1:
The VBScript files can only be used on the PC in which
the SeusEX is installed.
the SeusEX is installed.
Note 2:
The VBScript file to be used must include 2008 in the
file name.
file name.
6-9
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
Message is checked.
When message is
“No Error”
“No Error”
When message is
“Error Detected”
“Error Detected”
Connect the camcorder to the PC
with a USB cable, and turn on the
power switch.
with a USB cable, and turn on the
power switch.
The USB SELECT menu will appear
on the LCD screen of the camcorder,
and the select “USB CONNECT” to
establish the connection.
on the LCD screen of the camcorder,
and the select “USB CONNECT” to
establish the connection.
Execte the “CheckHDDError_After2008.vbe”.
(Double-click the file.)
(Double-click the file.)
Execte the
“SetClipSectorCountSys_After2008.vbe”.
(Double-click the file.) (Note 1, 2)
“SetClipSectorCountSys_After2008.vbe”.
(Double-click the file.) (Note 1, 2)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Replacing the HDD is unneccessary.
Start
End
A
B
(See page 6-10)
(See page 6-10)
Is the VC board replaced?
Yes
No
1.
HDD Replacement Procedure
Note 1:
30GB: DCR-SR35E/SR45/SR45E
40GB: DCR-SR36E/SR46/SR46E/SR55E/SR65/SR65E
60GB: DCR-SR75E/SR85/SR85E
40GB: DCR-SR36E/SR46/SR46E/SR55E/SR65/SR65E
60GB: DCR-SR75E/SR85/SR85E
Note 2:
Select correct capacity and retry, if the HDD capacity
setting was wrong.
setting was wrong.
6-10
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
Note:
During the execution of Factory Check, the LCD screen of
the camcorder becomes gray, and the ACCESS lamp be-
comes dark and light.
When the Factory Check finished, the LCD screen changes
as follows:
the camcorder becomes gray, and the ACCESS lamp be-
comes dark and light.
When the Factory Check finished, the LCD screen changes
as follows:
When Factory Check is OK: Camera image display
When Factory Check is NG: Blue display
When Factory Check is NG: Blue display
Is replacement HDD new one?
No
Reused HDD
Reused HDD
Yes
New HDD
New HDD
Turn off the power of camcorder.
Turning on the power of camcorder
will start automatic Factory Check.
Wait until Factory Check completed. (Note)
[EST. PROCESS TIME]
Default: 6 min.
Full:
Full:
30GB About 1 hour 52 min.
40GB About 2 hour 36 min.
60GB About 3 hour 36 min.
40GB About 2 hour 36 min.
60GB About 3 hour 36 min.
Replace the HDD.
Execte the
“SetFactoryCheckDefault_After2008.vbe”.
(Double-click the file.)
“SetFactoryCheckDefault_After2008.vbe”.
(Double-click the file.)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Wait until “JOB Success”
message is displayed.
(several seconds)
message is displayed.
(several seconds)
Execte the
“SetFactoryCheckFull_After2008.vbe”.
(Double-click the file.)
“SetFactoryCheckFull_After2008.vbe”.
(Double-click the file.)
Execte the
“ExecAfterFactoryCheck_2008.vbe”.
(Double-click the file.)
“ExecAfterFactoryCheck_2008.vbe”.
(Double-click the file.)
B
A
(See page 6-9)
(See page 6-9)
6-11
DCR-SR35E/SR36E/SR45/SR45E/SR46/SR46E/
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
SR55E/SR65/SR65E/SR75E/SR85/SR85E_ADJ
1-4.
DESTINATION DATA WRITE
Note:
The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-7 will appear.
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-7 will appear.
Fig. 6-1-7
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Model Name List
Selects the model name.
Selects the model name.
3
Destination List
Selects the written destination.
Selects the written destination.
4
[Data Write] button
Write the destination data to the camcorder.
Write the destination data to the camcorder.
5
[Destination Check] button
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
2.
Destination Data Write
[Writing method]
1) Select the model name from the pulldown list.
1) Select the model name from the pulldown list.
2) Select the target destination from the pulldown list.
3) Click the [Data Write] button.
4) Following message will be appeared after completing data
writing.
5) After the destination data writing completed, click the [Desti-
nation Check] button to check the destination.
3
2
4
1
5
Click on the first or last page to see other DCR-SR35E / DCR-SR36E / DCR-SR45 / DCR-SR45E / DCR-SR46 / DCR-SR46E / DCR-SR55E / DCR-SR65 / DCR-SR65E / DCR-SR75E / DCR-SR85 / DCR-SR85E (serv.man4) service manuals if exist.