Sony DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man4) Service Manual ▷ View online
6-7
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
H
A=B
C=D
A B
B
C
D
A
Enlargement
V
Electronic beam scanning frame
CRT picture frame
B
A
Difference in level
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Color bar chart (Color reproduction adjustment frame)
Fig. a
(VIDEO terminal of A/V jack
output waveform)
(VIDEO terminal of A/V jack
output waveform)
Fig. b (monitor TV picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
1-1-2.
Precaution
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments without inserting disc.
1. POWER switch ............................................................. Movie
2. BACK LIGHT .................................................................. OFF
3. PROGRAM AE (MENU setting) ................................. AUTO
4. EXPOSE (MENU setting) ............................................ AUTO
5. WHITE BAL. (MENU setting) .................................... AUTO
6. FOCUS (MENU setting) .............................................. AUTO
2. BACK LIGHT .................................................................. OFF
3. PROGRAM AE (MENU setting) ................................. AUTO
4. EXPOSE (MENU setting) ............................................ AUTO
5. WHITE BAL. (MENU setting) .................................... AUTO
6. FOCUS (MENU setting) .............................................. AUTO
7. COLOR SLOW S (MENU setting) ................................. OFF
8. DIGITAL ZOOM (MENU setting) ................................. OFF
9. STEADY SHOT (MENU setting) ................................... OFF
10. DIGITAL EFFECT (MENU setting) .............................. OFF
11. PICTURE EFFECT (MENU setting) .............................. OFF
12. DEMO MODE (MENU setting) ..................................... OFF
8. DIGITAL ZOOM (MENU setting) ................................. OFF
9. STEADY SHOT (MENU setting) ................................... OFF
10. DIGITAL EFFECT (MENU setting) .............................. OFF
11. PICTURE EFFECT (MENU setting) .............................. OFF
12. DEMO MODE (MENU setting) ..................................... OFF
Fig. 6-1-4
3.
Subjects
1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
2) Clear chart (AWB adjustment frame)
Shoot the color bar chart. Then adjust the zoom to TELE side
from WIDE side, and stop it when the black frame of the chart
disappears. Remove the color bar chart from pattern box and
insert a clear chart in its place.
from WIDE side, and stop it when the black frame of the chart
disappears. Remove the color bar chart from pattern box and
insert a clear chart in its place.
3) Chart for flange back adjustment
Join together a piece of white A0 size paper (1189 mm
× 841
mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.
Fig. 6-1-5.
Note:
Use a non-reflecting and non-glazing vellum paper. The
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
Fig. 6-1-5
Black
White
841 mm
1189 mm
2.
Order of Adjustments
Basically carry out adjustments in the order given.
6-8
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
5.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-6
1
[Connecting the Equipment] button
A connection diagram of the equipment is displayed.
A connection diagram of the equipment is displayed.
2
[CONNECT] button
The mode of Camcorder is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 - qa is enabled.
The mode of Camcorder is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 - qa is enabled.
3
[END] button
The mode of Camcorder is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
The mode of Camcorder is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
4
[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.
The “DESTINATION DATA WRITE” screen appears.
5
[USB SERIAL No. INPUT] button
The “USB SERIAL No. INPUT” screen appears.
The “USB SERIAL No. INPUT” screen appears.
6
[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
7
[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
8
[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.
The “LCD SYSTEM ADJUSTMENT” screen appears.
9
[SERVICE MODE] button
The “SERVICE MODE” screen appears.
The “SERVICE MODE” screen appears.
q;
[DATA BACKUP] button
The “DATA BACKUP” screen appears.
The “DATA BACKUP” screen appears.
qa
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
1-2.
ADJUSTMENT PROGRAM
The DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/
SR62E/SR72E/SR82/SR82C/SR82E are adjusted by the Automatic
Adjustment Program. The Automatic Adjustment Program enters
automatically via the SeusEX the adjustment operations that were
formerly entered manually by the adjustment remote commander
(some items may be adjusted by manual operation on the opera-
tion screen of the SeusEX).
SR62E/SR72E/SR82/SR82C/SR82E are adjusted by the Automatic
Adjustment Program. The Automatic Adjustment Program enters
automatically via the SeusEX the adjustment operations that were
formerly entered manually by the adjustment remote commander
(some items may be adjusted by manual operation on the opera-
tion screen of the SeusEX).
1.
Precautions When Using Automatic Adjustment
Program
Program
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camcorder via the SeusEX. Accordingly, the
Automatic Adjustment Program must be used in the environ-
ment where the SeusEX operates.
cation with the camcorder via the SeusEX. Accordingly, the
Automatic Adjustment Program must be used in the environ-
ment where the SeusEX operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS or the SeusCam is running. Exit the SEUS or the
SeusCam before using the Automatic Adjustment Program.
SeusCam before using the Automatic Adjustment Program.
3) The SeusEX must be already started on the PC when using the
Automatic Adjustment Program. With the SeusEX not started,
some adjustment items will take time in adjustment.
some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
2.
Program Files (Non MEGA model)
If the file compressed in ZIP format (DCR-SR42 Series Auto-Adj
Ver_1.7r07.zip) is decompressed, the following files will be ex-
panded:
Ver_1.7r07.zip) is decompressed, the following files will be ex-
panded:
When the application file (DCR-SR42 Series Auto-Adj
Ver_1.7r07.exe) of automatic adjustment program is moved/cop-
ied, be sure to move/copy the ColorReproductionAdj folder and
the file (GlColorReproductionAdjustment.exe) in the folder to-
gether. The automatic adjustment program will not run normally
unless these files are stored in the same folder.
Ver_1.7r07.exe) of automatic adjustment program is moved/cop-
ied, be sure to move/copy the ColorReproductionAdj folder and
the file (GlColorReproductionAdjustment.exe) in the folder to-
gether. The automatic adjustment program will not run normally
unless these files are stored in the same folder.
3.
Program Files (MEGA model)
If the file compressed in ZIP format (DCR-SR62 Series Auto-Adj
Ver_1.7r06.zip) is decompressed, the following files will be ex-
panded:
Ver_1.7r06.zip) is decompressed, the following files will be ex-
panded:
When the application file (DCR-SR62 Series Auto-Adj
Ver_1.7r06.exe) of automatic adjustment program is moved/cop-
ied, be sure to move/copy the ColorReproductionAdj folder and
the file (GlgColorReproductionAdjustment.exe) in the folder to-
gether. The automatic adjustment program will not run normally
unless these files are stored in the same folder.
Ver_1.7r06.exe) of automatic adjustment program is moved/cop-
ied, be sure to move/copy the ColorReproductionAdj folder and
the file (GlgColorReproductionAdjustment.exe) in the folder to-
gether. The automatic adjustment program will not run normally
unless these files are stored in the same folder.
4.
Start of Automatic Adjustment Program
Double-click the application file (DCR-SR42 Series Auto-Adj
Ver_1.7r07.exe or DCR-SR62 Series Auto-Adj Ver_1.7r06.exe),
and the Automatic Adjustment Program will start.
Ver_1.7r07.exe or DCR-SR62 Series Auto-Adj Ver_1.7r06.exe),
and the Automatic Adjustment Program will start.
3
5
4
7
6
2
1
9
0
8
qa
DCR-SR42 Series: Ver_1.7r07
DCR-SR62 Series: Ver_1.7r06
DCR-SR62 Series: Ver_1.7r06
Ver. 1.7 2008.04
6-9
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
6.
Setting of Adjustment Mode
Before performing the adjustment, “Setting of Adjustment Mode”
is required.
is required.
[Setting method]
1) Connect the Camcorder to the PC with a USB cable, and turn
1) Connect the Camcorder to the PC with a USB cable, and turn
on the power switch.
2) The USB SELECT menu will appear on the LCD screen of
the Camcorder, and then select “COMPUTER” to establish
the connection.
the connection.
3) Start the Automatic Adjustment Program, and click the [Con-
nect] button on the Main Menu screen.
4) When the following message is displayed, turn off and on again
the power switch of the Camcorder.
Note:
Turning off and on the power switch causes the
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
5) Upon successful completion of the settings in the Adjustment
Mode, the operation of each button on the Main Menu screen
is enabled.
is enabled.
7.
Release of Adjustment Mode
To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.
ment Mode”.
[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
sage window to exit the Automatic Adjustment Program.
Note:
The Camcorder switches to the normal mode by turn-
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
6-10
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
1-3.
HDD SYSTEM ADJUSTMENTS
When the HDD is replaced, the following VBScript files are used.
The Automatic Adjustment Program (DCR-SR42 Series Auto-Adj
Ver_1.[]r[][].exe or DCR-SR62 Series Auto-Adj Ver_1.[]r[][].exe)
is not used.
• CheckHDDError.vbe
The Automatic Adjustment Program (DCR-SR42 Series Auto-Adj
Ver_1.[]r[][].exe or DCR-SR62 Series Auto-Adj Ver_1.[]r[][].exe)
is not used.
• CheckHDDError.vbe
• SetFactoryCheckDefault.vbe
• SetFactoryCheckFull.vbe
• ExecAfterFactoryCheck.vbe
For the VBScript files ([][][][][][][].vbe), the program is executed
by double-clicking the file.
by double-clicking the file.
Note:
The VBScript files can only be used on the PC in which the
SeusEX is installed.
SeusEX is installed.
Ver. 1.5 2007.09
Click on the first or last page to see other DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man4) service manuals if exist.