Sony DCR-PC4E / DCR-PC5 / DCR-PC5E (serv.man2) Service Manual ▷ View online
5-3
Board
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
VC-245 board
(COMPLETE)
CF-75 board
(COMPLETE)
PD-126 board
(COMPLETE)
VC-245 board
IC801 (EEPR
OM)
VC-245 board
IC502 (EEPR
OM)
VC-245 board
IC1407 (Flash memory) *1
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Table. 5-1-1(2).
*1: DCR-PC5/PC5E model only
Adjustment
Section
Initialization
of B, C, D, E,
F, 7, 8 page data
Camera
Color EVF
LCD
System control
Servo, RF
Video
Mechanism
Adjustment
Initialization of C, D, 8 page data
Initialization of B page data *1
Initialization of E, F, 7 page data
36MHz origin oscillation adj.
Zoom key center adj.
HALL adj.
Flange back adj.
Optical axis adj.
Color reproduction adj.
MAX GAIN adj.
AWB & LV standard data input
Auto white balance adj.
Mechanical shutter adj.
Steady shot check
VCO adj.
Bright adj.
Contrast adj.
White balance adj.
VCO adj.
Bright adj.
Black limit adj.
Contrast adj.
Center level adj.
V-COM adj.
White balance adj.
Serial No. input
Touch panel adj.
CAP FG duty adj.
PLL fo & LPF fo adj.
Switching position adj.
AGC center level adj.
APC & AEQ adj.
Chroma BPF fo adj.
S VIDEO OUT Y level adj.
S VIDEO OUT Cr, Cb level adj.
Tape path adj.
5-4
J-1
J-2
J-6
J-3
J-7
J-8
J-4
J-5
Fig. 5-1-1.
J-9
J-10
J-11
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
(Note 1)
(Note 1)
Siemens star chart
Clear chart for pattern box
CPC-6 flexible jig (Note 2)
CPC-6 terminal board jig
Mini pattern box
Camera table
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-370-B
J-6082-371-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For adjusting the video section
For adjusting the color viewfinder
For adjusting the color viewfinder
For adjusting the video section
For adjusting the color viewfinder
For adjusting the color viewfinder
For adjusting the flange back
For adjusting the flange back
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
• Regulated power supply
• Digital voltmeter
Note 1:
If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
Note 2:
When using the old CPC-6 flexible jig (J-6082-370-A), open the
cabinet (R) assembly.
cabinet (R) assembly.
5-5
Fig. 5-1-2.
1-1-2.
Preparations
Note 1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note 2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
1)
Connect the equipment for adjustments according to Fig. 5-1-2.
Note 3:
As removing the control switch block (FK-30350)(removing the
VC-245 board CN002) means removing the lithium 3V power
supply (BT4001), data such as date, time, user-set menus will be
lost. After completing adjustments, reset these data. If the cabinet
(R) has been removed, the self-diagnosis data, data on history of
use (total drum rotation time etc. ) will be lost. Before removing,
note down the self-diagnosis data (data of page:2, address: B0 to
C6) and the data on history use (data of page: 2, address: A2 to
AA). (Refer to “SELF-DIAGNOSIS FUNCTION” for the self-
diagnosis data, and to “5-4.Service Mode” for the data on the
history use.)
VC-245 board CN002) means removing the lithium 3V power
supply (BT4001), data such as date, time, user-set menus will be
lost. After completing adjustments, reset these data. If the cabinet
(R) has been removed, the self-diagnosis data, data on history of
use (total drum rotation time etc. ) will be lost. Before removing,
note down the self-diagnosis data (data of page:2, address: B0 to
C6) and the data on history use (data of page: 2, address: A2 to
AA). (Refer to “SELF-DIAGNOSIS FUNCTION” for the self-
diagnosis data, and to “5-4.Service Mode” for the data on the
history use.)
Note 4:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button of the adjustment remote commander.
The above procedure will enable the camera power to be turned
on with the control switch block (FK-30350) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
on with the control switch block (FK-30350) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
Note 5:
Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Pattern box
1.5 m
Front of the lens
5-6
Fig. 5-1-3.
Cabinet (R)
PO-5 board
NS-12
board
board
Lens block
CF-75
board
board
CPC-6 flexible jig
(J-6082-370-B)
(J-6082-370-B)
CPC-6 terminal board jig
(J-6082-371-A)
(J-6082-371-A)
CN3353
CN3354
CN001
CN004
CN003
VC-245 board
Adjustment remote
commander
commander
AUDIO/VIDEO
jack
jack
LANC jack
Color monitor
Vector scope
BJ-1 board
J310
J3101
J3102
CN3102
CN3104
CN3103
VIDEO
(Yellow)
(Yellow)
AUDIO Left
(White)
(White)
AUDIO Right
(Red)
(Red)
Must be connected.
CN009
CN005
CN006
CN002
View finder
CN3351
Must be connected when
performing the LCD system
adjustments.
performing the LCD system
adjustments.
Terminated at 75
Ω
Battery terminal
Must be connected when performing
the video or EVF system adjustments.
the video or EVF system adjustments.
AC power adaptor
AC-VF10 or
AC-VQ11
AC-VQ11
Click on the first or last page to see other DCR-PC4E / DCR-PC5 / DCR-PC5E (serv.man2) service manuals if exist.