Sony DCR-PC330 / DCR-PC330E (serv.man2) Service Manual ▷ View online
2-10
DCR-PC330/PC330E
2-13.HINGE ASSEMBLY
A
3
1
Rotate the hinge in the
direction of the arrow
A
.
2
Two tapping screws
(M1.7
×
3.5) (silver)
4
Tape (A)
5
Screw (grip)
(M1.7
×
2.5) (black)
6
Claw
9
Hinge cover (rear)
qa
Hinge cover (front)
7
Claw
q;
Claw
8
FP-705 flexible board
qs
Harness (PB-053)
qd
Hinge assembly
2-11
DCR-PC330/PC330E
2-14.EVF SECTION
8
2
FP-700 flexible
board (23P)
9
FP-702 flexible
board (16P)
1
VF-158 board (60P)
3
Control switch block
(FK5000) (8P)
4
VF protection sheet
VF protection
sheet
sheet
Caution
7
Three claws
qa
EVF section
Caution
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
q;
Screw (M1.7
×
2.5),
lock ace, p2 (silver)
5
FP-701 flexible
board (10P)
FP-701
flexible board
flexible board
Attach the VF protection sheet in the way
that the PF-701 flexible board is positioned
in the right angle with the harness (MIC unit).
that the PF-701 flexible board is positioned
in the right angle with the harness (MIC unit).
6
MIC unit (MIC5000) (4P)
Harness
(MIC unit)
(MIC unit)
2-12
DCR-PC330/PC330E
2-15.VF-158 BOARD
qs
2
Two claws
3
Slide the Finder in the
direction of the arrow.
1
Screw (M1.7
×
2.5),
lock ace, p2 (silver)
4
Two screws (M1.7
×
2.5),
lock ace, p2 (silver)
6
Two screws
(M1.7
×
2.5),
lock ace, p2 (silver)
7
VF PC board fixed plate
5
VF lens assembly,
VF regulation ring assembly
8
Two claws
9
Sleeve guide assembly
qd
LCX033AN-1
(16P)
qf
LCD cushion (2)
q;
LCD cushion (044)
qa
VF light sheet
qg
Three claws
qh
Back light holder
qj
BL cushion (B)
ql
Light guide plate block (0.44)
qk
BL retainer sheet metal
w;
VF-158 board
Caution
Caution
Be careful not to drop the LCD
cushion (044) and VF light sheet.
cushion (044) and VF light sheet.
Be careful not to drop the LCD cushion (2)
and BL cushion (B)
and BL cushion (B)
2-13
DCR-PC330/PC330E
2-16.STROBOSCOPE SECTION
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
Caution
1
Screw (M1.7
×
2.5),
lock ace, p2 (black)
2
Three tapping screws
(M1.7
×
3.5) (silver)
3
Stroboscope section
FP-707
The power capacitor of the flash unit is charged up to 300 V maximum. If you touch
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
the capacitor terminal that is charged to high voltage, you will receive an electric
shock. This high voltage is not discharged even if you turned off the main power
of this set, and it residues. Discharge the residual voltage referring to the service
note (page 1-2).
Caution
1
Condenser insulating sheet
2
Remove the
two solderings
3
Elect 80MF cap
6
Make the FP-707
board inside-out.
7
Stroboscope luminous
unit (ST5000) (24P)
8
ST insulating sheet
4
Screw (M1.7
×
2.5),
lock ace, p2 (silver)
5
Two claws
9
FP-707 board
2-17.FP-707 BOARD
Click on the first or last page to see other DCR-PC330 / DCR-PC330E (serv.man2) service manuals if exist.