DOWNLOAD Sony DCR-HC47E / DCR-HC48 / DCR-HC48E (serv.man4) Service Manual ↓ Size: 788.14 KB | Pages: 77 in PDF or view online for FREE

6-35

DCR-HC47E/HC48/HC48E_ADJ

Adjust the white balance reference at 3200K, and adjust the nor-
mal coefficient of the light value.

Subject

Clear chart
(AWB Adjustment Frame) (Note 3)

Adjustment Page

6F

Adjustment Address

2E to 31, E8 to EB

Note 1: Perform “Color Reproduction Adjustment” before this

adjustment.

Note 2: If reading/writing data on pages 6F, set data: 06 to page:

0, address: 10, and then select pages: F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 3: Perform “13. Picture Frame Setting (AWB Adjustment

Frame)” before this adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT PLUS ........................................................ OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu setting) .......................................... MANUAL

Order Page Address Data

Procedure

1

Check that the picture frame
is “AWB Adjustment Frame”.
If not,  perform “13. Picture
Frame Setting (AWB
Adjustment Frame)”

2

0

01

01

3

6

02

Check the data is “00”.
(Note 4)

4

Wait for 2 seconds.

5

6

01

43

Press PAUSE (Write) button.

6

6

01

41

Press PAUSE (Write) button.
(Note 5)

7

6

02

Check the data changes to
“01”.

Note 4: If not, select page: 6, address: 01, set data: 00, and press

PAUSE (Write) button.

Note 5: The adjustment data will be automatically input to page:

6F, address: 2E to 31, E8 to F3.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

01

00

Adjust the normal coefficient of the light value at 3200K.

Subject

Clear chart
(AWB Adjustment Frame) (Note 3)

Measuring Instrument

Adjusting remote commander

Adjustment Page

6F

Adjustment Address

2A, 2B

Note 1: Perform “F No. & ND Light Quality Standard Data In-

put” and “Auto White Balance Standard Data Input” be-
fore this adjustment.

Note 2: If reading/writing data on pages 6F, set data: 06 to page:

0, address: 10, and then select pages: F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 3: Perform “13. Picture Frame Setting (AWB Adjustment

Frame)” before this adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT PLUS ........................................................ OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu setting) .......................................... MANUAL

Order Page Address Data

Procedure

1

Check that the picture frame
is “AWB Adjustment Frame”.
If not, perform “13. Picture
Frame Setting (AWB
Adjustment Frame)”

2

0

01

01

3

6

02

Check the data is “00”.
(Note 4)

4

6

01

0D

Press PAUSE (Write) button.
(Note 5)

5

6

02

Check the data changes to
“01”.

Note 4: If not, select page: 6, address: 01, set data: 00, and press

PAUSE (Write) button.

Note 5: The adjustment data will be automatically input to page:

6F, address: 2A, 2B.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

01

00

6-36

DCR-HC47E/HC48/HC48E_ADJ

Order Page Address Data

Procedure

1

Check that the picture frame
is “AWB Adjustment Frame”.
If not,  perform “13. Picture
Frame Setting (AWB
Adjustment Frame)”

2

0

01

01

3

6

02

Check the data is “00”.
(Note 4)

4

0

10

06

5

F

44

2A

Press PAUSE (Write) button.

(6F)

6

F

45

Set the following data, and
press PAUSE (Write) button.

4E: NTSC model
AE: PAL model

7

F

46

5C

Press PAUSE (Write) button.

(6F)

8

F

47

98

Press PAUSE (Write) button.

(6F)

9

Place the C14 filter on the
lens.

10

0

10

00

11

6

01

47

Press PAUSE (Write) button.

12

6

01

45

Press PAUSE (Write) button.
(Note 5)

13

6

02

Check the data changes to
“01”.

Note 4: If not, select page: 6, address: 01, set data: 00, and press

PAUSE (Write) button.

Note 5: The adjustment data will be automatically input to page:

6F, address: 32 to 35, F4 to F7.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

01

00

3

Remove the C14 filter on the
lens.

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.

Subject

Clear chart
(AWB Adjustment Frame) (Note 3)

Filter

Filter C14 for color temperature
correction

Adjustment Page

6F

Adjustment Address

32 to 35, 44 to 47, F4 to F7

Note 1: Perform “F No. & ND Light Quality Standard Data In-

put” and “Auto White Balance Standard Data Input” be-
fore this adjustment.

Note 2: If reading/writing data on pages 6F, set data: 06 to page:

0, address: 10, and then select pages: F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 3: Perform “13. Picture Frame Setting (AWB Adjustment

Frame)” before this adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT PLUS ........................................................ OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu setting) .......................................... MANUAL

(6F)

6-37

DCR-HC47E/HC48/HC48E_ADJ

Order Page Address Data

Procedure

1

Check that the picture frame
is “AWB Adjustment Frame”.
If not, perform “13. Picture
Frame Setting (AWB
Adjustment Frame)”

2

6

02

Check the data is “00”.
(Note 4)

Auto white balance check

3

6

01

C1

Press PAUSE (Write) button.

4

6

02

Check the data changes to
“01”.

5

6

0C

Check the data is “00”.

6

6

01

00

Press PAUSE (Write) button.

InOut data check

7

Place the ND filter 1.5 (1.0 +
0.4 + 0.1) on the lens.

8

6

01

4B

Press PAUSE (Write) button

9

6

02

Check the data changes to
“01”.

10

6

0C

Check the data is “00”.

11

Remove the ND filter 1.5
(1.0 + 0.4 + 0.1) on the lens.

Note 4: If not, select page: 6, address: 01, set data: 00, and press

PAUSE (Write) button.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

Subject

Clear chart
(AWB Adjustment Frame) (Note 3)

Filter

ND filter 1.0, 0.4 and 0.1

Measuring Instrument

Adjusting remote commander

Specified Value

Data of page: 6, address: 0C is “00”

Note 1: Perform “Color Reproduction Adjustment” and “Auto

White Balance Adjustment” before this adjustment.

Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Perform “13. Picture Frame Setting (AWB Adjustment

Frame)” before this adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT PLUS ........................................................ OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu setting) .......................................... MANUAL

6-38

DCR-HC47E/HC48/HC48E_ADJ

Precautions on the Parts Replacement
There are two types of repair parts.

Type A

ENC03MA

Type B

ENC03MB

Replace the broken sensor with a same type sensor. If replace with
other type parts, the image will vibrate up and down or left and
right during hand-shake correction operations.

Precautions on Angular Velocity Sensor
The sensor incorporates a precision oscillator. Handle it with care
as if it dropped, the balance of the oscillator will be disrupted and
operations will not be performed properly.

Subject

Not required

Measurement Point

Displayed data of page: 1 (Note 1)

Measuring Instrument

Adjusting remote commander

Specified value

PITCH data: 2680 to 5080
YAW data: 2680 to 5080

Note 1: The right four digits of the page: 1 displayed data of the

adjusting remote commander.

1 : XX : XX

Displayed data

Note 2: Check that the data of page: 0, address: 10 is “00”.

Switch setting
1) ZOOM ..................................................................... TELE end
2) STEADY SHOT (Menu setting) ....................................... ON

Order Page Address Data

Procedure

  PITCH sensor output check (SE7002 of CD-672 board)

1

0

03

11

2

1

With the set in still state,
check that the displayed data
(Note 1) satisfies the PITCH
data specified value.

  YAW sensor output check (SE7001 of CD-672 board)

3

0

03

12

4

1

With the set in still state,
check that the displayed data
(Note 1) satisfies the YAW
data specified value.

5

0

03

00

  Steady shot operation check

6

Shake the set vertically and
horizontally to check that the
steady shot function operates
normally.