Sony DCR-DVD301 (serv.man4) Service Manual ▷ View online
6-3
DCR-DVD301
CD-504 board
(COMPLETE)
LB-107 board
(COMPLETE)
SE-155 board
(COMPLETE)
PD-241 board
(COMPLETE)
VC-354 board
(COMPLETE)
MD-104 board
(COMPLETE)
VC-354 board
IC3004 (EEPR
OM)
VC-354 board
IC3302 (EEPR
OM)
VC-354 board
IC3401 (Flash memory)
MD-104 board
IC4200 (EEPR
OM)
Supporting
Board
EEPROM
replacement
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z z
z
z z
z
z z
z
z
z
z
z
Table. 6-1-1(2).
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Adjustment
Section
Initialization of A, B, C, D,
E, F, 14, 19, 1E, 1F page data
Camera
Color EVF
LCD
Video
Adjustment
Initialization of A, B, C, D, 1B page data
Initialization of E, F, 14, 19, 1E, 1F page data
66MHz origin oscillation check
HALL adj.
MR adj.
Flange back adj.
MAX GAIN adj.
Mechanical shutter adj.
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
Steady shot check
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
6-4
DCR-DVD301
6-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
J-1
J-2
J-3
J-4
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
Pattern box PTB-450
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
Color chart for
pattern box
For PTB-450:
J-6020-250-A
For PTB-1450:
J-6082-559-A
pattern box
For PTB-450:
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-5
J-6
J-7
J-8
Siemens star chart
J-6080-875-A
J-6080-875-A
Clear chart for
pattern box
For PTB-450:
J-6080-621-A
For PTB-1450:
J-6082-560-A
pattern box
For PTB-450:
J-6080-621-A
For PTB-1450:
J-6082-560-A
Mini pattern box
J-6082-353-B
J-6082-353-B
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
commander
(RM-95 upgraded)
J-6082-053-B
J-9
J-10
CPC-8 jig
J-6082-388-A
J-6082-388-A
Camera table
J-6082-384-A
J-6082-384-A
Fig. 6-1-1.
J-11
Extension cable
(100P, 0.5mm)
J-6082-352-A
(100P, 0.5mm)
J-6082-352-A
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-12
6-5
DCR-DVD301
Fig. 6-1-2.
1-1-2.
Preparations
Note1: For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
Note2: When performing only the adjustments, the lens block and boards
need not be disassembled.
Note3: Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-3.
Note4: As removing the cabinet (R) assembly (removing CN1004 of the
VC-354 board) means removing the lithium 3V power supply
(BT5401 on the CK-146 board), data such as date, time, user-set
menus will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (user
initial power on date, final condensation occurrence data) will be
kept even if the lithium 3V power supply is removed. (Refer to
“6-3. Service Mode” for the self-diagnosis data and the data on
history of use.)
(BT5401 on the CK-146 board), data such as date, time, user-set
menus will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (user
initial power on date, final condensation occurrence data) will be
kept even if the lithium 3V power supply is removed. (Refer to
“6-3. Service Mode” for the self-diagnosis data and the data on
history of use.)
Note5: Setting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (PS8700) removed. After
completing adjustments, be sure to exit the “Forced MOVIE mode”.
on with the control switch block (PS8700) removed. After
completing adjustments, be sure to exit the “Forced MOVIE mode”.
Note6: Exiting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Front of the lens
Pattern box
1.0 m (PTB-450)
0.4 m (PTB-1450)
0.4 m (PTB-1450)
6-6
DCR-DVD301
Fig. 6-1-3.
Adjustment remote
commander (RM-95)
commander (RM-95)
LANC
AC power
adaptor
adaptor
AC IN
DC-IN connector
CPC-8 jig
(J-6082-388-A)
(J-6082-388-A)
EG grip screw (M1.7x4)
Remove CPC lid
Fig. 3-090-600-01
Fig. 3-090-600-01
[CONNECTION OF EQUIPMENT]
Click on the first or last page to see other DCR-DVD301 (serv.man4) service manuals if exist.