DOWNLOAD Sony DCR-DVD301 (serv.man3) Service Manual ↓ Size: 198.95 KB | Pages: 5 in PDF or view online for FREE

Model
DCR-DVD301 (serv.man3)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
198.95 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 1
File
dcr-dvd301-sm3.pdf
Date

Sony DCR-DVD301 (serv.man3) Service Manual ▷ View online

SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver. 1.1  2006. 10
LEVEL
 
1
Link
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Sony EMCS Co.
2006J1600-1
  ©2006.10
Published by Kohda TEC
9-876-765-41
DIGITAL VIDEO CAMERA RECORDER
DCR-DVD301
DCR-DVD301
US Model
Canadian Model
DCR-DVD301
RMT-835
— 2 —
DCR-DVD301
SPECIFICATIONS
Video camera
recorder
System
Video recording format
DVD-Video
DVD-VR (DVD-RW only)
Audio recording system
2ch Dolby* Digital
Video signal
NTSC color, EIA standards
Usable discs
8 cm DVD-R and DVD-RW
Video compression format
MPEG2/JPEG (Still images)
Recording/playback time
HQ: Approx. 20 minutes
SP: Approx. 30 minutes
LP: Approx. 60 minutes
Viewfinder
Electric viewfinder (color)
Image device
3.6 mm (1/5 type) CCD (Charge
Coupled Device)
Number of Pixels
Gross: Approx. 1 070 000 pixels
Effective (for still images ):
Approx. 1 000 000 pixels
Effective (for movies):
Approx. 690 000 pixels
Lens
Carl Zeiss Vario-Tessar
Filter diameter:
25 mm (1 in.)
10  (Optical), 120
×
 (Digital)
F = 1.8 – 2.3
Focal length
3.2 – 32 mm (5/32 – 1 5/16 in.)
When converted to a 35 mm still
camera
For movies:
46 – 460 mm (1 7/8 – 18 1/8 in.)
For still images:
38 – 380 mm (1 1/2 – 15 in.)
Color temperature
Auto, HOLD (Hold), 
Indoor
(3 200 K), 
Outdoor (5 800 K)
Minimum illumination
7 lx (lux) (F 1.8)
0 lx (lux) (in the NightShot Plus
mode)*
* Objects unable to be seen due to
the dark can be shot with
infrared lighting.
Input/Output connectors
AUDIO/VIDEO input/output
AV MINI JACK,
input/output autoswitch
Video : 1 Vp-p, 75 
ohms),
unbalanced
Audio : 327 mV, (at output
impedance of more than 47 k
kilohms))
Output impedance of less than
2.2 k
kilohms)
Input impedance of more than
47 k
kilohms)
USB jack
mini-B
REMOTE jack
Stereo mini-minijack (ø 2.5 mm)
MIC jack
Stereo minijack (ø 3.5 mm)
LCD display
Picture
8.8 cm (3.5 type)
Total number of pixels
123 200 (560 
×
 220)
General
Power requirements
7.2 V (battery pack)
8.4 V (AC adaptor)
Average power consumption
(when using the battery pack)
During camera recording using
LCD: 4.3 W
Viewfinder: 4.2 W
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
–20
°
C to + 60
°
C
(–4
°
F to + 140
°
F)
Dimensions (Approx.)
71.8 
×
 88 
×
 136 mm
(2 7/8 
×
 3 1/2 
×
5 3/8 in.)
(w/h/d)
Mass (approx.)
570 g (1 lb 4 oz)
main unit only
675 g (1 lb 7 oz)
including the battery pack,
disc and lens cap
Supplied accessories
See page 4.
* Manufactured under license
from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
AC adaptor
AC-L15A/L15B
Power requirements
100 – 240 V AC, 50/60 Hz
Current consumption
0.35 – 0.18 A
Power consumption
18 W
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
–20
°
C to + 60
°
C (–4
°
F to + 140
°
F)
Dimensions (approx.)
56 
×
 31 
×
 100 mm
(2 1/4 
×
 1 1/4 
×
    4 in.) (w/h/d)
excluding projecting parts
Mass (approx.)
190 g (6.7 oz)
excluding power cord
Rechargeable
battery pack
NP-FM50
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
8.5 Wh (1 180 mAh)
Dimensions (approx.)
38.2 
×
 20.5 
×
 55.6 mm
(1 9/16 
×
 13/16 
×
 2 1/4 in.)
(w/h/d)
Mass (approx.)
76 g (2.7 oz)
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Type
Lithium ion
Design and specifications are
subject to change without notice.
— 3 —
DCR-DVD301
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
WARNING!!
WHEN  SERVICING,  DO  NOT  APPROACH  THE  LASER
EXIT  WITH  THE  EYE  TOO  CLOSELY.  IN  CASE  IT  IS
NECESSARY  TO  CONFIRM  LASER  BEAM  EMISSION,
BE  SURE  TO  OBSERVE  FROM  A  DISTANCE  OF MORE
THAN   30  cm  FROM  THE  SURFACE  OF  THE
OBJECTIVE  LENS  ON  THE  OPTICAL  PICK-UP  BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
CAUTION
Use of controls or adjustments or performance 
procedures other than those specified herein may 
result in hazardous radiation exposure.
— 4 —
DCR-DVD301
Checking supplied accessories.
   Other accessories
2-186-668-11 MANUAL, INSTRUCTION (ENGLISH)
2-186-668-21 MANUAL, INSTRUCTION (FRENCH)(CND)
Make sure that the following accessories are supplied with your camcorder.
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Power cord (Main lead)(1)
0
 1-790-107-22
AC power adaptor (1)
(AC-L15A/L15B)
0
 1-477-533-51
DVD-R (DMR30) (1)
(not supplied)
A/V connecting cable
(1.5m) (1)
1-823-156-13
NP-FM50 battery pack (1)
(not supplied)
Wireless Remote Commander (1)
(RMT-835)
1-478-496-21
CD-ROM
(SPVD-011 (I) USB Driver) (1)
3-086-131-01
Lens cap (1)
X-3954-323-1
Cleaning cloth (1)
3-073-861-01
USB cable (1)
1-823-930-21
Shoulder strap (1)
2-021-016-01
Lid Battery 
Case
(3-083-973-01)
Page of 5
Display

Sony DCR-DVD301 (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sony DCR-DVD301 (serv.man3) Service Manual ↓ Size: 198.95 KB | Pages: 5 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DCR-DVD301 (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DCR-DVD301 (serv.man3) Movie. Information contained in Sony DCR-DVD301 (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.