Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man4) Service Manual ▷ View online
6-18
DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ
9.
1A Page table
Note 1:
If reading/writing data on pages 1A, set data: 01 to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
10. 1B Page table
Note 1:
Note 1:
If reading/writing data on pages 1B, set data: 01 to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6-19
DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ
2.
Modification of E, F, 19, 1E, 1F Page Data
If the E, F, 1E, 1F page data has been initialized, change the data
of the “Fixed data-2” address shown in the following table by
manual input.
of the “Fixed data-2” address shown in the following table by
manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages E, F, set data: 00 to page: 0,
address: 10, and then select pages E, F.
3) If modification of data on pages 19, 1E, 1F, set data: 01 to
page: 0, address: 10, and then select pages 9, E, F.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
the data built in the same model.
Note 1:
If copy the data built in the different model, the
camcorder may not operate.
camcorder may not operate.
5) When changing the data, press the PAUSE (Write) button of
the adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
data to write the data in the non-volatile memory.
6) Check that the data at the addresses for adjustment are initial
values (adjustment initial values) listed in the table.
If different, change them to the adjustment initial values.
If different, change them to the adjustment initial values.
Processing after Completing Modification E, F, 19, 1E, 1F
page data:
page data:
Order Page Address Data
Procedure
1
0
10
00
2
7
01
FF
3
7
00
01
Press PAUSE (Write) button.
4
Perform “36MHz Origin
Oscillation Adjustment” of
VIDEO SYSTEM
ADJUSTMENTS.
Oscillation Adjustment” of
VIDEO SYSTEM
ADJUSTMENTS.
3.
E Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 3D
Fixed data-1 (Initialized data)
3E
Fixed data-2
3F to 47
Fixed data-1 (Initialized data)
48
Fixed data-2
49 to E3
Fixed data-1 (Initialized data)
E4
E5
Fixed data-2
E6 to E9
Fixed data-1 (Initialized data)
EA
Fixed data-2
EB to FF
Fixed data-1 (Initialized data)
1-2-2.
Initialization of E, F, 19, 1E, 1F Page Data
1.
Initializing of E, F, 19, 1E, 1F Page Data
Note 1:
If “Initialization of Pages E, F, 19, 1E, 1F” is executed,
all data on pages E, F, 19, 1E, 1F are initialized. (Only an
individual page cannot be initialized)
all data on pages E, F, 19, 1E, 1F are initialized. (Only an
individual page cannot be initialized)
Note 2:
If the E, F, 19, 1E, 1F page data has been initialized, the
following adjustments need to be performed again.
1) Modification of E, F, 19, 1E, 1F page data
2) “36 MHz origin oscillation adjustment” of the video
following adjustments need to be performed again.
1) Modification of E, F, 19, 1E, 1F page data
2) “36 MHz origin oscillation adjustment” of the video
system adjustment.
3) Camera system adjustment
Note 3:
NTSC model: DCR-DVD105/DVD605
PAL model: DCR-DVD105E/DVD605E
PAL model: DCR-DVD105E/DVD605E
Adjustment Page
E
Adjustment Address
00 to FF
Adjustment Page
F
Adjustment Address
10 to FF
Adjustment Page
19
Adjustment Address
00 to 33
Adjustment Page
1E
Adjustment Address
00 to FF
Adjustment Page
1F
Adjustment Address
00 to FF
Initializing method:
Order Page Address Data Procedure
1
0
01
01
2
0
10
00
Set the following data
3
6
01
2D: NTSC model
2F: PAL model
2F: PAL model
4
6
03
FF
Press PAUSE button.
5
Wait for 6 seconds.
6
6
02
Check the data changes to
“01”.
“01”.
7
Perform “Modification of E,
F, 19, 1E, 1F Page Data”
F, 19, 1E, 1F Page Data”
6-20
DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ
Address
Initial value
Remark
NTSC PAL
46
3F
3F
Flange back adj.
47
2C
2C
48
17
17
49
4A
4A
4A
00
00
4B
00
00
4C
00
00
4D
00
00
4E
4F
4F
4F
19
19
50
00
00
51
30
30
52
04
04
53
00
00
54
00
00
55
00
00
56 to 63
Fixed data-1 (Initialized data)
64
65
Fixed data-2
66 to 8C
Fixed data-1 (Initialized data)
8D
Fixed data-2
8E to FF
Fixed data-1 (Initialized data)
4.
F Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
10
80
80
36 MHz origin oscillation adj.
11
Fixed data-1 (Initialized data)
12
50
50
HALL adj.
13
50
50
14
89
89
15
00
00
16
17
17
17
00
00
18
19
19
19
8F
A3
Max gain adj.
1A
36
36
LV standard data input
1B
00
00
1C
00
00
F No. standard data input
1D
00
00
1E
00
00
1F
00
00
20
00
00
21
00
00
22
00
00
23
00
00
24 to 29
Fixed data-1 (Initialized data)
2A
23
27
AWB standard data input
2B
B4
94
2C
08
08
2D
75
95
2E
16
18
AWB adj.
2F
0A
56
30
0D
0E
31
99
2E
32
Fixed data-1 (Initialized data)
33
41
46
Color reproduction adj.
34
Fixed data-1 (Initialized data)
35
2B
2E
Color reproduction adj.
36 to 39
Fixed data-1 (Initialized data)
3A
00
00
Color reproduction adj.
3B
F0
EE
3C, 3D
Fixed data-1 (Initialized data)
3E
29
29
AWB adj.
3F
80
00
40
5B
5B
41
00
80
42, 43
Fixed data-1 (Initialized data)
44
3A
3A
Flange back adj.
45
74
74
6-21
DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ
7.
1F Page table
Note 1:
If reading/writing data on pages 1F, set data: 01 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 1F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages 1F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 1B
Fixed data-1 (Initialized data)
1C
00
00
Emergency memory address
1D
00
00
(Camera section)
1E
00
00
1F
00
00
20 to 6B
Fixed data-1 (Initialized data)
6C
Fixed data-2
6D
Fixed data-1 (Initialized data)
6E
Fixed data-2
6F to 8B
Fixed data-1 (Initialized data)
8C
Fixed data-2
8E to 90
Fixed data-1 (Initialized data)
91
Fixed data-2
92, 93
Fixed data-1 (Initialized data)
94
Fixed data-2
95
Fixed data-1 (Initialized data)
96
97
Fixed data-2
98 to A0
Fixed data-1 (Initialized data)
A1
Fixed data-2
A2
Fixed data-1 (Initialized data)
A3
Fixed data-2
A4 to DF
Fixed data-1 (Initialized data)
E0
E1
E2
Fixed data-2
E3
E4
E5
Fixed data-1 (Initialized data)
E6
E7
Fixed data-2
E8 to FE
Fixed data-1 (Initialized data)
FF
Fixed data-2
5.
19 Page table
Note 1:
If reading/writing data on pages 19, set data: 01 to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages 19 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 9. By this data set-
ting, the pages 19 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 33
Fixed data-1 (Initialized data)
6.
1E Page table
Note 1:
If reading/writing data on pages 1E, set data: 01 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
the E, F, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man4) service manuals if exist.