Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
Revision History
Revision History
LEVEL
1
Link
MODEL INFORMATION TABLE
ACCESSORIES
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
INSTRUCTION MANUAL
Link
DCR-DVD105/DVD105E/DVD605/DVD605E_L1
Ver. 1.3 2008.03
Sony EMCS Co.
2008C0500-1
© 2008.3
Published by Kohda TEC
9-876-924-43
Photo: DCR-DVD105
DIGITAL VIDEO CAMERA RECORDER
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
US Model
Canadian Model
AEP Model
UK Model
East European Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
DCR-DVD105/DVD105E/
DVD605/DVD605E
Revised-2
Replace the previously issued
SERVICE MANUAL 9-876-924-42
with this manual.
SERVICE MANUAL 9-876-924-42
with this manual.
— 2 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L1
SPECIFICATIONS
These specifications are extracted from instruction
manual of DCR-DVD105E/DVD605E.
manual of DCR-DVD105E/DVD605E.
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format
Dolby Digital 2ch
Dolby Digital Stereo Creator
Dolby Digital Stereo Creator
Video signal
PAL color, CCIR standards
Usable discs
8cm DVD-R/DVD-RW/DVD+RW
Recording format
Movie
DVD-R:
DVD-VIDEO
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording
(VR mode)
(VR mode)
DVD+RW: DVD+RW Video
Still image
Exif
*1
Ver.2.2
Recording/playback time
HQ: Approx. 20 min
SP: Approx. 30 min
LP: Approx. 60 min
SP: Approx. 30 min
LP: Approx. 60 min
Viewfinder
Electric viewfinder
color
color
Image device
3 mm (1/6 type) CCD (Charge Coupled Device)
Gross:
Approx. 800 000 pixels
Effective (Movie):
Approx. 400 000 pixels
Effective (Still):
Approx. 400 000 pixels
Gross:
Approx. 800 000 pixels
Effective (Movie):
Approx. 400 000 pixels
Effective (Still):
Approx. 400 000 pixels
Lens
Carl Zeiss Vario-Tessar
Filter diameter: 25mm (1 in.)
Optical:20
Filter diameter: 25mm (1 in.)
Optical:20
×, Digital:40×, 800×
F=1.8-3.1
Focal length
f=2.3 - 46mm (3/32 - 1 13/16 in.)
When converted to a 35 mm still camera
For movies:
44 - 880mm (1 3/4 - 34 1/32 in.)
For still images:
44 - 880mm (1 3/4 - 34 1/32 in.)
When converted to a 35 mm still camera
For movies:
44 - 880mm (1 3/4 - 34 1/32 in.)
For still images:
44 - 880mm (1 3/4 - 34 1/32 in.)
Color temperature
[AUTO], [ONE PUSH], [INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
[OUTDOOR] (5 800 K)
Minimum illumination
5 lx (lux) (F1.8)
0 lx (lux) (in the NightShot plus function)
0 lx (lux) (in the NightShot plus function)
*2
*1
“Exif” is a file format for still images, established
by the JEITA (Japan Electronics and Information
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
by the JEITA (Japan Electronics and Information
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
*2
Objects unable to be seen due to the dark can be
shot with infrared lighting.
shot with infrared lighting.
• Manufactured under license from Dolby
Laboratories.
Input/Output connectors
Audio/Video output
10 pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms), unbalanced
Luminance signal: 1 Vp-p, 75
Ω (ohms),
unbalanced
Chrominance signal: 0.3 Vp-p, 75
Chrominance signal: 0.3 Vp-p, 75
Ω (ohms),
unbalanced
Audio signal: 327 mV (at Load impedance
47 k
Audio signal: 327 mV (at Load impedance
47 k
Ω (kilohms)), Output impedance less than
2.2 k
Ω (kilohms)
LCD screen
Picture
6.2 cm (2.5 type)
Total number of pixels
123 200 (560
× 220)
General
Power requirements
7.2 V (battery pack)
8.4 V (AC Adaptor)
8.4 V (AC Adaptor)
Average power consumption
During camera recording using LCD
Viewfinder
Viewfinder
Operating temperature
0
°C to + 40°C (32°F to 104°F)
Storage temperature
-20
°C to + 60°C (-4°F to + 140°F)
Dimensions (Approx.)
54
× 88 × 129mm (2 1/4 × 3 1/2 × 5 1/8 in.)
(w
× h × d)
Mass (Approx.)
380 g (13 oz) main unit only
430 g (15 oz) including the NP-FP50
rech
430 g (15 oz) including the NP-FP50
rech
AC Adaptor (1)
Mains lead (1)
A/V connecting cable (1)
Rechargeable battery pack
NP-FP50 (1)
Cleaning cloth (1)
Lens cap (1)
Operating Guide (This manual) (1)
Mains lead (1)
A/V connecting cable (1)
Rechargeable battery pack
NP-FP50 (1)
Cleaning cloth (1)
Lens cap (1)
Operating Guide (This manual) (1)
argeable battery pack and disc
Supplied accessories
AC Adaptor AC-L25A/L25B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18W
Output voltage
DC 8.4V
*
Operating temperature
0
°C to + 40°C (32°F to 104°F)
Storage temperature
-20
°C to + 60°C (-4°F to + 140°F)
Dimensions (Approx.)
56
× 31 × 100 mm (2 1/4 × 1 1/4 × 4 in.)
(w
× h × d) excluding the projecting parts
Mass (Approx.)
190 g (6.7 oz) excluding the mains lead
*
See at the label of AC Adaptor for other
specifications.
specifications.
Rechargeable battery pack NP-FP50
Maximum output voltage
DC8.4V
Output voltage
DC7.2V
Capacity
4.9 wh (680 mAh)
Dimensions (Approx.)
31.8
× 18.5 × 45.0 mm
(1 5/16
× 3/4 × 1 13/16 in.) (w× h× d)
Mass (Approx.)
40 g (1.5 oz)
Operating temperature
0
°C to + 40°C (32°F to 104°F)
Type
Li-ion
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L1
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Model information table
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
EE
: East European model
Model DCR-DVD105 DCR-DVD105E DCR-DVD605 DCR-DVD605E
Destination
US, CND, E, AR, BR
AEP, UK, NE, EE
E, KR
E, HK, AUS, CH
Color system
NTSC
PAL
NTSC
PAL
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
HK : Hong Kong model
JE
JE
: Tourist model
KR
: Korea model
MX : Mexican Model
NE
NE
: North European model
— 4 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L1
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder or LCD
screen what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
1 1
3 1
C
Repaired by:
Refer to “3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
SELF-DIAGNOSIS FUNCTION
Display