DOWNLOAD Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man4) Service Manual ↓ Size: 1.42 MB | Pages: 82 in PDF or view online for FREE

6-10

DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ

•

Install method:
1) “ADCUSBDrvr120e.EXE” is double-clicked, and the self-ex-

tractor is started.

2) Click OK.

3) “Setup.exe” is double-clicked, and the installer is started.

4) Click Next.

5) Click Agree.

6) Click Next.

7) Click Next.

8) Click Next.

6-11

DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ

9) Click Next.

10) Click Close.

11) Select Start / All Programs / ADC Instruments USB Driver

1.2.0 / Installing WinDriver.

12) The following screen is opened, then it terminates by itself.

6-12

DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ

Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.

1) Connect the equipment for adjustments according to Fig. 6-1-3.

Pattern box

Front of the lens

L = 1 m (PTB-450)
L = 40 cm (PTB-1450)

L

Camera

PC 

(The SeusCam must be installed in the PC.)

OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
         Three connectors are required.

HASP Key

USB cable
(1-829-579-61)

FP-339 flexible board
(1-867-583-21)

 To DC IN jack

AC IN

AC adaptor
AC-L25A/L25B
(1-479-288-11)

Audio R

Video

S-Video or
Video

Color monitor

Vectorscope

Terminated

75 

Ω

Video system Adjustment

Camera system Adjustment

Osilloscope

Terminated
75 

Ω

Audio L

To A/V jack

Adjustment remote 
commander

RM-95
(J-6082-053-B)

Multi cable
for service
(J-6082-535-A)

NEW LANC JIG
(J-6082-565-A)
LANC cable
(J-6082-442-A)

LANC

Before connecting the USB cable, set the following data by using the adjustment remote commander.

1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the PAUSE (Write) button.

6-13

DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ

H

A=B

C=D

A B

B

C

D

A

Enlargement

V

Electronic beam scanning frame

CRT picture frame

B

A

Difference in level

Y

ello

w

Cy

an

Green

White

Magenta

Red

Blue

Y

ello

w

Cy

an

Green

White

Magenta

Red

Blue

Fig. a
(VIDEO terminal of A/V jack
output waveform)

Fig. b (monitor TV picture)

Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.

Unless otherwise specified, set the switches as follows and perform adjustments without inserting disc.

1. POWER switch ............................................................. Movie
2. BACK LIGHT .................................................................. OFF
3. PROGRAM AE (MENU setting) ................................. AUTO
4. EXPOSE (MENU setting) ............................................ AUTO
5. WHITE BAL. (MENU setting) .................................... AUTO
6. FOCUS (MENU setting) .............................................. AUTO

7. COLOR SLOW S (MENU setting) ................................. OFF
8. DIGITAL ZOOM (MENU setting) ................................. OFF
10. STEADY SHOT (MENU setting) ................................... OFF
11. DIGITAL EFFECT (MENU setting) .............................. OFF
12. PICTURE EFFECT (MENU setting) .............................. OFF
13. DEMO MODE (MENU setting) ..................................... OFF

1) Color bar chart (Color reproduction adjustment frame)

When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)

2) Clear chart (All whire frame)

Remove the color bar chart from pattern box and insert a clear
chart in its place. (Then adjust the zoom to TELE side from
WIDE side, and stop it when the black frame of the chart
disappears.)

3) Chart for flange back adjustment

Join together a piece of white A0 size paper (1189mm 

× 841

mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.

Use a non-reflecting and non-glazing vellum paper.  The
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.

Black

White

841 mm

1189 mm

Basically carry out adjustments in the order given.