DOWNLOAD Sony DVP-NC65K / DVP-NC66K Service Manual ↓ Size: 6.4 MB | Pages: 89 in PDF or view online for FREE

1-4

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. 
Select one of the patterns 

A through C, according to the input jack on your TV monitor, 

projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or 
monitor, you must use pattern 

C.

A

Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will 
enjoy standard quality images.
With this connection, select “NORMAL (INTERLACE)” (default) by pressing the 
PROGRESSIVE button on the front panel.

VIDEO

AUDIO

INPUT

L

R

P

R

/C

R

P

B

/C

B

Y

COMPONENT

VIDEO IN

INPUT

S VIDEO

Audio/video 
cord (supplied)

Component video 
cord (not supplied)

(yellow)

TV, projector, or AV 
amplifier (receiver)

to S VIDEO OUT

TV, projector, or AV 
amplifier (receiver)

(green)

S VIDEO cord 
(not supplied)

TV, projector, or AV 
amplifier (receiver)

(red)

(green)

(blue)

(red)

to LINE OUT (VIDEO)

l : Signal flow

CD/DVD player

to COMPONENT 
VIDEO OUT

(blue)

(yellow)

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

,continued

B

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select “NORMAL (INTERLACE)” (default) by pressing the 
PROGRESSIVE button on the front panel.

C

Connect the component via the COMPONENT VIDEO OUT jacks using a component video 
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will 
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the 
PROGRESSIVE button on the front panel to output progressive signals. For details, see “Using 
the PROGRESSIVE button” (page 17).

When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see 
page 69.

To change the colour system
If the on-screen menu of the player does not appear on the connected TV, switch the player’s 
colour system to match the colour system of the TV (NTSC or PAL).
First turn off the player by pressing 

"/1, and then press "/1 again while holding down x on the 

player. The player turns back on, and the name of the colour system scrolls across the front panel 
display.

Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you 
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the 
player to this jack.

Green

Blue

Red

Green

Blue

Red

VCR

CD/DVD player

TV

Connect 
directly

By using the PROGRESSIVE button on the front panel, you can select the signal format in 
which the player outputs video signals (Progressive or Interlace), and the conversion method for 
progressive signals. The PROGRESSIVE indicator lights up when the player outputs 
progressive signals.
Each time you press PROGRESSIVE, the display changes as follows:

PROGRESSIVE AUTO

m

PROGRESSIVE VIDEO

m

NORMAL (INTERLACE)

◆PROGRESSIVE AUTO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and 
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when 
either of the above conditions is not met.
◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when 
either of the above conditions is not met.
◆NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT 
(VIDEO) or S VIDEO OUT).
◆About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 
30 frames/60 fields (25 frames/50 fields) per second. Film-based software is derived from film 
and displays images at 24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, 
the progressive signals need to be converted to match the type of DVD software that you are 
watching.

When you play video-based software in progressive signal format, sections of some types of images may 
appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. 
Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in the 
normal (interlace) format.

,

Select one of the following patterns 

A or B, according to the input jack on your TV monitor, 

projector, or AV amplifier (receiver). 
This will enable you to listen to sound.

z Hint
For correct speaker location, see the operating instructions supplied with the connected components.

S VIDEO OUT

COMPONENT VIDEO OUT

Y

PB/CB

PR/CR

VIDEO

VIDEO

AUDIO

INPUT

L

R

DIGITAL OUT

COAXIAL

OPTICAL

R-AUDIO-L

LINE OUT

LINE OUT

R-AUDIO-L

VIDEO

DIGITAL OUT

COAXIAL

OPTICAL

AV amplifier (receiver) 
with a decoder

(red)

TV, projector, or AV 
amplifier (receiver)

Audio/video 
cord (supplied)

: Signal flow

Coaxial digital cord 
(not supplied)

to DIGITAL OUT
(COAXIAL or OPTICAL)

to LINE OUT L/R (AUDIO)

Optical digital cord (not supplied)

Rear (L)

CD/DVD player

(white)

(yellow)*

(yellow)*

(white)

(red)

[Speakers]

Front (L)

[Speakers]

to coaxial 
digital input

Rear (R)

Front (R)

Subwoofer

or

Centre

* The yellow plug is used for video signals (page 15).

to optical 
digital input

1-5

A

This connection will use your TV’s or stereo 
amplifier’s (receiver’s) two speakers for 
sound. Connect using the audio/video cord 
(supplied).

• Surround effect (page 47)
TV: Dynamic Theatre, Dynamic, Wide, 
Night

Stereo amplifier (receiver): Standard, Night

B

If your AV amplifier (receiver) has a Dolby 
Digital*

1

, DTS*

2

, or MPEG audio decoder 

and a digital input jack, use this connection.
Connect using a coaxial or optical digital cord 
(not supplied).

• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG 
audio (5.1ch)

*1

Manufactured under license from Dolby 
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol 
are trademarks of Dolby Laboratories.

*2

“DTS” and “DTS Digital Out” are trademarks of 
Digital Theater Systems, Inc.

• After you have completed the connection, make 

the appropriate settings in Quick Setup (page 20). 
If your AV amplifier (receiver) has an MPEG 
audio decoder function, set “MPEG” to “MPEG” 
in AUDIO SETUP (page 72). Otherwise, no 
sound or a loud noise will come from your 
speakers.

• The TVS effects of this player cannot be used 

with this connection.

• In order to listen to DTS sound tracks, you must 

use this connection. DTS sound tracks are not 
output through the LINE OUT L/R (AUDIO) 
jacks, even if you set “DTS” to “ON” in Quick 
Setup (page 20).

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

Coaxial cord

Optical cord

Plug the player and TV mains lead (power cord) into a mains.

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press 

>. To return to the previous adjustment, press .. The on-

screen displays differ depending on the player model.

[/1.

“Press [ENTER] to run QUICK SETUP” 
(press enter to run Quick Setup) appears 
at the bottom of the screen. If this 
message does not appear, select 
“QUICK” (quick) under “SETUP” 
(setup) in the Control Menu to run Quick 
Setup (page 68).

The Setup Display for selecting the 
language used in the on-screen display 
appears.
The available languages differ depending 
upon the player model.

X/x to select a language.

The player displays the menu and 
subtitles in the selected language.

ENTER

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

CHINESE1

ENGLISH
ENGLISH

CHINESE2

THAI

The Setup Display for selecting the 
aspect ratio of the TV to be connected 
appears.

X/x to select the setting that 

◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 69)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 

(page 69)

The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.

X/x to select the type of jack 

If you did not connect an AV amplifier 
(receiver), select “NO,” then go to step 
13.
If you connected an AV amplifier 
(receiver) using just an audio cord, select 
“YES: LINE OUTPUT L/R (AUDIO),” 
then go to step 13.
If you connected an AV amplifier 
(receiver) using either a digital optical or 
coaxial cord, select “YES: DIGITAL 
OUTPUT.” 

X/x to select the type of 

If your AV amplifier (receiver) has a 
Dolby Digital decoder, select “DOLBY 
DIGITAL.” Otherwise, select “D-PCM.”

“DTS” is selected.

X/x to select whether or 

If your AV amplifier (receiver) has a 
DTS decoder, select “ON.” Otherwise, 
select “OFF.”

Quick Setup is finished and connections 
are complete.
If your AV amplifier (receiver) has an 
MPEG audio decoder, set “MPEG” to 
“MPEG” (page 72).

SCREEN SETUP

TV TYPE:

16:9

4:3 LETTER BOX

4:3 PAN SCAN

FULL

COLOR SYSTEM (VIDEO CD):

BACKGROUND:

SCREEN SAVER:

4:3 OUTPUT:

16:9

YES

NO

Is this player connected to an 
amplifier (receiver) ? Select the type 
of jack you are using.

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

DTS:

DOLBY DIGITAL

48kHz/96kHz PCM:

48kHz/16bit

D-PCM

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

PCM

DTS:
48kHz/96kHz PCM:

OFF
OFF

ON

Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.

[/1.

The player turns on.

◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.

A on the player, and place a 

To place other discs on the tray, press 
DISC SKIP and place the discs in the 
order you want to play them.
Each time you press DISC SKIP, the disc 
tray turns so you can place the discs on 
the empty compartments. The player 
plays from the last disc placed on the tray.

H.

The disc tray closes. The player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 26. For VIDEO CDs, 
see page 27.

To turn off the player
Press

 [/1. The player enters standby mode.

z Hint
You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn this function on or off, set 
“AUTO POWER OFF” in “CUSTOM SETUP” to 
“ON” or “OFF” (page 70).

Discs created on DVD recorders must be correctly 
finalized before they can be played. For more 
information about finalizing, refer to the operating 
instructions supplied with the DVD recorder.

Notes on playing DTS sound tracks on a 
DVD VIDEO
• DTS audio signals are output only through 

the DIGITAL OUT (COAXIAL or 
OPTICAL) jack.

• When you play a DVD VIDEO with DTS 

sound tracks, set “DTS” to “ON” in 
“AUDIO SETUP” (page 73).

• If you connect the player to audio 

equipment without a DTS decoder, do not 
set “DTS” to “ON” in “AUDIO SETUP” 
(page 73). A loud noise may come out from 
the speakers, affecting your ears or causing 
the speakers to be damaged.

DISC SKIP

DISC SKIP

ENTER

RETURN

Playback side 
facing down

Disc 
compartment 
number

1-6

*

1

DVD VIDEOs/DVD-RWs/DVD-Rs only. The 
button cannot be used for DivX video files.

*

2

DVD VIDEOs/DVD-RWs/DVD-Rs/
DVD+RWs/DVD+Rs only. The button cannot 
be used for DivX video files.

*

3

Video and JPEG pictures only (except 
BACKGROUND pictures). You can move the 
enlarged picture using 

C/X/x/c. Depending 

upon the contents of the disc, the zoom function 
may be cancelled automatically when the 
picture is moved.

You may not be able to use the Replay or Advance 
function with some scenes.

You can listen to dialogue or sound while 
playing the current scene quickly or slowly.

During playback, press FAST PLAY or 
SLOW PLAY.
The speed changes when you press either 
FAST PLAY or SLOW PLAY.

To return to normal playback
Press 

H.

• You can only use this function with DVDs/

VIDEO CDs/Super VCDs and DVD-RWs/DVD-
Rs in VR mode only.

• “Operation not possible” will appear when 

maximum or minimum speed is reached.

• During Fast Play or Slow Play mode, you cannot 

change the angle (page 49), subtitle (page 49) and 
sound (page 45). The sound can only be changed 
for VIDEO CDs/Super VCDs.

• Fast Play and Slow Play functions do not work 

when playing DTS sound tracks.

• You cannot use Fast Play or Slow Play functions 

when playing a still picture on DVD-RW/DVD-R 
in VR mode.

Select a disc

Press DISC 1-5 on the 
player

Stop

Press 

x

Pause

Press 

X

Resume play after 
pause

Press 

X or H

Go to the next disc

Press DISC SKIP

Go to the next chapter, 
track, or scene in 
continuous play mode

Press 

>

Go back to the 
previous chapter, 
track, or scene in 
continuous play mode

Press 

.

Stop play and remove 
the disc

Press 

Z

Replay the previous 
scene*

1

Press  

(replay) 

during playback

CLEAR

(replay)

ZOOM

SLOW PLAY

FAST PLAY

DISC SKIP

(advance)

DISC SKIP

DISC 1-5

CLEAR

(replay)

ZOOM

SLOW PLAY

FAST PLAY

DISC SKIP

(advance)

Briefly fast forward 
the current scene*

2

Press
(advance) during 
playback

Magnify the image*

3

Press ZOOM 
repeatedly. Press 
CLEAR to cancel.

,continued

You can open the disc tray while playing a 
disc so that you can check which discs are to 
be played next and replace discs without 
interrupting playback of the current disc.

Press EXCHANGE.
The disc tray opens and two disc 
compartments appear. Even if the player 
is playing a disc, it doesn’t stop playing.

Press DISC SKIP.
The disc tray turns and another two disc 
compartments appear.

Press EXCHANGE.
The disc tray closes.

z Hint
While the disc tray is open,
– If the playback of the current disc end, the player 

stops playing. If the disc is played in One Disc 
Repeat Play mode (page 30), the current disc 
starts playing again.

– In Shuffle Play mode (page 29), titles/tracks/

chapters are reshuffled only on the current disc.

– In Program Play mode (page 28), the titles/tracks/

chapters only on the current disc are played.

Do not push the disc tray to close in step 5, as you 
may damage the player.

You can lock the disc tray to prevent children 
from opening it.

When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 on the 
remote.
The player turns on and “LOCKED” appears 
on the front panel display. The 

A

 and 

EXCHANGE buttons on the player and the 

Z

button on the remote do not work while the 
Child Lock is set.

To unlock the disc tray
When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 again.

Even if you select “RESET” under “SETUP” in the 
Control Menu (page 68), the disc tray remains 
locked.

EXCHANGE

DISC SKIP

DISC SKIP

The player stores the point where you stopped 
the disc for up to 6 discs and resumes 
playback the next time you insert the same 
disc. If you store a resume playback point for 
the seventh disc, the resume playback point 
for the first disc is deleted.

x to 

“RESUME” appears on the front panel 
display.

H.

The player starts playback from the point 
where you stopped the disc in step 1.

z Hint
To play from the beginning of the disc, press 

x

twice, then press 

H.

• “MULTI-DISC RESUME” in “CUSTOM 

SETUP” must be set to “ON” (default) for this 
function to work (page 71).

• The point where you stopped playing is cleared 

when:

– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs/DVD-Rs in VR mode, CDs, 

DATA CDs, and DATA DVDs, the player 
remembers the resume playback point for the 
current disc.
The resume point is cleared when:

– you press DISC SKIP or DISC 

1–5.

– you opened the disc tray.
– you disconnect the mains lead.
– the player enters standby mode (DATA CD/

DATA DVD only).

• Resume Play does not work during Shuffle Play 

and Programme Play.

• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM 

SETUP” is set to “ON” and you playback a 
recorded disc such as DVD-RW, the player may 
playback other recorded discs from the same 
resume point. 

A DVD is divided into long sections of a 
picture or a music feature called “titles.” 
When you play a DVD which contains 
several titles, you can select the title you want 
using the TOP MENU button.
When you play DVDs that allow you to select 
items such as language for the sound and 
subtitles, select these items using the MENU 
button.

The disc’s menu appears on the TV 
screen.
The contents of the menu vary from disc 
to disc.

C/X/x/c or the number 

If you press the number buttons, the 
following display appears.
Press the number buttons to select the 
item you want.

Some DVD-RWs/DVD-Rs in VR (Video 
Recording) mode have two types of titles for
playback: originally recorded titles (ORIGINAL) 
and titles that can be created on recordable 
DVD players for editing (PLAY LIST). You 
can select the type of title to be played.

The Control Menu appears.

X/x to select 

The options for “ORIGINAL/PLAY 
LIST” appear.

X/x to select a setting.

• PLAY LIST: plays the titles created 

from “ORIGINAL” for editing.

• ORIGINAL: plays the titles originally 

recorded.

ENTER

MENU

TOP MENU

Number 
buttons

1

ENTER

DISPLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

1

DVD-VR

PLAY LIST

PLAY LIST

ORIGINAL

T

 1 : 3 0 : 5 0

1-7

PBC (Playback Control) allows you to play 
VIDEO CDs interactively by following the 
menu on the TV screen.

The menu for your selection appears.

Refer to the instructions supplied with the 
disc, as the operating procedure may 
differ depending on the VIDEO CD.

To return to the menu
Press 

O RETURN.

z Hint
To play without using PBC, press 

./> or the 

number buttons while the player is stopped to select 
a track, then press

 H or ENTER.

“Play without PBC” appears on the TV screen and 
the player starts continuous play. You cannot play 
still pictures such as a menu.
To return to PBC playback, press 

x twice then 

press 

H.

Depending on the VIDEO CD, “Press ENTER” in 
step 3 may appear as “Press SELECT” in the 
instructions supplied with the disc. In this case, 
press

 H.

ENTER

RETURN

Number 
buttons

You can set the following play modes:
• Programme Play (page 28)
• Shuffle Play (page 29)
• Repeat Play (page 30)
• A-B Repeat Play (page 31)

The play mode is cancelled when:
– you open the disc tray.
– the player enters standby mode by pressing 

[/1.

You can play the contents of a disc in the 
order you want by arranging the order of the 
titles, chapters, or tracks on the disc to create 
your own programme. You can programme 
up to 99 titles, chapters, and tracks.

Press DISPLAY.
The Control Menu appears.

X/x to select 

(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.

X/x to select “SET

t

c.

The cursor moves to the title or track row 
“T” (in this case, “01”).

Select the title, chapter, or track you 
want to programme.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title 
“02.”
Press

X/x to select “02” under “T,” then 

press ENTER.

CLEAR

ENTER

DISPLAY

OFF
OFF
SET
ON

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

1

T

 1 : 3 2 : 5 5

DVD VIDEO

PROGRAM

1. TITLE

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

T

– –

01
02
03
04
05

“TRACK” is displayed when you play 
a VIDEO CD, or CD.

Titles or tracks 
recorded on a disc

PROGRAM

1. TITLE – –

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

T

C

ALL

01
02
03
04
05
06

– –

02
03
04
05

01

Chapters recorded on a disc

PROGRAM

1. TITLE – –

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

C

ALL

03
04
05
06

T

– –

01
02
03
04
05

02

01

Next, press 

X/x to select “03” under “C,” 

then press ENTER.

◆ When playing a VIDEO CD, or CD
For example, select track “02.”
Press

X/x to select “02” under “T,” then 

press ENTER.

To programme other titles, chapters, 
or tracks, repeat steps 4 to 5.
The programmed titles, chapters, and 
tracks are displayed in the selected order.

H to start Programme Play.

Programme Play begins.
When the programme ends, you can 
restart the same programme again by 
pressing

H.

To return to normal play
Press CLEAR, or select “OFF” after step 2. 
To play the same programme again, select 
“ON” in step 3 and press ENTER.

Follow steps 1 to 3 of “Creating your 
own programme (Programme Play).”

Select the programme number of the title, 
chapter, or track you want to change or 
cancel using 

X/x and press c. If you 

want to delete the title, chapter, or track 
from the programme, press CLEAR.

Follow step 5 for new programming. To 
cancel a programme, select “--” under 
“T,” then press ENTER.

Follow steps 1 to 3 of “Creating your own 
programme (Programme Play).”

Press

X and select “ALL CLEAR.”

Press ENTER.

z Hint
You can perform Repeat Play or Shuffle Play of 
programmed titles, chapters, or tracks. During 
Programme Play, follow the steps of Repeat Play 
(page 30) or Shuffle Play (page 29).

• All Discs Repeat is automatically changed into 

One Disc Repeat when you set to programme play 
mode (page 30). You can only programme the 
contents of the current disc.

• When you programme tracks on a Super VCD, the 

total playing time is not displayed.

• You cannot use this function with VIDEO CDs or 

Super VCDs with PBC playback.

You can have the player “shuffle” titles, 
chapters, or tracks. Subsequent “shuffling” 
may produce a different playing order.

Press DISPLAY during playback.
The Control Menu appears.

X/x to select 

(SHUFFLE), then press ENTER.
The options for “SHUFFLE” appear.

X/x to select the item to be 

shuffled.
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER

T

– –

01
02
03
04
05

PROGRAM

1. TITLE  0 2 – 0 3

ALL CLEAR

2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –

Selected title and chapter

Selected track

Set:                                  Quit: 

ENTER

Start:

PLAY

PROGRAM

1. TRACK        0 2

ALL CLEAR

2. TRACK

– –

3. TRACK

– –

4. TRACK

– –

5. TRACK

– –

6. TRACK

– –

7. TRACK

– –

0:15:30

– –

01
02
03
04
05

T

DISPLAY

Total time of the programmed tracks

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

1

T

 1 : 3 2 : 5 5

OFF

CHAPTER

TITLE

OFF

DVD VIDEO

,continued

◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks 

selected in Programme Play.

Press ENTER.
Shuffle Play starts.

To return to normal play
Press CLEAR, or select “OFF” in step 3.

z Hints
• You can set Shuffle Play while the player is 

stopped. After selecting the “SHUFFLE” option, 
press 

H. Shuffle Play starts.

• Up to 200 chapters in a disc can be played in 

random order when “CHAPTER” is selected.

• You cannot use this function with VIDEO CDs or 

Super VCDs with PBC playback.

• All Discs Repeat is automatically changed into 

One Disc Repeat when you set to shuffle play 
mode. You can only shuffle the contents of the 
current disc.

You can play all of the titles or tracks on a 
disc, or a single title, chapter, or track 
repeatedly.
You can use a combination of Shuffle or 
Programme Play modes.

Press DISPLAY during playback.
The Control Menu appears.

X/x to select 

(REPEAT), then press ENTER.
The options for “REPEAT” appear.

X/x to select the item to be 

◆ When playing a DVD VIDEO
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles on 

the current disc.

• TITLE: repeats the current title on a disc.
• CHAPTER: repeats the current chapter.
◆ When playing a DVD-VR mode disc
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles of 

the selected type.

• TITLE: repeats the current title on a 

disc.

• CHAPTER: repeats the current chapter.
◆ When playing a VIDEO CD, or CD
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the tracks on 

the current disc.

• TRACK: repeats the current track.
◆ When playing a DATA CD/DATA DVD 
with MP3 audio tracks or JPEG image 
files
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the albums on 

the current disc.

• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only): 

repeats the current track.

• FILE (DivX video files only): repeats 

the current file.

◆ When Programme Play or Shuffle Play 
is activated
• ON: repeats Programme Play or 

Shuffle Play.

Press ENTER.
Repeat Play starts.

To return to normal play
Press CLEAR, or select “OFF” in step 3.

z Hint
You can set Repeat Play while the player is stopped. 
After selecting the “REPEAT” option, press 

H.

Repeat Play starts.

• You cannot use this function with VIDEO CDs or 

Super VCDs with PBC playback.

• When repeating a DATA CD/DATA DVD which 

contains MP3 audio tracks and JPEG image files, 
and their playing times are not the same, the sound 
will not match the image.

• When “MODE (MP3, JPEG)” is set to “IMAGE 

(JPEG)” (page 58), you cannot select “TRACK.”

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

1

T

 1 : 3 2 : 5 5

OFF
ALL DISCS
ONE DISC

OFF

DVD VIDEO