DOWNLOAD Sony BDP-CX960 Service Manual ↓ Size: 6.28 MB | Pages: 112 in PDF or view online for FREE

 Diag

 Diag

Mechanism cannot be operated if it does not initialize it when the 
message of “Initialize fi rst, please.” is displayed.
The message of “Initialize fi rst, please.” disappears when initial-
ization is done.

The sensor display is always updated.
DISC Sensor: “0” or “1” is displayed.
TABLE Sensor: “0” or “1” is displayed.
LOAD Sensor:  The state is displayed (“Released”, “Release 

↔ 

Lock”, “Table Locked” or “Chucked”).

DOOR Sensor: The state is displayed (“Opened”, “Moving”, 

“Closed”, “Opened/Popper Up”, “Opened/Popper 
Moving” or “Opened/Popper Down”).

Mechanism can be operated by pressing the button of the corre-
sponding remote commander.
[0] 

The initialization of mechanism is executed.

[1] 

The door opens and pop up when the door 
closes. The pop up when the door opens and 
not pop up. The pop down when the door 
opens and pop up.

[OPEN/CLOSE] 

The door is opened or closed.

[PREV 

.

] 

One slot is rotated to the left (when the door 
closes, it opens) (when the chucking, it chuck 
down).

[NEXT 

>

] 

One slot is rotated to the right (when the door 
closes, it opens) (when the chucking, it chuck 
down).

[

m

] 

One rotation to the left (when the door closes, 
it opens) (when the chucking, it chuck down).

[

M

] 

One rotation to the right (when the door 
closes, it opens) (when the chucking, it chuck 
down).

[

N

] 

Disc at the position of the drive is downed in 
the chuck or the chucking.

1-6. Log
Operation:
[1] 

Moves to the Error Log screen.

[2] 

Moves to the Command Log screen.

[

M

]/[

m

] 

Moves the cursor.

[

3

] 

Moves to the item selected with the cursor.

[RETURN]  Returns to the top menu of the service mode.

 Select Log

The page is changes if the [

<

]/[

,

] buttons are pressed on the 

screen where the log was displayed.
Press the [RETURN] button to return from the log display.

1-7. Factory Initialize
Data base, remote control mode, password and other setting value 
are initialized, Gracenote relation fi le is deleted.
Operation:
Press the [

3

] button in this screen when restoring the set to its 

factory settings.
[

3

] 

Initialize the set to its factory settings.

[RETURN]  Return to the top menu of the service mode.

 Factory Initialize

1-8. Ship Mode
Changer Mechanism is changed to the ship mode.
Eject all disc in the table before it enters this mode.
Operation:
Press the [

3

] button in this screen when setting the chucking 

down, turn table free and door closed, and turn the power off.
[

3

] 

Changes to the ship mode.

[RETURN]  Return to the top menu of the service mode

 Ship Mode

1-9. Network
Display of network information.
Operation:
[

<

]/[

,

]  Selects the Ifconfi g or Ping.

[

3

] 

Executes the information display.

[

M

] 

Returns to selection of test category.

 

Moves the cursor.

[

m

] 

Moves the cursor.

[RETURN]  Return to the top menu of the service mode

 Network

Ifconfi g: Display of network information
Ping: IP that transmits ping is set and it transmits.

Ping input display

[ENT]/[RET] 

Input Ping is released.

[LEFT] 

Select the Ifconfi g.

[(NUM)]/[TIME] IP address for Ping is input.
[CLEAR] 

Back space of one input IP address.

Display of system information.

Operation:
[

3

] Measures 

ΔIOP of the drive (takes a few seconds: 

1time only)

[RETURN]  Returns to the top menu of the service mode

Displayed contents: 
Model name: Model
Destination: Dest
IP address: IP
Mac address: Mac
CPU version: CPU 

← [Firm Version] [Generation Version]

NBL version: NBL
Kernel version: Kernel
Host version: Host 

← [Host Version] [Release Version]

Optical disc drive: Drive 

← [Model] [Firm Revision] 

 [Serial 

Number]

Drive usage time: LDTime 

← [Media]: [LDTime]/[ΔIOP]/

 

ΔIOP/ΔIOP

ΔIOP temperature measurement : dIOP_TEMP
IFCon version: IFCon 

← [Ifcon Version]

IFCon Firm date: FirmDate
Set temperature: Temp 

← [°C]

 System Information

ERRLOG_

CATEGORY_

THERMO

Shutdown due to 

temperature rise of 

the set

FAN ERR

0x05

0x01

Check the ambient temperature of 
the set

FAN is defective

FAN ERR

0x02

Replace the fan

ERRLOG_

CATEGORY_

NVRAM

NAND Error

E7001

0x07

0x01

Reboot the set, and if the error 
recurs or if the set malfunctions, 
perform the service. (When the error 
persists though NVRAM is forcibly 
initialized, replace the NAND. All the 
data in NVRAM including the setting 
information are initialized)

E7002

0x02

E7003

0x03

E7004

0x04

E7005

0x05

Reboot the set for automatic recov-
ery. If the error recurs, perform the 
service. (When the error persists 
though NVRAM is forcibly initialized, 
replace the NAND. All the data in 
NVRAM including the setting infor-
mation are initialized)

E7006

0x06

E7007

0x07

E7008

0x08

E7009

0x09

E7010

0x0A

E7011

0x0B

NAND 

(SdmRegistry) 

Error

E7101

0x65

Reboot the set and if the error oc-
curs, perform the service. (Replace 
the NAND because it reached the 
life)

E7102

0x66

E7103

0x67

E7104

0x68

E7105

0x69

N/A

NAND (Database) 

Error

E9101

No error log is recorded.

Reboot the set, and if the error 
recurs, perform the service. (When 
the error persists though the “Fac-
tory Initialize” is done, replace the 
NAND. All the data including setting 
information are initialized)

E9102

E9103

E9104

ERRLOG_

CATEGORY_

MECHA

Mechanism 

error that cannot be 

specifi ed

E8000

0x09

0x00

Mechanical error. Check the each 
motion and perform the service.

Fails the door 

close in initializing 

mechanism

E8001

0x01

Check the door mechanism. (Gear 
alignment, switch condition, Assem-
bly of the door guide rail) 

Makes an error 

while the table is 

operating

E8002

0x02

Check the sensor alignment. (espe-
cially the table sensor alignment)/
Check the table mechanism. (As-
sembly of gears, teeth of Table (400) 
for sensor)

Makes an error 

while the loading is 

operating

E8003

0x03

Check the loading mechanism and 
perform the service.

Makes an error 
while Popper is 

operating

E8004

0x04

Check the pop-up mechanism. 
(especially POP-UP lever alignment) 
And check the door mechanism. 
(Pop-Up is common mechanism with 
door’s)

N/A

Drive Tray Error

E8902

No error log is recorded.

Reboot the set, and if the error 
recurs, perform the service. (Check 
optical drive)

J-6090-199-A

BLX-104

Single Layer

J-6090-200-A

BLX-204

Dual Layer

3-702-101-01

CD (YEDS-18)

J-6090-088-A

HLX-504

Single Layer (NTSC)

J-6090-089-A

HLX-505

Dual Layer (NTSC)

J-6090-077-A

HLX-506

Single Layer (PAL)

J-6090-078-A

HLX-507

Dual Layer (PAL)

Note: Refer to the service manual of BDP-BX1/S350 (Part No. 9-883-

989-1[]) (page 1-3 to 1-14E) for the use of BLX-104/204.

1. BLX-104
Procedure:
1. Select 

23.976Hz/1080p.

2.  Play “4.Motion picture”.
3.  Check whether player can play back or not.
4.  Check each outputs.
 Video:
 Composite/S 

Video/component/HDMI.

 Audio:
 Speaker 

out.

*  When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) 

can use instead of 1080/24p.

 

However this is temporary correspondence.

*  When the output of HDMI is 1080p, the signal of Composite/S 

Video/Component are not output.

 

It is necessary to lower the output of HDMI to 1080i or less.

2. BLX-204
Procedure:
1.  Select 1080i (59.94Hz or 50Hz).
2.  Play “4.Motion picture”.
3.  Check whether player can play back or not.
 

(Check the picture and sound output)

3. CD (YEDS-18)
Procedure:
Check whether player can play back or not.
(Check the sound output)

4.  HLX-504/505 (NTSC), HLX-506/507 (PAL)
Procedure:
1.  After displayed Main Menu, select “1.Video signal”.
2.  Play “1.Color bar 100%”.
 

(Check the picture and sound output)

3.  Return to Menu.
4.  Play “Demonstration 4:3” or “Demonstration 16:9”.
 

(Check the picture and sound output)

4-1-2.  Playback operation confi rmation
Confi rm operation in each signal/output mode of test disc (BLX-
104/204) according to the content of the repair.

Note: “AV Sync.” doesn’t operate.