Sony BDP-CX960 Service Manual ▷ View online
BDP-CX960
17
2-18. BASE (CDM BD) BLOCK
2-19. MOTOR (400 BD) ASSY (LOADING) (M301)/(TABLE) (M302), MLD BOARD
4 twelve screws (BVTP3 u 8)
5 base (CDM BD) block
1 screw (PSW3 u 8)
3 screw (PSW3 u 8)
2 shaft (pole)
5 motor (400 BD) assy
(table)
(M302)
6 MLD board
4 motor (400 BD) assy (loading)
(M301)
1 two belts (BD)
2 three screws (BVTP3 u 8)
3 two solders
3 two solders
BDP-CX960
18
2-20. SLK BOARD, SLD BOARD
claws
Note for installation
When installing the
SLK board and SLD boards,
align the leads position as shown.
SLK board and SLD boards,
align the leads position as shown.
SLK board
SLD board
leads position
A
B
1 Rotate the gear (pulley BD) in the
direction of the arrow A fully.
3 Rotate the gear (pulley BD) in the
direction of the arrow B fully.
2 screw (BVTP3 u 8)
4 screw (BVTP3 u 8)
0 screw (BVTP3 u 8)
5 SLK board
qa SLD board
6 belt (BD)
7 screw (PWH2)
base (CDM BD) block
8 gear (pulley BD)
9 gear (center BD)
BDP-CX960
19
SECTION 3
TEST MODE
1. BD SERVICE MODE
Note: The operation in this mode must use a remote commander.
1-1. Setting method of the BD service mode:
1. It is confi rmed that the AC power cord is pulled out.
2. Press the [
1. It is confi rmed that the AC power cord is pulled out.
2. Press the [
x
], [OPEN/CLOSE] and [DISC EJECT] buttons, next the AC power cord is inserted.
3. The message “SERVICE MODE” appears on the fl uorescent indicator tube and enter the BD service mode (it keeps pressing the buttons
until the message is displayed).
1-2. Menu composition
1. Diag (test function)
2. Log (log display)
3. Factory Initialize (returns to the state of the factory shipment)
4. Ship Mode (ship mode setting and power off)
5. Network (network information display)
6. System Information (system information display)
1-3. Menu tree
1. Diag (test function)
2. Log (log display)
3. Factory Initialize (returns to the state of the factory shipment)
4. Ship Mode (ship mode setting and power off)
5. Network (network information display)
6. System Information (system information display)
1-3. Menu tree
Service Mode Menu
Diag
Log
Factory Initialize
Ship Mode
Network
System Information
Device Test
Audio Video Test
Changer Mecha Test
Error Log
Command Log
Ifconfig
Ping
USB Host
D/A Converter
Ifcon
Initialize
Popper Up/Down
Open/Close
Turn Left
Turn Right
Turn Around Left
Turn Around Right
Chuck/Unchuck
FDP All ON
Show Strings
LED Sequential ON
Fan Control ON
* Cursor is not displayed when the menu is fi rst displayed.
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Ship Mode
[5] Network
[6] System Information
[3] Factory Initialize
[4] Ship Mode
[5] Network
[6] System Information
HELP : [DOWN] [ENT] [(NUM)]
HELP (currently available keys, etc.) is displayed
[1] Diag
1-4. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen.
[2]
Moves to Log screen.
[3]
Moves to Factory Initialize screen.
[4]
Moves to Ship Mode screen.
[5]
Moves to Network screen.
[6]
Moves to System Information screen.
[
M
]/[
m
]
Moves the cursor.
[
3
]
Moves to the screen of the item selected with the cursor.
BDP-CX960
20
1-5-3. Ifcon (Device Test)
Diag
Category: Device Test
Device:
Device:
Key
:
Dial
: 0
FDP All ON
Show Strings
LED Squential ON
Fan Control ON
Show Strings
LED Squential ON
Fan Control ON
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
Ifcon
Key: Display corresponding to pressed button.
Dial: Absolute value display of jog dial.
FDP All ON: All segments in fl uorescent indicator tube is lighted up.
Show Strings: The test character is displayed in the character
Dial: Absolute value display of jog dial.
FDP All ON: All segments in fl uorescent indicator tube is lighted up.
Show Strings: The test character is displayed in the character
string of fl uorescent indicator tube.
LED Sequential ON: LED is lighting.
Fan Control ON: Operation on/off switch of fan. The display of
Fan Control ON: Operation on/off switch of fan. The display of
“Fan Control ON” changes into “Fan Control
OFF” if fan is turned on.
OFF” if fan is turned on.
1-5-4. Audio Video Test (Audio Video Test)
Diag
Category:
Diag
Category: Audio Video Test
HELP: [UP] [ENT] [RET]
Audio Video Test
[ENT] Gen. TONE & Color Bar
(Screen 1)
(Screen 2)
The color bar output and the tone output.
1-5. Diag
Screen 1: Selects the test category
Operation:
[
Screen 1: Selects the test category
Operation:
[
<
]/[
,
] Selects the category.
[
m
]/[
3
]
Moves to the selected category.
[RETURN] Moves to the top menu of the service mode.
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test.
[
3
]
Executes the test.
[
M
]/[RETURN] Returns to selection of test category.
Moves the cursor.
[
m
]
Moves the cursor.
• List of test categories
Device Test
Audio Video Test
Changer Mecha Test
Device Test
Audio Video Test
Changer Mecha Test
1-5-1. USB Host (Device Test)
Diag
Category:
Diag
Category: Device Test
Device:
Device:
USB Media check
...
NG
Register Read Check ... OK
Register Read Check ... OK
Register Read Check ... OK
Cannot excute again!
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
USB Media Check: USB media detection check.
Register Read Check: The value of the register of the device is read.
Register Read Check: The value of the register of the device is write.
Register Read Check: The value of the register of the device is read.
Register Read Check: The value of the register of the device is write.
1-5-2. D/A Converter (Device Test)
Diag
Category: Device Test
Device:
Device:
DAC 2 [ch] Check
... OK
[ENT] Test Start
HELP: [LEFT] [RIGHT] [UP] [ENT] [RET]
D/A Converter
Dac 2 [ch] Check: 2ch D/A converter test.
Click on the first or last page to see other BDP-CX960 service manuals if exist.