Sony AVD-S500ES Service Manual ▷ View online
17
AVD-S500ES
SECTION 4
TEST MODE
[Jog Volume Mode]
* Master Volume Check.
Procedure:
1.
Procedure:
1.
Press the
[POWER]
button to turn the set on.
2.
To enter the test mode, press the three buttons X ,
[A.F.D]
and
Z simultaneously.
3.
The message “JOG 0” is displayed.
4.
“JOG 0” value increases like +1, +2, +3 ... if rotating the
[VOLUME]
knob clockwise, or it decreases like -1, -2, -3, ... if
rotating counter-clockwise.
5.
To exit from this mode, press the
[POWER]
button to turn the
set off.
[Key Check Mode]
* Keyboard check.
Procedure:
1.
Procedure:
1.
Press the
[POWER]
button to turn the set on.
2.
To enter the test mode, press three buttons X ,
[PRESET ]
and Z simultaneously.
3.
In the key check mode, the fluorecent indicator displays
“KEYNUM 0”. Each time a button (without the
“KEYNUM 0”. Each time a button (without the
[POWER]
button) is pressed, “KEYNUM 0” value increases. However,
once a button is pressed, it is no longer taken into account.
once a button is pressed, it is no longer taken into account.
4.
To exit from this mode, press the
[POWER]
button to turn the
set off.
[Display Test Mode and Version Display Mode]
* Fluorescent segments and LEDs are tested when this test is
activated.
Procedure:
1.
1.
Press the
[POWER]
button to turn the set on.
2.
To enter the test mode, press the three buttons X ,
[DISPLAY]
and Z simultaneously.
3.
All segments turn on and all LEDs turn on.
( MULTI CHANNEL DECODING LED (blue))
( MULTI CHANNEL DECODING LED (blue))
4.
Press the > button and confirm the display and all LEDs
turn on.
turn on.
5.
Press the > button and confirm the display and all LEDs
turn off.
turn off.
6.
Press the > button and confirm all segments and all LEDs
turn off.
turn off.
7.
Press the > button and the message “MCD_LED ON” is
displayed and “MULTI CHANNEL DECODING” LED turn
on.
displayed and “MULTI CHANNEL DECODING” LED turn
on.
8.
Press the > button and the message “LED OFF” is displayed
and all LEDs turn off.
and all LEDs turn off.
9.
Press the > button. All segments turn on and all LEDs turn
on just the same as 3.
on just the same as 3.
10. By pressing the . button and the message “AVD-S500ES”
is displayed.
11. Press the . button and the message “Dest <000>” is
displayed.
12. Press the . button and the message “STRµ #,##” is
displayed.
13. Press the . button and the message “DVDµ #,##” is
displayed.
14. To exit from this mode, press the
[POWER]
button to turn the
set off.
[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure:
1.
disc in the store is equipped.
Setting Procedure:
1.
Press the
[POWER]
button to turn the set on.
2.
Press two buttons of x and Z simultaneously for five seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure:
1.
1.
Press two buttons of x and Z simultaneously for five seconds
again.
again.
2.
The message “UNLOCKED” is displayed and the tray is
unlocked.
unlocked.
Note:
When “LOCKED” is displayed, the tray lock is not released by turning
power on/off with the
power on/off with the
[POWER]
button.
[SHIPMENT Mode]
* The All Clear clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
set to the customer.
Procedure:
1.
1.
Press the
[POWER]
button to turn the set on.
2.
To enter the test mode, press the three buttons
[MODE]
,
[PRESET+]
and Z simultaneously.
3.
The LCD displays the message “SHIP MODE”.
4.
Press the G button.
5.
The LCD displays the message “FINISHED!” and the set is
reset.
reset.
6.
To exit from this mode, press the
[POWER]
button to turn the
set off.
–
18
AVD-S500ES
[DVD OSD TEST MODE]
[GENERAL DESCRIPTION]
[GENERAL DESCRIPTION]
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
[TEST DISC LIST]
Use the following test disc on test mode.
TDV-520CSO (DVD-SL) : PART No. J-2501-236-A
LUV-P01 (CD)
TDV-520CSO (DVD-SL) : PART No. J-2501-236-A
LUV-P01 (CD)
: PART No. 4-999-032-01
TDV-540C (DVD-DL)
: PART No. J-2501-235-A
Note:
Do not use exiting test disc for DVD.
[STARTING TEST MODE]
1.
Press the
[POWER]
button to turn the power on, and set the
function to DVD.
2.
While pressing the
x
and
Z
button, turn the
[VOLUME]
knob clockwise to enter the test mode.
3.
It displays “SERVICE IN” on the fluorescent indicator tube,
and displays the Test Mode Menu on the monitor screen as
follows. (At the bottom of the menu screen, the model name
and revision number are displayed)
and displays the Test Mode Menu on the monitor screen as
follows. (At the bottom of the menu screen, the model name
and revision number are displayed)
Test Mode Menu
0. Syscon Diagnosis
1. Drive Auto Adjustment
2. Drive Manual Operation
3. Mecha Aging
4. Emergency History
5. Mecha Error History
6. Version Information
7. Video Level Adjustment
Exit: POWER Key
Model :AVD-S500ES UC
Revision :x.xx
4.
To execute each function, select the desired menu and press its
number on the remote commander (RM-SP500).
number on the remote commander (RM-SP500).
5.
To release from test mode, press the
[POWER]
button and turn
the power off.
[OPERATING TEST MODE]
0.
SYSCON DIAGNOSIS
The same contents as board detail check by serial interface can be
checked from the remote commander operation.
On the Test Mode Menu screen, press
checked from the remote commander operation.
On the Test Mode Menu screen, press
[10/0]
key on the remote
commander, and the following Check Menu will be displayed.
### Syscon Diagnosis ###
Check Menu
0. Quit
1. All
2. Version
3. EEPROM
4. GPIO
5. SD Bus
6. Video
8. ExVideo Encoder
0-0. Quit
Quit the Syscon Diagnosis and return to the Test Mode Menu.
0-1. All (All items continuous check)
This menu checks all diagnostic items continuously. Normally, all
items are checked successively one after another automatically
unless an error is found, but at a certain item that requires judgment
through a visual check to the result, the following screen is displayed
for the key entry.
items are checked successively one after another automatically
unless an error is found, but at a certain item that requires judgment
through a visual check to the result, the following screen is displayed
for the key entry.
• Example display
### Syscon Diagnosis ###
Diag All Check
No.2 Version
2-3. ROM Check Sum
Check Sum = A658
Press NEXT Key to Continue
Press PREV Key to Repeat
For the ROM Check, the check sum calculated by the Syscon is
output, and therefore you must compare it with the specified value
for confirmation.
Following the message, press the
output, and therefore you must compare it with the specified value
for confirmation.
Following the message, press the
>
button to go to the next
item, or press the
.
button to repeat the same operation
again.
To quit the diagnosis and return to Check Menu screen, press the
To quit the diagnosis and return to Check Menu screen, press the
[RETURN]
key on the remote commander to display Check Menu.
• Error occurred
If an error occurred, the diagnosis is suspended and error is displayed.
Press the
Press the
[RETURN]
key on the remote commander to quit the
diagnosis, or press the
.
button to repeat the same check where
an error occurred, or press the
>
button to continue the check
from the item next to faulty item.
General Description of Checking Method
Selecting 2 and subsequent items calls the submenu screen of each
item. And selecting 2 and subsequent items executes respective
menus and outputs the results.
For the contents of each submenu, see “Check Items List” as below.
item. And selecting 2 and subsequent items executes respective
menus and outputs the results.
For the contents of each submenu, see “Check Items List” as below.
Check Items List:
0-2. Version
0-2-1. All
0-2-2. Revision
0-2-3. ROM Check Sum
0-2-4. Model Type
0-2-5. Region
0-2-2. Revision
0-2-3. ROM Check Sum
0-2-4. Model Type
0-2-5. Region
0-3. EEPROM Check
0-3-1. Sampling Check
0-3-2. Detail Check
0-3-2. Detail Check
0-4. GP I/O Check
0-5. SD Bus Check
0-6. Video Check
0-8. ExVideo Encoder
0-5. SD Bus Check
0-6. Video Check
0-8. ExVideo Encoder
19
AVD-S500ES
0-2. Version
0-2-2. Revision
The revision number of ROM (IC1044) that the program
for the DVD system processor (IC1041) is stored.
for the DVD system processor (IC1041) is stored.
0-2-3. ROM Check Sum
The revision number of ROM (IC1044) that the program
for the DVD system processor (IC1041) is stored.
for the DVD system processor (IC1041) is stored.
0-2-4. Model Type
Model name is displayed. (AVD-S500ES)
0-2-5. Region
Model destination code is displayed. (2 digits number)
0-3. EEPROM Check
0-3-1. Sampling Check
EEPROM check at every 64 words.
It compares read data with write data of each address. When
there are discrepancies between two data, it displays error.
It compares read data with write data of each address. When
there are discrepancies between two data, it displays error.
0-3-2. Detail Check
EEPROM check at every 1 word.
It compares read data with write data of each address. When
there are discrepancies between two data, it displays error.
It compares read data with write data of each address. When
there are discrepancies between two data, it displays error.
0-4. GP I/O Check
Pull up/down setting check of the DVD system processor (IC1041)
pin 150, 151 and 154 (for clock setting port).
pin 150, 151 and 154 (for clock setting port).
0-5. SD Bus Check
SD bus data check between DVD decoder (IC1027) and D-RAM
(IC1030).
(IC1030).
0-6. Video Check
Output the color bars for video level adjustment.
0-8. ExVideo Encoder Check
Video Encoder Check of ADV7300 and CXD9698R.
1.
DRIVE AUTO ADJUSTMENT
On the Test Mode Menu screen, press the
[1]
key on the remote
commander, and the Adjustment Menu will be displayed.
## Drive Auto Adjustment ##
Adjustment Menu
0. ALL
1. DVD-SL
2. CD
3. DVD-DL
Exit: RETURN
Normally,
[10/0]
is selected to adjust DVD (single layer), CD and
DVD (dual layer) in this order. But, individual items can be adjusted
for the case where adjustment is suspended due to an error. In this
mode, the adjustment can be made easily through the operation
following the message displayed on the screen.
The disc used for adjustment must be the one specified for
adjustment.
for the case where adjustment is suspended due to an error. In this
mode, the adjustment can be made easily through the operation
following the message displayed on the screen.
The disc used for adjustment must be the one specified for
adjustment.
1-0. ALL
Press the
[10/0]
key on the remote commander, and the servo set
data in EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD
disc and 3. DVD-DL disc are adjusted in this order.
Each time one disc was adjusted, it is ejected. Replace it with the
specified disc following the message. You can finish the adjustment
by pressing the
disc and 3. DVD-DL disc are adjusted in this order.
Each time one disc was adjusted, it is ejected. Replace it with the
specified disc following the message. You can finish the adjustment
by pressing the
[RETURN]
button on the remote commander.
Note:
During adjustment of each disc, the measurement for disc type judg-
ment is made. As automatic adjustment does not judge the disc
type unlike conventional models, take care not to insert wrong type
discs. Also, do not give a shock during adjustment.
ment is made. As automatic adjustment does not judge the disc
type unlike conventional models, take care not to insert wrong type
discs. Also, do not give a shock during adjustment.
1-1. DVD-SL (single layer)
Press the [1] key on the remote commander and insert a DVD single
layer disc following the message. Then the adjustment will be made
through the steps below, then adjusted values will be written to the
EEPROM.
layer disc following the message. Then the adjustment will be made
through the steps below, then adjusted values will be written to the
EEPROM.
DVD Single Layer Disc Adjustment Steps:
1.
Sled tilt reset
2.
Disc check memory SL
3.
Wait 300 msec
4.
Set disc type SL
5.
LD on
6.
Spindle start
7.
Wait 1 sec
8.
Focus servo on 0
9.
Auto track offset adjust
10. CLVA on
11. Wait 500 msec
12. Tracking on
13. Wait 1 sec
14. Sled on
15. Check CLV on
16. Auto LFO adjust
17. Auto focus offset adjust
18. Auto tilt position adjust
19. Auto focus gain adjust
20. Auto focus offset adjust
21. EQ boost adjust
22. Auto loop filter offset adjust
23. Auto track gain adjust
Search Check
11. Wait 500 msec
12. Tracking on
13. Wait 1 sec
14. Sled on
15. Check CLV on
16. Auto LFO adjust
17. Auto focus offset adjust
18. Auto tilt position adjust
19. Auto focus gain adjust
20. Auto focus offset adjust
21. EQ boost adjust
22. Auto loop filter offset adjust
23. Auto track gain adjust
Search Check
24. 32 track jump forward
25. 32 track jump reverse
26. 500 track jump forward
27. 500 track jump reverse
25. 32 track jump reverse
26. 500 track jump forward
27. 500 track jump reverse
28. All servo stop
29. EEP copy loop filter offset
29. EEP copy loop filter offset
1-2. CD
Press the
[2]
key on the remote commander and insert a CD disc
following the message. Then the adjustment will be made through
the steps below, then adjusted values will be written to the EEPROM.
the steps below, then adjusted values will be written to the EEPROM.
CD Adjustment Steps
1.
Sled tilt rest
2.
Disc check memory CD
3.
Wait 500 msec
4.
Set disc type CD
5.
LD on
6.
Spindle start
7.
Wait 500 msec
8.
Focus servo on 0
9.
Auto track offset adjust
10. CLVA on
11. Wait 500 msec
11. Wait 500 msec
20
AVD-S500ES
12. Tracking on
13. (TC display start)
14. Wait 1 sec
15. Jitter display start
16. Sled ON
17. Check CLV on
18. Auto loop filter offset adjust
19. Auto focus offset adjust
20. Auto focus gain adjust
21. Auto focus offset adjust
22. EQ boost adjust
23. Auto LFO Adjust
24. Auto track gain adjust
Search Check
13. (TC display start)
14. Wait 1 sec
15. Jitter display start
16. Sled ON
17. Check CLV on
18. Auto loop filter offset adjust
19. Auto focus offset adjust
20. Auto focus gain adjust
21. Auto focus offset adjust
22. EQ boost adjust
23. Auto LFO Adjust
24. Auto track gain adjust
Search Check
25. 32Tj forward
26. 32Tj reverse
27. 500Tj forward
28. 500Tj reverse
26. 32Tj reverse
27. 500Tj forward
28. 500Tj reverse
29. All servo stop
1-3. DVD-DL (dual layer)
Press the
[3]
key on the remote commander and insert a DVD dual
layer disc following the message. Then the adjustment will be made
through the steps below, then adjusted values will be written to the
EEPROM.
through the steps below, then adjusted values will be written to the
EEPROM.
DVD Dual Layer Disc Adjustment Steps:
1.
Sled tilt reset
2.
Disc check memory DL
3.
Wait 500 msec
4.
Set disc type DL
5.
LD on
6.
Spindle start
7.
Wait 1 sec
Layer 1 Adjust
8.
Focus servo on 0
9.
Auto track offset adjust
10. CLVA on
11. Wait 500 msec
12. Tracking on
13. Wait 500 msec
14. Sled on
15. Check CLV lock
16. Auto loop filter offset adjust, Auto focus adjust
17. Auto focus gain adjust
18. Auto focus offset adjust
19. EQ boost adjust
20. Auto loop filter offset adjust
21. Auto Track Gain Adjust
Search Check
11. Wait 500 msec
12. Tracking on
13. Wait 500 msec
14. Sled on
15. Check CLV lock
16. Auto loop filter offset adjust, Auto focus adjust
17. Auto focus gain adjust
18. Auto focus offset adjust
19. EQ boost adjust
20. Auto loop filter offset adjust
21. Auto Track Gain Adjust
Search Check
22. 32 track jump forward
23. 32 track jump reverse
24. 500 track jump forward
25. 500 track jump reverse
23. 32 track jump reverse
24. 500 track jump forward
25. 500 track jump reverse
Layer 0 Adjust
26. Focus jump (L1
t L0)
27. Auto track offset adjust L0
28. CLVA on
29. Wait 500 msec
30. Tracking on
31. Wait 500 msec
32. Sled on
33. Check CLV lock
34. Auto focus filter offset adjust
35. Auto Focus Adjust
36. Auto focus gain adjust
37. Auto focus offset adjust
28. CLVA on
29. Wait 500 msec
30. Tracking on
31. Wait 500 msec
32. Sled on
33. Check CLV lock
34. Auto focus filter offset adjust
35. Auto Focus Adjust
36. Auto focus gain adjust
37. Auto focus offset adjust
38. EQ boost adjust
39. Auto Loop Filter Offset
40. Auto track gain adjust
Search Check
39. Auto Loop Filter Offset
40. Auto track gain adjust
Search Check
41. 32 track jump forward
42. 32 track jump reverse
43. 500 track jump forward
44. 500 track jump reverse
42. 32 track jump reverse
43. 500 track jump forward
44. 500 track jump reverse
Layer Jump Check
45. Layer jump (L0 ? L1)
46. Layer jump (L1 ? L0)
46. Layer jump (L1 ? L0)
47. All servo stop
2.
DRIVE MANUAL OPERATION
Note:
This mode is used for design, and not used in service fundamen-
tally.
On the Test Mode Menu screen, press the
[2]
key on the remote
commander, and the Operation Menu will be displayed. For the
manual operation, each servo on/off control and adjustment can be
executed manually.
manual operation, each servo on/off control and adjustment can be
executed manually.
## Drive Manual Operation ##
Operation Menu
1. Disc Type
2. Servo Control
3. Track/Layer Jump
4. Non EEPROM Write Adjust
5. EEPROM Write Adjust
6. Memory Check
7. Disc Check Memory
8. Error Rate Display
9. SACD Water Mark
Exit: RETURN
In using the manual operation menu, take care of the following
points. These commands do not provide protection, thus requiring
correct operation. The sector address or time code field is displayed
when a disc is loaded.
points. These commands do not provide protection, thus requiring
correct operation. The sector address or time code field is displayed
when a disc is loaded.
Note:
1. Set correctly the disc type to be used on the Disc Type screen.
2. In case of an alarm, immediately press the
2. In case of an alarm, immediately press the
x
button to stop the
servo operation, and press the
[POWER]
button to turn the power
off.
Basic operation:
(controllable from front panel or remote commander)
(controllable from front panel or remote commander)
[POWER]
: Power OFF (release the Test Mode)
x
: Servo stop
A
: Stop and eject/Loading
[RETURN]
: Return to Operation Menu or Test
Mode Menu
.
,
>
: Transition between sub modes of menu
[1] to [9], [10/0]
: Selection of menu items
Cursor [
q]/[Q]
: Increase/Decrease in manually
adjusted value
Click on the first or last page to see other AVD-S500ES service manuals if exist.